PROAIM CINEMA Series User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Airwave V520 Camera Shock Absorber Arm (11-44lb)
(VI-ARWV-520)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Airwave V520 Vibraon Arm with Dampener Airwave V520 Vibraon Arm Head
Airwave V520
Vibraon Isolator
2 x Spanner: (13, 21)
1 x L-Type
Allen Key (Size:5mm)
2 x Hex Nut
Flight Case

2
Airwave V520 Setup
• Loosen the clamp of the Airwave V520
Vibraon Arm to open it.
• Align the Airwave Arm to the Scaold pole
with the help of the Quick-lock Sca
Mechanism and properly ghten the knobs to
secure it.
NOTE: Airwave V520 Arm can be securely
aached to a Dia 38 to 42mm Scaold Pole or
Speed Rail with a quick-lock Sca Mechanism.
• The Airwave V520 Vibraon Arm has been
aached to the Scaold pole, as shown in the
image.
• Press the push pin buon at the head of the
arm and insert the arm head by sliding it.
• Aer aaching the arm head, properly
ghten the ratchet knob at the other side of
the head and secure it.
• Damping adjustment knob: If the arm is too
so, turn it towards direcon of H (Hard). If
the arm is rigid turn it towards the direcon
of S (So).
NOTE: The valves should always be adjusted
evenly and set idencally. Rebound and
compression of the hydraulic valves should be
set in such a way so that any loose swinging or
vibraon of the arm is eliminated.

3
• Airwave arm and the arm head have both
been securely aached to the Scaold pole.
• Remove the bolts of the Airwave Isolator with
the help of a 5mm Allen Key.
• Aer removing all the bolts of the isolator,
ip it around.
• Place the Ronin-Plate (Not Included) on the
Airwave Isolator. Match the threads of the
plate and the isolator, then insert bolts.
• Then properly ghten all the bolts with the
help of the 5mm Allen Key.
• Insert bolts to aach the Airwave Isolator to
the Airwave Arm Head by matching the
threads.
Airwave Vibraon Isolator Setup

4
• Properly ghten all the bolts of the Airwave
Isolator with the help of an Allen key.
• Panning movement can be facilitated by
loosening the damping adjustment knob at
the front of the Airwave Arm Head.
NOTE: Dampeners have built-in damping
adjustment knobs that smoothen all the sudden
jerks, vibraons, and movement.
• Loosen the damping adjustment knobs to
facilitate movement for the Airwave Arm
Head.
• Tilng movement can be facilitated by
loosening the damping adjustment knob at
the side of the Airwave Arm Head.
• Unlock the quick release plate and aach the
Gimbal (Not Included) by sliding it onto the
plate.
Tilng
Panning

5
• Aer aaching the Gimbal (Not Included),
push the lock lever of the quick release plate
to securely lock it in.
• Slide and mount the camera (Not Included) to
the Gimbal, as shown in the image.
• Aer mounng the camera (Not Included)
securely lock its posion with the help of the
lock lever.
• Airwave V520 Vibraon Setup is ready to use.

6
YOUR PROAIM AIRWAVE V520 CAMERA SHOCK ABSORBER ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.