Polaris CM50 User manual

CM50 Wiring Instructions
WARNING
Option 1: Reverse only
Option 2: Continuous Operation
1.
2.
3.
4.
5.
6.
Option 3: Reverse trigger with continuous override
Connect red ( + ) to Positive
Connect black ( - ) to Negative
This is a 12 / 24 Volt system
Plug in all wiring as per diagram
Do not connect 12 / 24 volt supply
until monitor and camera are
connected
Warranty is voided if you cut or
modify any of the cabling (excludes
positive and negative wires)
Optional Wiring Diagrams
(uses a double pole dash mounted switch)
1 2 3 4 5
Toggle between camera views
Toggle between menu functions
Power on/ off
Decrease
Increase
1.
2.
3.
4.
5.
CM50 User Manual &
Wiring instructions
Menu Functions
Brightness: Adjust brightness
Contrast: Adjust contrast
Colour: Adjust colour
Hue: Adjust hue
Volume: Only applicable if cam has mic
Zoom: Changes aspect ratio
TCON (LD, RD, TU. LU): Reverse image
/flip image upside down
Language: Change language
Reset: Reset all settings to factory

Weight:
0.8kg
Resolution
800x480
Power Input
12-24V
Video Form
NTSC, PAL
Power Consumption
0.5A
Display method
LCD
Operating Temperature
0° to 60°
LCD Dimensions
(W) 10.cm x (H) 6.2cm / 5"
Monitor Dimensions
(W) 14.2cm x (H) 9.8cm x (D) 2.5cm
Camera Inputs
2
Specifications