PROAIM CINEMA Series User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Flyking PRO 4 Mitchell Video Camera
Slider for Videomakers (SL-FLPR-4)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim Flyking Pro Slider 4 with Mitchell Key
Bag Packing

2
Flyking PRO 4 Mitchell Slider Setup
• Loosen the castle ring present at the backside
of the Mitchell Slider using a castle wrench.
• Aer loosening the castle ring, remove it from
the Mitchell slider.
• Mount the Mitchell slider on a Mitchell stand
(Not Included), as shown in the image.
• The Mitchell Slider is successfully mounted on
the Mitchell stand (Not Included).
• Aer mounng the slider, re-insert the castle
ring from the boom of the slider.
• Now, ghten the castle ring using a castle
wrench.
• The castle ring has been properly aached to
the slider, ensuring a secure aachment
between the slider and the Mitchell stand
(Not Included).

3
• The lever of the Mitchell Slider can be used to
move it in a panning move per your
requirement.
• Loosen the magnec stoppers and move them
to the desired posion.
NOTE: Adjust the rail length per your shoong
requirement by seng the magnec stoppers at
the desired length.
• Loosen and remove the castle ring of the Fluid
head (Not Included).
• Posion the magnec stopper anywhere on
the rail and secure the posion by ipping the
knob.
NOTE: The slider is equipped with adjustable
magnec stoppers that minimize the jarring
caused by sudden slide stops during gliding
shots, ensuring a smooth, jerk-free nish.
• Mount the Fluid head (Not Included) on the
Mitchell slider.
NOTE: It provides a full 360° sweeping pan with
an easy-to-use lever that safely locks the
carriage in your desired posion.

4
• Aer mounng the Mitchell uid head
(Not Included), ghten the castle ring from the
boom to secure the Fluid head.
• Press the knob of the Fluid head and release
the top plate.
• Aach the top plate of the uid head with the
Camera (Not Included) by matching their
threads and secure them using a screwdriver.
• Aer mounng the Camera, press the locking
lever of the uid head to lock the aachment.
• Slide the Camera (Not Included) onto the Fluid
head.
• Loosen the knob of the Mitchell plate of the
slider and move the plate per your
requirement.

5
• You can rmly lock the posion of the Mitchell
plate using the knob, as shown in the image.
NOTE: With a minimum working height of 13cm,
the slider lets users capture shots from a
relavely lower angle.
NOTE: It delivers stunning shots in over-slung
and under-slung camera conguraons with a
Mitchell base and top, giving you versale
camera head and tripod mounng opons.
Features: The Slider features a stronger-than-
ever braking system with adjustable magnec
stoppers that minimize the jarring caused by
sudden slide stops during gliding shots, ensuring
a smooth, jerk-free nish.
• The Slider is ready to use.
YOUR PROAIM FLYKING PRO 4FT MITCHELL VIDEO CAMERA SLIDER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)