Prevue Hendryx 21008 User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL customerservice @ prevuepet.com
98012+21008 — 11 /23 — A4 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
1PIECES
2PIECES Place the removable grille into the base and
slide the pull-out tray into the opening.
Set the assembled mesh into the base.
Hook the side panels up under the
extended plastic tabs along the rim of
the base.
98012
Instructions online at www.prevuepet.com
MODEL # Parakeet Manor Cage
ASSEMBLY
21008
MODEL #
Add the right side panel to the back panel. Start at the
bottom and fully pull the “R” hook over the vertical wire.
Continue up the seam until all are fully linked.
Weave the front panel/left side
seam together using the same
method to create the cage body.

98012+21008 — 11 /23 — A4 For more wonderful cages, toys, and accessories for cats, irds, chickens, ra its, ferrets, dogs and small animals, visit www.prevuepet.com
3PIECES
4PIECES
Assembly completed. {
Slide the cup
doors up and
insert cups
into place.
Install the perch ends
on vertical wires, with
the bottom resting
on a horizontal wire
for stability.
Start by hooking the swing onto the peak
of the roof.
Add the roof to the cage by catching the
inner wire on the tabs along one side,
and then the opposite side.
*CLEANING INS RUC IONS
o prolong the life of your
new Prevue Pet Products
cage, we recommend:
→When cleaning the cage
and parts, use a soft cloth
or non-abrasive scrub
pad (such as Prevue’s
#109 Cage Saver).
→Wash all parts with warm
water and a mild, pet-safe,
environmentally friendly
soap.
→Rinse thoroughly.
→Hand dry all parts
completely with a soft dry
cotton cloth before
reassembling the cage.
→Do not leave plastic parts
in the sun to dry as they
may warp.