PROAIM JB-VG08-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
8' Vega Jib Crane for DSLR Video Cameras
(JB-VG08-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Vega Jib Front Secon
Assembly Manua l
Vega Jib End Secon
Handle
2 x L-Type Allen Keys
(Sizes: 3/16 & 1/8)
Counter Weight with ower Knob

2
• Aer opening the end secon, loosen the
boom and side knobs of the Central Fork.
• Now, the end secon is properly open.
Feature: The Central Fork mechanism
facilitates ultra-smooth pan-lt movements
while absorbing unwanted vibraons for
cleaner shots.
• Mount the end secon of the Vega Jib on
the Jib Stand (Not Included).
End Secon Assembly
Vega Jib Setup
• Open the end secon of Vega Jib, as shown
in the image.
• Aer mounng the end secon, re-ghten
the knobs.
• Loosen and remove the top knob of the end
secon.

3
• The front secon has connecng bars
aached at both ends.
• Slide the front secon into the slot of the
middle secon.
Front Secon Assembly
• Loosen and remove the center knob of the
end secon.
• To detach the handles from one another,
loosen them by turning them in a circular
moon.
Feature: The Camera Crane can be controlled
using the handle.
• Remove the washer from the handle.
• Insert the handle into the hole of the end
secon of the Vega Jib, as shown in the
image.
Handle Assembly
• Tighten the locking knobs to secure the Jib
secons.

4
• Aer inserng the handle, aach the
handle to the jib from the other side.
• Now, aach the handle.
• Aer mounng the Quick Release Plate,
insert the bolts from the boom side of the
Camera mounng plate.
Camera Mounng Plate
• Insert a 1/4" bolt from the boom of the
extension Camera plate to secure the Quick
Release Plate and ghten it with the Allen
key.
• Unlock the lever lock of the Quick Release
Plate.
• Slide the Gimbal (Not Included) onto the
Quick Release Plate and lock it using the
locking lever.
• Mount the Quick Release Plate
(Not Included) on the Camera mounng
plate of the Vega Jib.

5
• Insert the weight (Not Included) inside the
weight Rod.
NOTE: Use the weights according to your
camera weight setup requirements.
• Monitor each frame by aaching a monitor
(Not Included) to the Jib using the oponal
Universal Clamp with 13"arculang double
arms and 3/8"-16 Threaded Stud.
YOUR PROAIM 8' VEGA JIB CRANE FOR DSLR VIDEO CAMERAS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
• Now, the Gimbal is completely secured, as
shown in the image.

6
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.