real living Adirondack JK89002W User manual

GENERAL BEST PRACTICES FOR ASSEMBLY:
Read all instructions before starting
Clear a flat covered space to being
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the products
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
WARNINGS:
Use the correct screws as indicated. All screws should be hand tightened until the complete piece is assembled
( This will make the assembly process much easier ). Once the piece is fully assembled, then go back and tighten
all screws with provided tool.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product
construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical
wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
The chair is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
The chair is used at weight of 250lb (113.4kg). Improper use of this product or failure to use as directed may
result in injury. Not intended for commercial use.

PARTS LIST
A B C D
1PC Seat
Panel
1PC Backrest
Panel
1PC Left Foot
Panel
1PC Right Foot
Panel
E F G K
1PC Left Arm Panel 1PC Right Arm
Panel
1PC Front Support
Panel
1PC Back Support
Panel
HARDWARE LIST
HI J
)mm06(wercSSCP8
M N
1PC Allen
Wrench
1PC Open End Wrench
STEP 1
2 PCS Screw (80mm)
6 PCS Screw (50mm)

STEP 2
STEP 3

STEP 4
Note: Do not tighten all screws until last