Reison 10-480 User manual

1
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2021-04-20
Document number: M10-480EN rev.01
Kidney elevator 10-480
ENGLISH

2
Intended use
Kidney elevator intended to use placed underneath the patient as a support with adjustable height
for positioning during e.g. kidney or bile surgery. The product is to be used by medical professionals
within a medical facility.
Safety regulation
Maxumum load: 75 kg, corresponding to a patient weight of 180 kg, according to EN 60601-1 and EN
60601-2.
Before use, ensure correct function!
Pay attention to the risk of pinching/crushing during height adjustment.
Service and preventive maintenance shall be performed by authorized personnel.
MAX 75 kg (MAX 180 kg )

3
User instruction
Installation
Adjust the width of the edge supports to fit the width of the operating table. Place the kidney elevator
underneath a mattress on the operating table.
Position adjustment
550 –610 mm
A.
B.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used on metal surfaces.
Wipe dry with soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check the positioning
function of the Kidney elevator.
Annual service
Once a year the Kidney elevator shall be carefully cleaned, moving parts shall be lubricated, the
positioning function shall be tested.

5
Spare parts
Description
Pcs.
Article no.
1.
Frame
1
10082
2.
Screw right threaded
1
10106
3.
Screw left threaded
1
10107
4.
Bevel gear
4
030183-A
5.
Shaft
1
10110
6.
Screw MF6S M5x10 A2
4
-
7.
Washer DB 10x16x1
4
-
8.
Cover
2
10109
9.
Screw MC6S M3x6 A2
4
-
10.
Hinge
2
10112
11.
Rail
1
10090
12.
Tubular pin FRP 4x14
2
-
13.
Stop ring 10x20x10 A2
2
-
14.
Tube left threaded
1
11143
15.
Tube right threaded
1
11144
16.
Plate
1
10084
17.
Crank
1
10102
18.
Edge support right
1
10414HÖ
19.
Edge support left
1
10414VÄ
20.
Screw MF6S M5x12 A2
22
-
21.
Washer BRB 5,3x10x1
5
-
22.
Cap nut MHM5 A2
4
-
23.
Washer BRB 6,4x12x1,5 FZB
2
-
24.
Tubular pin RPD Ø5x25 A2
2
-
25.
Tubular pin RPD Ø5x30 A2
2
-
26.
End piece
2
10113
27.
Hinge
2
10108
28.
Washer BRB 1,5x20x2 Nylon
2
-
29.
Washer BRB 8,4x16x1,5 FZB
2
-

6
Technical specification
Maximum workload
75 kg, corresponding to a patient weight of 180 kg, according to EN 60601-1
and EN 60601-2
Material Kidney elevator
Chromed steel
Stainless steel
PP plastic
Weight
7,7 kg
Dimension (H x W x L)
80-190 x 550-610 x 550 mm
UDI-DI
07350111832452

7
Reison Medical AB
Eriksbergsvägen 32A
734 92 Hallstahammar
SWEDEN
[phone] [e-mail] [e-mail]