Riso ComColor FW Series User manual

RISO FW / GD Series
Printing from USB Drives
using the PS-Kit Option
Getting Started Guide
RISO UK Ltd

This publication is intended as a quick guide to printing from a USB Drive when the optional
PS-Kit is fitted to a RISO ComColor FW or GD Series printer.
C
After selecting “Load” suitable PDF documents
or folders containing PDF’s will be displayed.
A
2
Once the USB Drive has been inserted the
“Save / Load” icons will automatically appear.
If the two icons fail to appear after inserting the USB Drive
just select the purple “USB” icon.
Select “Load”
B
Please Note:
The PS-Kit option must be installed on the RISO printer to enable you to print directly from a USB Drive.
The purple “USB” icon must be visible on the home screen display. This icon could displayed in a
different position on the home screen to that shown below.
Only PDF Files can be printed directly from a USB Drive using this method.
The panels illustrated are from the FW series, the look of the GD panel may differ slightly in design
Insert USB Drive containing the PDF files
required for printing in the USB port on the
left hand side of the operational panel.
You can change the screen view of the PDF files
and folders to a thumbnail view by selecting

To print select the PDF press to highlight
If the PDF you wish to print is in a folder highlight the
folders and select “Open” to access.
D
3
If you wish to change the print settings prior
to printing select and “Print Settings”
E
In “Print Settings” it allows the user to select or
adjust a number of settings including:
Colour Mode
Resizing
Simplex or Duplex
Paper Tray Selection
Combine / Image Repeat
Stamp
....and many others.
F
Finally select your number of copies using the
keyboard.
Press the blue “Start” button.
E

RISO UK Ltd