Reison 10-390-K User manual

1
Arm surgery table 10-390-K including versions
Version
Description
10-390-K
Clamp (EU 25x10 mm rail)
10-390-KL
Clamp (EU 25x10 mm rail), long pole
10-390-K-US
Clamp (US 1⅛ ’’ x ⅜ ’’ rail)
10-390-UK-K
Clamp (UK 1¼ ” x ¼ ” rail)
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2020-10-30
Document number: M10-390-KEN rev.01
Arm surgery table 10-390-K
ENGLISH

2
Intended use
Arm surgery table for placement of patient arm during surgical treatment of arm and hand. The
product is to be used by medical professionals within a medical facility.
Safety regulation
Maximum load: 20 kg in even distribution, corresponding to a patient weight of 270 kg, according to
EN 60601-1 and EN 60601-2.
Before use, ensure correct function!
When loosening the lock lever to adjust the height, support underneath the arm table, to prevent it
from uncontrolled descend into the bottom position.
Remove the arm surgery table during transport!
Service and preventive maintenance shall be performed by authorized personnel.
MAX 20 kg (MAX 270 kg )

3
User instruction
Installation
1.
2.
90o
A.
B.
A.
B.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used on metal surfaces.
Wipe dry with soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. The lock function is
checked by locking and unlocking the top in different positions. If a cushion is used check that it is clean
and is not damaged.
Annual service
Once a year the arm table shall be carefully cleaned, moving parts shall be lubricated, the locking
function shall be tested.

5
Spare parts
Version:
10-390-K
10-390-KL
Description
Pcs.
Article no.
Article no.
1.
Frame
1
10549
12087
2.
Plate
1
10556
10556
3.
Blind rivet AS 4,8x12-F
8
-
-
4.
Mattress
1
10553
10553
5.
Plastic plug IFR 25x25x1,5
2
-
-
6.
Clamp body
2
EU: 10031
US: 10547
UK: 10543
EU: 10031
7.
Washer
2
10004
10004
8.
Screw MF6S M6x12 A2
2
-
-
9.
Guide
2
10053
10053
10.
Adjustable lock lever
2
6-593-65
6-593-65
11.
Screw MC6S M6x35 FZ
4
-
-
12.
Shaft
2
10009
10009
13.
Spring
2
10013
10013
14.
Pressure pin
2
10012
10012
15.
Plunger
2
10711
10711
16.
Eccentric
2
11165
11165
17.
Lock lever
2
10014
10014
18.
Ball
2
K20M8S
K20M8S

6
Technical specification
Maximum work load
20 kg in even distribution, corresponding to a patient weight of 270 kg,
according to EN 60601-1 and EN 60601-2
Material arm surgery table
Stainless steel
High pressure laminate
Version
UDI-DI
Weight
Dimension
(H x W x L)
10-390-K
07350111830731
6,7 kg
200 x 340 x 625 mm
10-390-KL
07350111830748
9,2 kg
350 x 340 x 625 mm
10-390-K-US
07350111830755
6,7 kg
200 x 340 x 625 mm
10-390-UK-K
07350111830786
6,7 kg
200 x 340 x 625 mm

7
Reison Medical AB
Eriksbergsvägen 32A
734 92 Hallstahammar
SWEDEN
[phone] [e-mail] [e-mail]