PROAIM SnapRig SR228 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Basic Shoulder Mount Kit
(SR228)
Assembly Manua l
3 x 300mm long Rod (Dia=15mm)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Shoulder Pad
2 x Grip Handles
Juncon AdapterCamera Plate
Bolt (Size:3/8”)
Bolt (Size:1/4”)

2
Basic Shoulder Mount Setup
 Now loosen the knob of the grip handle and
insert the le side of the 300mm long rod.
 Then properly ghten both the knobs, as
shown in the image.
 Now loosen the top knob of the juncon
adapter and insert the 300mm long rod (Dia
15mm).
 Then insert another 300mm long rod (Dia
15mm) and ghten the knob properly, as
shown in the image.
 Loosen both the knobs of the Juncon Adapter
and insert 300mm long rod (Dia 15mm).
 Then properly ghten the knob. Repeat the
same process for the other grip handle.
NOTE: It minimizes rotaon while shoong
video with your camera, making your shoulder
comfortable and shots more stable.

3
 Now loosen the knob of the shoulder pad and
secure it properly by inserng it into the rods.
NOTE: The shoulder pad has mulple 1/4"-20
threads, so you can mount other accessories
too.
 Then properly ghten both the knobs, as
shown in the image.
NOTE: Rubber padding on the camera base
plate prevents the Camera from twisng or
scratching.
 Now loosen the knob of the shoulder pad and
adjust it according to your requirement.
NOTE: You can ghten the rod support with
this knob, oering easy and quick operaon.
 Mount the Camera (Not-Included) on the
shoulder pad and ghten it properly with the
help of a screw driver.
NOTE: The Rig has a camera base plate that
features mulple mounng threads for easy
mounng on dierent plates and rigs. Also, it
features a 15mm rod support and securely
mounts your Camera using 1/4"-20 and 3/8"-16
camera mounng screws.
 Now loosen both the knobs of the camera
plate and insert the rods into the plate.
NOTE: The shoulder pad allows the Rig to sit
comfortably on your shoulders by eliminang
the discomfort caused by the Camera's weight
on your shoulder during lming.

4
NOTE: Dual handgrip kit oers both comfort and balance with its two 360° rotatable handgrips that
securely mount onto the rods with a 15mm rod clamp.
YOUR PROAIM SNAPRIG BASIC SHOULDER MOUNT KIT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.