real living OAKMONT 5PC ALL WEATHER WICKER SET User manual

custom[email protected]
OAKMONT 5PC ALL WEATHER WICKER SET -
1 SOFA AND 2 OTTOMAN
Need help? We are here for you! 1-888-733-8169 24/7 Toll Free
Or email us at custom[email protected], custom[email protected]
ASSEMBLY INSTRUCTION
ITEM# : GBO19-019-2 / GBO19-019-2NAVY
SKU# 810405349 / 810460104

STAIN RESISTANT CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE IN RAINING DAY.
SPILLS:
Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allow cushions to air
dry.
FABRIC CARE: Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.
ALL WEATHER WICKER PRODUCT CARE
Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a
mild solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Over time
screws can loosen. Occasinally, check screws on all ottomans and sofa, re-tighten if necessary.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
The sofa and ottomans are not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces
only.
The sofa is used at weight of 600lb (272.7kg),the ottoman is used at weight of 250lb(113.6kg).Improper use
of the products or failure to use as directed may result in injury. Not intended for commercial use.
MAINTENANCE
WARNINGS:
Use the correct screws as indicated. All screws should be hand tight untill the complete piece is assembled
( This will make the assembly process much easier ). Once the piece is fully assembled, then go back and
tight all screws with provided tool.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the
product construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or
electrical wires.
Pay attention to orientation
Letter of the part corresponds to a stcker on the products
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
GENERAL BEST PRACTICES FOR ASSEMBLY:
Read all instructions before starting
Clear a flat covered space to being
Always best to do it with a friend
Note that hardware required is provided for every step

A1 A2 B
1PC Left Arm 1PC Right Arm 1PC Sofa back
C H I
1PC Seat Panel 3PC Seat Cushion 3PC Back Cushion
D E F
12PC Washer 4PC Screw(φ6x20mm) 8PC Screw(φ6x32mm)
G
1PC Allen Wrench
PARTS LIST
HARDWARE LIST

STEP 2
Secure right arm (A2) to assembled sofa back (B)
with 2 washers (D) and 2 screws
（
E) by using allen
wrench (G). Do not fully tighen now.
STEP 1
Secure sofa back (B) to left arm (A1) with 2 washers
(D) and 2 screws (E) by using allen wrench (G). Do
not fully tighen now.

STEP 4
Secure seat panel (C) to assembled sofa back (B)
with 4 washers (D) and 4 screws (F) by using allen
wrench (G). Verify the alignment and adjust, then
tighten all the screws.
STEP 3
Secure seat panel (C) to assembled sofa arms
(A1.A2) with 4 washers (D) and 4 screws (F) by
using allen wrech (G). Do not fully tighen now.