Plura LCM-119-3G User manual

LCM-3G SERIES
LCM-3G SERIES
Multi Format LCD Monitor
User’s Manual

LCM-3G SERIES
PRECAUTION----------------------------------------------------------- ERROR! BOOKMARK NOT DEFINED.
1. OVERVIEW--------------------------------------------------------- ERROR! BOOKMARK NOT DEFINED.
2. GENERAL FEATURES -------------------------------------------------------------------------------------8
3. FUNCTIONAL EXPLANATION OF EACH PART --------------------------------------------------------8
1) FRONT PANEL ---------------------------------------------------------------------------------------------8
LCM-119 ---------------------------------------------------------------------------------------------8
LCM-123 ---------------------------------------------------------------------------------------------9
Front Keys Arrangements ---------------------------------------------------------------------------9
Front Keys Operations-------------------------------------------------------------------------------9
Front panel LED Operations----------------------------------------------------------------------- 10
2) REAR PANEL -------------------------------------------------------------------------------------------- 10
LCM-119 ------------------------------------------------------------------------------------------- 10
LCM-123 ------------------------------------------------------------------------------------------- 10
Connection Details -------------------------------------------------------------------------------- 11
Interface description------------------------------------------------------------------------------- 11
4. MENU OVERVIEW ------------------------------------------------------------------------------------- 11
1) TO SHOW AND REMOVE THE MENU ---------------------------------------------------------------------- 12
2) TO GO TO THE NEXT LEVEL ------------------------------------------------------------------------------- 12
3) TO GO BACK TO THE PREVIOUS LEVEL --------------------------------------------------------------------- 12
4) TYPICAL MENU OPERATION ------------------------------------------------------------------------------ 12
5. BASIC OPERATION ------------------------------------------------------------------------------------ 12
1) TURNING ON THE MONITOR----------------------------------------------------------------------------- 12
2) ONSCREEN MENU LANGUAGE SELECTION---------------------------------------------------------------- 12
6. ON SCREEN MENU SELECTION AND ADJUSTMENT ----------------------------------------------- 13
1) HOW TO ADJUST THE OSD SCREEN ---------------------------------------------------------------------- 13
7. SELECT VIDEO INPUT --------------------------------------------------------------------------------- 14
1) HOW TO SELECT VIDEO SOURCE BY OSD----------------------------------------------------------------- 14
8. COLOR MENU ------------------------------------------------------------------------------------------ 15
1) ADJUST------------------------------------------------------------------------------------------------- 15

LCM-3G SERIES
2) COLOR SELECT ------------------------------------------------------------------------------------------ 15
3) BACKLIGHT ADJUST ------------------------------------------------------------------------------------- 15
4) GAMMA SELECT ----------------------------------------------------------------------------------------- 15
5) MONO/BLUE ONLY ------------------------------------------------------------------------------------- 16
9. IMAGE MENU ------------------------------------------------------------------------------------------ 16
1) ASPECT RATIO ------------------------------------------------------------------------------------------ 16
2) SCAN -------------------------------------------------------------------------------------------------- 16
3) ZOOM-------------------------------------------------------------------------------------------------- 16
4) NR (NOISE REDUCTION) -------------------------------------------------------------------------------- 17
5) PC MENU (PC MODE ONLY) ----------------------------------------------------------------------------- 17
10. MARKER MENU OPTIONS-------------------------------------------------------------------------- 17
1) MARKER & USER MARKER------------------------------------------------------------------------------- 17
2) SAFETY MARKER ---------------------------------------------------------------------------------------- 18
3) CENTER MAKER ----------------------------------------------------------------------------------------- 18
4) MARKER WIDTH ---------------------------------------------------------------------------------------- 18
5) MARKER COLOR ---------------------------------------------------------------------------------------- 19
6) SAFETY MARKER COLOR --------------------------------------------------------------------------------- 19
11. SYSTEM MENU -------------------------------------------------------------------------------------- 19
1) SETUP LOAD & SETUP SAVE ----------------------------------------------------------------------------- 19
2) FUNCTION KEY------------------------------------------------------------------------------------------ 20
3) ONSCREEN DISPLAY ------------------------------------------------------------------------------------ 20
OSD Option ---------------------------------------------------------------------------------------- 20
Under Monitor Display (color: Tally R/G mode action ) ----------------------------------------- 21
ID Style --------------------------------------------------------------------------------------------- 21
4) SET ID & ACTIVE SET ID -------------------------------------------------------------------------------- 21
12. ADVANCED MENU ---------------------------------------------------------------------------------- 22
1) ADVANCED --------------------------------------------------------------------------------------------- 22
2) INFORMATION ------------------------------------------------------------------------------------------ 22
3) OPTION ------------------------------------------------------------------------------------------------ 22
4) SCREEN CONTROL--------------------------------------------------------------------------------------- 22
5) NETWORK CONFIG -------------------------------------------------------------------------------------- 23

LCM-3G SERIES
13. PIP MENU (PICTURE IN PICTURE)----------------------------------------------------------------- 23
1) PIP ON/OFF------------------------------------------------------------------------------------------- 23
2) INPUT SOURCE------------------------------------------------------------------------------------------ 24
3) ASPECT RATIO ------------------------------------------------------------------------------------------ 24
4) POSITION----------------------------------------------------------------------------------------------- 24
5) PIP BLEND --------------------------------------------------------------------------------------------- 25
6) PIP SWAP ---------------------------------------------------------------------------------------------- 25
14. OSD TREE -------------------------------------------------------------------------------------------- 26
1) COLOR ------------------------------------------------------------------------------------------------- 27
2) IMAGE-------------------------------------------------------------------------------------------------- 27
3) MARKER------------------------------------------------------------------------------------------------ 28
4) SYSTEM ------------------------------------------------------------------------------------------------ 29
5) ADVANCED --------------------------------------------------------------------------------------------- 30
6) PIP ---------------------------------------------------------------------------------------------------- 31
15. SPECIFICATIONS------------------------------------------------ ERROR! BOOKMARK NOT DEFINED.
1) Panel & SUPPORTED SIGNALS -------------------------------------------------------------------------- 32
2) SUPPORTED TIMINGS ----------------------------------------------------------------------------------- 345
PC & DVI input ------------------------------------------------------------------------------------ 34
3) MECHANICAL DIMENSION ------------------------------------------------------------------------------- 36
LCM-207 ------------------------------------------------------------------------------------------- 38
LCM-209 ---------------------------------------------------------- Error! Bookmark not defined.7
LCM-119 ------------------------------------------------------------------------------------------- 38
LCM-123 ---------------------------------------------------------- Error! Bookmark not defined.8
LCM-132 ------------------------------------------------------------------------------------------ 389
LCM-147(TBD) ---------------------------------------------------- Error! Bookmark not defined.9

LCM-3G SERIES
Precaution
Before operating the set, please read this manual carefully.
WARNING:
To reduce the risk of any electric shock, do not remove back cover as there are no user serv
iceable parts inside. Please refer to Plura or a qualified service personnel/agent. To prevent
fire or shock hazard, do not expose the rear side of the unit to rain or moisture. Do not rub or
clean the Active Matrix LCD with any harsh surface as this may scratch, mark, or damage the
Active Matrix LCD permanently.
CAUTION:
Unauthorized tampering with the inside of the monitor voids the warranty.
The manufacturer shall not warrant for any damage caused by improper maintenance and/or
repair by any third party.
Important safeguards for you and your new product:
Please read and observe the following safety points when installing and using your new devi
ce and save them for future reference.
1. Read Instructions
2. Follow Instructions
All operating and use instructions should be followed.
3. Retain Instructions
The safety and operating instructions should be retained for future reference.
4. Observe Warnings
All warnings on the product and in the operating instructions should be adhered to.
5. Cleaning

LCM-3G SERIES
Disconnect the unit from the mains before cleaning. Do not use abrasive cleaners. Use a
damp cloth for cleaning.
6. Water and Moisture
Do not use this unit near water.
7. Transportation
A product should be transported with care. Excessive force and uneven surfaces may
cause the damage to product.
8. Attachments
Do not use attachments not recommended by Plura as they may cause hazards.
9. Ventilation
Do not block any of the ventilation openings.
Install in accordance with the manufacturer ’ s instructions.
10. Power Sources
This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply, consult your power
company.
11. Power Lead Polarization
This product is equipped with a three-wire grounding-type cord. This is a safety feature.
Do not use an alternative power cord.
12. Power Cord Protection
Power-supply cords should be protected so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles and the point where they exit from the product.
13. Outdoor Cable Grounding
If an outdoor cable is connected to the product, be sure the cable is grounded to provide
some protection against voltage surges and built-up static charges. A “ face plate ” also
needs to be installed with an isolating capacitor to prevent any damage from static.
14. Lightning
For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet. This will
prevent possible damage to the product due to lightning and power-line surges.
15. Earthling the product
This product must be earthed properly to comply with the safety regulations in the
country of use. If you are unsure of these regulations, please consult a qualified
electrician.

LCM-3G SERIES
16. Servicing
Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltages or other hazards. Refer all servicing to qualified
service personnel. If the device does not operate properly, switch it off and call your
dealer.
17. Service
Turn this product off, unplug from the mains supply and refer servicing to qualified
service personnel under the following conditions:
A. If the power-supply cord or plug is damaged.
B. If the LCD has been damaged.
C. If water or moisture penetrated the glass and/or the LCD screen.
D. If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal
operation.
E. If the product has been dropped or the frame has been damaged.
F. If the product exhibits a distinct change in performance.
18. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to p
erform safety checks to determine that the product is in proper operating condition and t
he front seal is intact .
19. Mounting
The product should be mounted on a wall only as recommended in the instructions.
20. Power
This device operates on an AC supply; the voltage is as indicated on the label on the
Manual. This device must be earthed at all times through the chassis as well as through
the power lead.

LCM-3G SERIES
1. OVERVIEW
LCM Series consists of high quality HD LCD monitors, specifically designed for use in
Broadcast environment ensuring accurate color reproduction in accordance with SMPTE, EBU,
REC 709 Broadcast Standards. It supports up to 3Gbps-1080-60P along with all other Digital & Analog
inputs & formats, Composite/RGB/PC-RGB/DVI/HDMI/Component.
2. GENERAL FEATURES
• SDI 2 Input / 2 Output.
• Color Temperature – User, VAR, 11000K, 9300K, 7500K, 6500K, 5000K and 3200K
• Over Scan/Under Scan/ 1:1 scan/ Zoom
• PIP (Picture In Picture)/PIP Blend
• Supports VESA DDC2B and a subset of VESA standards.
• Single board is suitable for mounting behind an LCD panel.
• Supported ETHERNET/Firmware Upgrade.
• OSD: Graphic based OSD, 6 Languages (UNICODE System).
• LCD Dimming Control
- Manual Dimming Level Control.
• ETHERNET: Network System Controller / Update
•Rack Mount.
3. Functional explanation of each part
1) Front Panel
LCM-119
Center Maker
Marker
Front Key

LCM-3G SERIES
LCM-123
Front Keys Arrangements
Front Keys Operations
Key Name
Operation
STANDBY
►Power ON/OFF Button. This button is operated after being pressed about 3 seconds.
SEL/INPUT
►Activates OSD menu of selected input source.
►Changes input source.
►Executes functions (by OSD help commands) in main OSD menu.
DOWN
►Decreases values of user menu in main OSD menu.
►Executes function (by OSD help commands) in main OSD menu.
UP
►Increases values of user menu in main OSD menu.
►Executes function (by OSD help commands) in main OSD menu.
MENU
►Activates main OSD menu.
►Navigates higher menu in main OSD menu.
►Exits OSD menu.
Center Maker
Marker
Front Key

LCM-3G SERIES
FUNCTION
►Executes user selected functions
UNDEF, Aspect, Zoom, Color tepm, Gamma select, PIP, PIP Source, PIP size, PIP Position,
PIP Swap, Input Composite, Input PC, Input HDMI, Input DVI
SCAN
►Executes Scan function ( Over-Scan -> Zero-Scan -> Under Scan-> Pixel to Pixel)
MARKER
►Draw Marker on Screen ( Off -> 16:9 -> 4:3 … -> 2.35:1 )
SDI 1
►Select SDI 1 source directly
SDI 2
►Select SDI 2 source directly
ANALOG
►Select ANALOG source directly
( ‘Composite1’ ->‘Composite2’ ->‘Composite3’ -> ‘S-video’ -> ’G.B.R’ -> ‘Y.Pb.Pr’ -> ’PC’ )
Front panel LED Operations
- Green Led will be ON when Power is ON
2) Rear Panel
LCM-119
LCM-123

LCM-3G SERIES
Connection Details
Interface description
Interface
Description
SDI 1 IN
SDI Input
SDI 2 IN
SDI 1 OUT
SDI 1 Loop Through Output.
SDI 2 OUT
SDI 2 Loop Through Output.
RS-232 IN
Update/Multi Control/Auto color calibration
HDMI
High Definition Multimedia Input
DVI
High Definition Multimedia Input Compatible
ETHERNET UPDATE
ETHERNET/Firmware Upgrade
VGA
Analog PC-RGB Video Input
CVBS1/Pr/R In
GBR (SOG sync) Input
Y, Pb, Pr Component Video Input
CVBS / Composite/S-Video Input
CVBS2/Y/G/Y In
CVBS3/Pb/B/C In
AC IN
AC 90V ~ 240V, 50Hz/60Hz
4. MENU OVERVIEW
In this menu system, there are several ways to customize the menu settings provided.
Most menu consist of three levels to set up the options, but some require greater depth for the variety of
settings. If you press the MENU button, only the first and second level of the menu system will appear on
the monitor screen. The third level can be displayed by pressing SEL/INPUT. If a menu has more than
three levels, the pop-up dialogue box will be displayed as the fourth or fifth level.

LCM-3G SERIES
1) To show and remove the Menu
Press the MENU button to display the menu. A second press of the MENU button will take you back to
monitor viewing.
2) To go to the next level
Press SEL/INPUT button.
3) To go back to the previous level
Press MENU button
4) Typical Menu Operation
1. Press MENU button: The main menu will appear.
2. Use UP/DOWN button to select the desired menu option (icon).
3. While the desired menu option is selected, press SEL/INPUT to move to the second level.
4. Use UP/DOWN button to select the second menu option.
5. Press SEL/INPUT to move to the third level: Some menu options require additional steps.
6. Press MENU to return to the previous menu to return to monitor viewing.
5. BASIC OPERATION
1) Turning On the Monitor
1. First, connect power cord correctly. At this moment, the monitor switches to standby or power on
mode. In standby mode, in order to turn monitor on, press the ST-BY button.
2. Select the viewing source by using SEL/INPUT button on Keypad in front of monitor
2) On Screen Menu Language Selection
- SETUP -> On Screen Display -> OSD Option -> Language
- The menu can be shown on the screen in the selected language.
- Supported Language: English, Spanish, Portuguese, German,
French, Italian

LCM-3G SERIES
6. On Screen Menu Selection and Adjustment
1) How to adjust the OSD screen
1. Press the MENU button and then UP/DOWN button to select each menu.
2. Press the SEL/INPUT button and then use UP/DOWN (SEL/INPUT)/MENU button to display the
available menu.
• Your monitor's OSD (On Screen Display) may differ slightly from what is shown in this manual

LCM-3G SERIES
7. SELECT VIDEO INPUT
1) How to Select Video Source by OSD
1. Press the SET/INPUT button and then UP/DOWN button to select the desired video source.
2. Press the SET/INPUT button to go to desired video source.
3. If Input Name is enabled, The SET/INPUT button goes into input name edit mode instead of selecting
source.

LCM-3G SERIES
8. Color MENU
1) Adjust
- Adjust the values of Brightness, Contrast, Color, Tint and
Sharpness directly from -50 to 50
Contrast, Brightness, Sharpness, Color (All Sources), Tint (except
PC, Component), Phase (Component).
2) Color Select
- For Setting the Color temperature or adjusting RGB gain value
directly
- User (User setting RGB gain value), VAR(3200K ~ 11000K), Often
used value(11000K, 9300K, 6500K, 5400K,3200K)
3) Backlight Adjust
-Inverter dimming Level select (0~100)
4) Gamma select
- Gamma Level Select (0.8 ~ 3.0)

LCM-3G SERIES
5) Mono/Blue Only
- Mono color: For selecting monochrome images
- Blue Only: Images have only blue color
9. Image MENU
1) Aspect Ratio
- For setting the aspect ratio.
- Full Screen: The images are displayed with a panel size.
- Full Screen, 16:9, 4:3, 14:9, 13:9, 1.85:1, 2.35:1: The images are
displayed with each aspect ratio.
- PC mode: Full Screen & 4:3 only
- Function Aspect: For setting the Aspect to use by Function KEY
controller.
2) Scan
1. Over Scan – 95% input size and fit the selected display size
2. Zero Scan – 100% Input size and fit the selected display size
3. Under Scan – 105% Input size and fit the selected display size
3. Pixel to Pixel – Display size is an input size. If input resolution is
bigger than panel size, fit the panel size
3) Zoom
- Can see the enlarged picture by (2X, 3X, 4X, 5X) ratios.
- If user select the Zoom 2X, can see the below yellow box in

LCM-3G SERIES
picture.
- Press Select or Enter button, user can see the enlarged picture.
- Menu key escape the zoom mode.
- Example (3X3)
Zoom X position: Coordinate of video image’s column position.
Zoom Y position: Coordinate of video image’s row position.
4) NR (Noise Reduction)
Noise Reduction on/off (NR is for Video signal SD-SDI, Composite, S-Video, Y/Pb/Pr, DTV timing)
5) PC Menu (pc mode only)
- Only operate PC input mode
- Select Auto-adjust and adjust Phase, HV position, Frequency
- Auto-Adjust automatically set the optimum values of Phase, HV
position and Frequency.
10. Marker MENU OPTIONS
1) Marker & User Marker
< Marker >
< User Marker >
LCM-3G SERIES
picture.
- Press Select or Enter button, user can see the enlarged picture.
- Menu key escape the zoom mode.
- Example (3X3)
Zoom X position: Coordinate of video image’s column position.
Zoom Y position: Coordinate of video image’s row position.
4) NR (Noise Reduction)
Noise Reduction on/off (NR is for Video signal SD-SDI, Composite, S-Video, Y/Pb/Pr, DTV timing)
5) PC Menu (pc mode only)
- Only operate PC input mode
- Select Auto-adjust and adjust Phase, HV position, Frequency
- Auto-Adjust automatically set the optimum values of Phase, HV
position and Frequency.
10. Marker MENU OPTIONS
1) Marker & User Marker
< Marker >
< User Marker >
LCM-3G SERIES
picture.
- Press Select or Enter button, user can see the enlarged picture.
- Menu key escape the zoom mode.
- Example (3X3)
Zoom X position: Coordinate of video image’s column position.
Zoom Y position: Coordinate of video image’s row position.
4) NR (Noise Reduction)
Noise Reduction on/off (NR is for Video signal SD-SDI, Composite, S-Video, Y/Pb/Pr, DTV timing)
5) PC Menu (pc mode only)
- Only operate PC input mode
- Select Auto-adjust and adjust Phase, HV position, Frequency
- Auto-Adjust automatically set the optimum values of Phase, HV
position and Frequency.
10. Marker MENU OPTIONS
1) Marker & User Marker
< Marker >
< User Marker >

LCM-3G SERIES
1. Marker : 16:9, 4:3, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1&4:3, User1, User2, User3 fitted panel size
marker on screen.
2. User Marker: The user Marker size. (Below panel size)
Example (1440x900 panel)
16:9 (16:9 Marker) 16:9 (4:3 Marker)
2) Safety Marker
-Safety Area: Draw dotted line Marker on screen for graphics and
logo applications. (16:9 95/93/90/88/80%, 4:3 95/93/90/88/80%,
EBU Action 16:9/14:9/4:3, EBU Graphic 16:9/14:9/4:3)
3) Center Maker
-“+” Marker on center of screen
4) Marker Width
-Marker line thickness setting. (0~10)

LCM-3G SERIES
5) Marker Color
- Marker Line Color: Select Marker line color (White, Yellow, Blue,
RED, Black)
6) Safety Marker Color
- Safety Line Color: Select Safety line color (White, Yellow, Blue,
RED, Black)
11. System MENU
1) Setup Load & Setup Save
- Setup Load: Load user saved values or default value
- Setup Save: Save user setting values at user 1, 2, 3.

LCM-3G SERIES
2) Function Key
- Function Key: Select the function to be allocated to the FUNCTION buttons
Function Key
Description
UNDEF
Not set (no function allocated)
Aspect
Sets the aspect ratio of the images
Zoom
Zoom function is operated(Off, 2x, 3x, 4x, 5x)
Color Temp
User (User setting RGB gain value), VAR(3200K ~ 11000K), Often
used value(11000K, 9300K, 6500K, 5400K,3200K)
Gamma Select
Select Gamma curve
PIP
PIP on/off
PIP Source
PIP input Source can operate with different signal and type.
PIP size
Choose PIP size of Small/POP1/POP2
PIP Position
Choose the pip position on the each corner of the pane
PIP Swap
Using Swap option, you can exchange two programs or source at the
same time.
Input Composite
Switches the input source.
Input PC
Input HDMI
Input DVI
3) On Screen Display
OSD Option
Language: Select a language for the menu to appear in.
(English, Spanish, Portuguese, German, French, Italian)
OSD Position: L-T, R-T, C, L-B, R-B
Message OSD: Input Source Message on/off.
OSD Transparency: Disable blending OSD background with video
image.