Reison 10-305 User manual

1
Radial clamp 10-305 including versions
Version
Description
Pole type
10-305
Clamp (EU 25x10 mm rail) with V-stud
Ø 16-20 mm
10-305-P
Clamp (EU 25x10 mm rail) with plane stud
Ø 16-20 mm
10-305-UK
Clamp (UK 1¼ ” x ¼ ” rail) with V-stud
Ø 16-20 mm
10-305-UK-P
Clamp (UK 1¼ ” x ¼ ” rail) with plane stud
Ø 16-20 mm
10-305-US
Clamp (US 1⅛ ’’ x ⅜ ’’ rail) with V-stud
Ø 16-20 mm
10-305-US-P
Clamp (US 1⅛ ’’ x ⅜ ’’ rail) with plane stud
Ø 16-20 mm
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2021-04-19
Document number: M10-305EN rev.01
Radial clamp 10-305
ENGLISH

2
Intended use
Clamp intended to attach and position accessories, with a pole size Ø 16-20 mm, to the accessory rail
on operating and examination tables. The product is to be used by medical professionals within a
medical facility.
Safety regulation
Maximum load: 25 kg, according to EN 60601-1 and EN 60601-2.
Before use, ensure correct function!
When loosening the lock levers to adjust the height or clamp position, support the accessory, to
prevent it from uncontrolled descend into the bottom position.
Service and preventive maintenance shall be performed by authorized personnel.
MAX 25 kg

3
User instruction
Installation
Usage
A.
B.
A.
B.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used. Wipe dry with
soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check the clamp lock
function and the function for positioning and locking the accessory pole in the clamp.
Annual service
Once a year the clamp shall be carefully cleaned, moving parts shall be lubricated, the locking function
shall be tested

5
Spare parts
Variant:
10-305
10-305-P
10-305-UK
10-305-UK-P
10-305-US
10-305-US-P
Description
Pcs.
Article no.
Article no.
Article no.
Article no.
Article no.
Article no.
1.
Clamp
1
11042
11042
11256
11256
11132
11132
2.
Guide
1
10320
10320
10320
10320
10320
10320
3.
Gear plate
1
11043
11043
11257
11257
11133
11133
4.
Gear cylinder
1
10316
10316
10316
10316
10316
10316
5.
Stud
1
10325
10429
10325
10429
10325
10429
6.
Lock handle
1
10346
10346
10346
10346
10346
10346
7.
Screw MKFT M4x8 A2
1
-
-
-
-
-
-
8.
Set screw MT6SS M5x6 A2
2
-
-
-
-
-
-
9.
Washer PB 5x10x5
1
-
-
-
-
-
-