PROAIM P-MC-CNL User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Moon Control System (P-MC-CNL)
Assembly Manua l
Remote Controller
Camera Plate with Motor
3m Wire
12v Adapter
Knob

2
 Aach one end of the provided 3m wire to
the motor and another end to the remote.
 Pull the lever to aach the motor to the
slider, as shown in the image.
 Screw the uid head (Not Included) onto the
camera mounng plate and detach the
quick release plate of the uid head to
mount the camera.
Moon Control System Setup
 Aach the camera mounng plate onto the
slider and ghten it using the provided knob.
Tighten This Knob

3
YOUR PROAIM MOTION CONTROL SYSTEM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.