PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Acon-King 8” Sucon Mount Car Camera
Rigging System (CM-ACKG-01)
Assembly Manual
2x 8''Sucon Cup
3 x 6'' pipe with 42mm OD 2x Safety Straps
5 x 360° Rotang Speed Rail Clamp 2 x Washer
Flight Case
Bolt and 5mm Allen Key

2
 Press the hidden buon on the bumper panel
in the front of the vehicle, and remove it, as
shown in the image.
 Loosen and remove the washer from the 6''
pipe quickly with the help of a 5mm Allen key.
 Insert a toe hook (Not included) into the
hidden panel and ghten it correctly.
Note: The toe hook's purpose is to help you
set up your setup easily.
6'' pipe with 360° Rail Clamp Setup
 Now, place one washer on the top of the toe
hook such that their holes align with each
other. Screw in the other washer from the
boom.
 Now, loosen the 360° rotang speed rail
clamp and aach one end to the 6" pipe.
 Insert the washer screw into the 6" pipe, then
ghten them properly with the help of a 5mm
Allen key.

3
 Insert the rod (Not Included) into the other
end of the speed rail clamp and ghten it cor-
rectly with the help of a 5mm Allen key.
 Place your sucon cup in the selected posion
on the car surface. Next, press the sucon
pump to create a vacuum between the suc-
on cup and the car surface. Finally, release
the pump to mount the sucon cup properly.
 Insert the 6" pipe on the sucon cup into one
end of the 360° rotang speed rail clamp.
Then, insert a rod (Not included) into the oth-
er end of the clamp.
 Although the sucon cup holding force is
adequate for regular driving shots, you must
use safety belts/tension straps for addional
security. When mounted on cars, properly
secure the objects aached to the sucon cup
(e.g. camera, gimbal, etc.). Use rubber sleeves
to avoid dents and scratches on car paint.
Tighten safety straps carefully to prevent
damages.
 Aer inserng the rod, ghten the clamp
properly with the help of a 5mm Allen key.
Sucon Cup Setup
To guarantee proper adhesion of sucon cups, check that the cup surfaces & mounng surface is clean,
dry & dust-free. Please mount it on smooth, even & non-porous surfaces.

4
YOUR PROAIM ACTION-KING 8” SUCTION MOUNT CAR CAMERA RIGGING SYSTEM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 Your setup is ready to use.
Note: Test all xtures before driving .