real living SAVANNAH POLYWOOD SR-K-620PBD User manual

TM
SAVANNAH POLYWOOD
PARK BENCH
ASSEMBLY INSTRUCTION
ITEM#: SR-K-620PBD
SKU# 810557333
Big Lots Stores, Inc. P.O. Box 28523; Columbus, OH 43228-0523 / Made In China
Need help? We are here for you!
Please contact 1-800-457-4652 or contact us at
www.numarkcustomerservice.com for assistance
TM
1

MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
* Determine you have adequate space for assembly from any obstruction, including buildings, tree limbs,
and electrical wires.
* Assembly by two adults is recommended
* Keep children away during assembly. This item contains small parts which can be swallowed by children. Children
should always be under adult supervision while using this product.
* Always inspect the bench during each use for any obstructions.
* Do not discard any of the packaging until you have checked that you have all the parts and fittings.
* Retain the assembly instructions for future reference.
* The manufacturer will not accept responsibility for unauthorized repairs or modifications to this product.
Weight limit: 400lbs
This product is for residential use only, not for commercial use.
Do not stand on product or use as a step ladder.
For optimum safety, use on even surface only!
Improper use of this product or failure to use as directed may result in injury.
* Annually:
* Check all nuts and bolts for tightness each season and more often if used frequently.
* Oil all metal moving parts with a general purpose lubricating oil to ensure proper performance and safety.
* To clean, wash frame with mild soap and water; rinse thoroughly. Dry frame completely.
* Do not use bleach, acid, or other solvents on the frame parts.
* To prolong the life of your bench we recommend storage in a dry area when not in use or during
austere weather conditions.
2

PARTS LIST
HARDWARE LIST
BCDA
x 1
Right Arm
x 1
Left Arm
x 1
Seat
x 1
Back
Ea Ec Ed
x 6
Bolt
Eb
x 4
Sunk Screw
x 6
Metal Washer
x 1
Allen Wrench
3
STEP 1
A
C
B
Ec
Ea
Ec
x 4 x 4
Ea
Attach the arms (A&B) to the seat (C) with 2
bolts (Ea) and 2 metal washers (Ec).
Do not tighten completely.
Repeat procedure for the other side.

STEP 2
STEP 3
Turn the bench over. Securely tighten all bolts.
4
AC
B
Ea
Ec
Ec
x 2 x 2
Ea
Attach the arms (A&B) to the seat (C) with 1
bolt (Ea) and 1 metal washer (Ec).
Do not tighten completely.
Repeat procedure for the other side.
x 4
Eb
Attach the back (D) to the arm (B) with 2 sunk
screws (Eb). Note: the arrow points per drawing
when assemble.
Do not tighten completely.
Repeat procedure for the other side.
A
C
B
D
A
D
Eb