Riso Comcolor Series User manual

Please contact following for supplies and service:
Copyright © 2009 RISO KAGAKU CORPORATION
User'sGuide
User'sGuide
050-36300-002
This guide describes total operation features and specifications.
9050/9050R
7050/7050R/7010/7010R
3050/3050R/3010/3010R
Applicable Printer models

Options and functions vary depending on the model.
ComColor
9050
ComColor
9050R
ComColor
7050
ComColor
7050R
ComColor
7010
ComColor
7010R
ComColor
3050
ComColor
3050R
ComColor
3010
ComColor
3010R
Maximum Print Area
314 mm × 548 mm
(12 3/8" × 21 9/16")
314 mm × 548 mm
(12 3/8" × 21 9/16")
310 mm × 544 mm
(12 3/16" × 21 7/16")
210 mm × 544 mm
(8 1/4" × 21 7/16")
210 mm × 544 mm
(8 1/4" × 21 7/16")
Printable Area
(Margin)
Standard: 3 mm (1/8")
Maximum: 1 mm (1/16")
Standard: 3 mm (1/8")
Maximum: 1 mm (1/16")
Standard: 5 mm (3/16")
Maximum: 3 mm (1/8")
Standard: 5 mm (3/16")
Maximum: 3 mm (1/8")
Standard: 5 mm (3/16")
Maximum: 3 mm (1/8")
USB Port ✓*1✓*1✓*1
Multifunction Finisher
(Optional)
✓✓
N/A ✓
N/A
Feed Tray*2
✓✓
N/A ✓
N/A
✓: available
N/A: not available
*1A USB port may be provided upon user’s request. For details, please contact your service representative.
*2[Slip sheet] and [Add cover] functions require the feed tray.
CAUTION
After reading this guide, keep it in handy for future reference.
The "Safety Precautions" are provided in the supplemental
Safety Information. Be sure to read through them prior to use.
For ComColor 3050/3050R/3010/3010R
Regular size paper whose width exceeds 216 mm (8 1/2") is not displayed on the printer driver screen and the operation panel.
✓*1 ✓*1
ComColor Series User's Guide 01

1
About This Guide
Preface
Thank you for using the ComColor Series product.
This ComColor Series is an inkjet printer that is network-compatible and performs high-speed, full-color
printing.
You can use the various functions of this printer to print data and monitor printer operations from a computer.
And with the optional scanner, you can copy originals, save and use scanned data, and use various functions.
The following five guides are supplied with this machine.
●Basic Guide
This guide describes the basic printer, copy, and scanner operations and how to replace consumables.
Please start by reading this guide.
●User's Guide (this guide)
This guide describes specifications, operations and settings of each function. Please read this guide when you want to
know details about this machine.
●Administrator's Guide
This guide describes the machine settings to be performed by the administrator.
●Troubleshooting Guide
This guide describes the action to take when a paper jam or other problem occurs.
●Safety Information
This guide describes safety precautions and specifications.
About This Guide
(1) No part of this guide may be reproduced in whole or in part without the permission of RISO KAGAKU
CORPORATION.
(2) The contents of this manual may undergo changes without prior notice to reflect improvements in the product.
(3) RISO shall not be liable for any consequence of using this guide or the machine.
Trademark Credits
Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and/or other countries.
ColorTune is a registered trademark of Agfa-Gevaert N.V., is registered in the U.S. Patent and Trademark Office, and may
be registered in other jurisdictions.
Intel and Celeron are trademarks of Intel Corporation in the United States and other countries.
FeliCa is a registered trademark of Sony Corporation.
Mifare is a registered trademark of Royal Philips Electronics.
ComColor and FORCEJET are trademarks of RISO KAGAKU CORPORATION.
is a registered trademark of RISO KAGAKU CORPORATION in Japan and other countries.
All other product names and company names written in this guide are trademarks or registered trademarks of their
respective companies.
ComColor Series User's Guide 01

2
Symbols, Notations, and Screenshots Used in This Guide
■Symbols Used in This Guide
Indicates cautions that should be noted for safe use of this machine.
Indicates important items that should be noted or are prohibited.
Indicates useful information or additional information.
■Names of Keys and Buttons
The names of hard keys on the operation panel and buttons on the touch panel screen or computer window are
indicated with square brackets [ ].
■Names of Optional Equipment
The following are the names of the optional equipment used in this guide. An individual name is used for each item of
equipment when describing its unique features.
■Illustrations Used in This Guide
The screenshots contained in this guide may vary from the actual screen display depending on the usage
environment, including the connected optional equipment.
Name Used in This Guide Optional Equipment
Stacking tray Wide stacking tray
RISO auto-control stacking tray
Example: Press the [STOP] key.
Example: Press [ADF scan & pause]. Example: Select the [Mixed size]
check box.
Operation Panel Touch Panel Screen Computer Window
ComColor Series User's Guide 01

3
Contents
About This Guide .....................................................................................1
Symbols, Notations, and Screenshots Used in This Guide ..............................................2
Part Names and Functions ......................................................................7
Main Unit and Optional Scanner ........................................................................ 7
Stacking Tray (optional) ..................................................................................... 8
Finisher (optional) .............................................................................................. 9
Operation Panel ............................................................................................... 10
Touch Panel ..................................................................................................... 11
Touch Panel Operations ........................................................................13
Using the Touch Panel ..................................................................................... 13
Logging In ........................................................................................................ 13
Entering Text .................................................................................................... 15
List of Settings for Each Mode .............................................................16
Print Preparations ..................................................................................22
Turning the Power On/Off ................................................................................ 22
Loading Paper .................................................................................................. 23
Preparing the Stacking Tray (optional) ............................................................. 27
Chapter 1 Printer Driver................................................................................................1-1
Overview of Print Operations ..............................................................1-2
Printer Driver Screen .......................................................................................1-2
Procedure ........................................................................................................1-3
List of Settings .................................................................................................1-5
Basic Settings .......................................................................................1-7
[Basic] Tab ......................................................................................................1-7
[Layout] Tab ..................................................................................................1-12
[Image] Tab ...................................................................................................1-15
[Finishing] Tab ...............................................................................................1-17
[Advanced] Tab .............................................................................................1-23
[About] Tab ....................................................................................................1-27
Environment Settings .........................................................................1-28
[Environment] Tab .........................................................................................1-28
ComColor Series User's Guide 01

4
Chapter 2 Copy..............................................................................................................2-1
Overview of Copy Operations ..............................................................2-2
Procedure ........................................................................................................2-2
List of Settings .................................................................................................2-6
Basic Settings .......................................................................................2-8
Color mode ......................................................................................................2-8
Reproduction size ...........................................................................................2-9
Feed tray .........................................................................................................2-9
Original ..........................................................................................................2-12
Scanning level ...............................................................................................2-13
Duplex/Simplex .............................................................................................2-14
Direct Access/Selections entry .........................................................2-16
Direct Access entry .......................................................................................2-17
Selections entry .............................................................................................2-17
Copying Functions .............................................................................2-18
Check setting ................................................................................................2-18
Save/Call setting ...........................................................................................2-19
Select layout ..................................................................................................2-22
Copy and pause ............................................................................................2-23
Additional copies ...........................................................................................2-24
Save to folder ................................................................................................2-24
Save to archive .............................................................................................2-26
ADF scan & pause ........................................................................................2-27
Scanning size ................................................................................................2-27
Mixed size original .........................................................................................2-28
Book shadow erase .......................................................................................2-29
Multi-up .........................................................................................................2-30
Stamp Page/Date ..........................................................................................2-31
Image quality .................................................................................................2-33
Gamma control ..............................................................................................2-34
Image control ................................................................................................2-35
Base color level .............................................................................................2-35
Program ........................................................................................................2-36
Add cover ......................................................................................................2-40
Collate/slip sheet ...........................................................................................2-41
Auto-Rotate ...................................................................................................2-43
Staple/Punch .................................................................................................2-43
Paper folding .................................................................................................2-45
Booklet ..........................................................................................................2-47
Output tray ....................................................................................................2-49
Paper guide control .......................................................................................2-50
Jump wing control .........................................................................................2-51
Head cleaning ...............................................................................................2-51
Front doors release .......................................................................................2-52
Interrupt copy ................................................................................................2-52
ComColor Series User's Guide 01

5
Chapter 3 Scanner.........................................................................................................3-1
Overview of Scan Operations ..............................................................3-2
Procedure ........................................................................................................3-2
List of Settings .................................................................................................3-8
Basic Settings .......................................................................................3-9
File format .......................................................................................................3-9
Reproduction size .........................................................................................3-10
Image size .....................................................................................................3-10
Color mode ....................................................................................................3-11
Scanning level ...............................................................................................3-12
Duplex/Simplex .............................................................................................3-12
Scanning Functions ............................................................................3-13
Check setting ................................................................................................3-13
Save/Call setting ...........................................................................................3-13
Original ..........................................................................................................3-13
Book shadow erase .......................................................................................3-14
Scanning size ................................................................................................3-14
Mixed size original .........................................................................................3-14
Gamma control ..............................................................................................3-14
Image control ................................................................................................3-14
Base color level .............................................................................................3-14
PIN code .......................................................................................................3-15
Front doors release .......................................................................................3-15
Chapter 4 Printer ...........................................................................................................4-1
Overview of Printer Mode Operations .................................................4-2
Procedure ........................................................................................................4-2
List of Settings .................................................................................................4-5
Managing Jobs ......................................................................................4-6
[Active] Screen ................................................................................................4-6
[Waiting] Screen ..............................................................................................4-7
[Finished] Screen ............................................................................................4-8
[Folder] Screen ................................................................................................4-9
Changing Finished Job and Folder Job Settings ..........................................4-11
Printer Function Settings ...................................................................4-14
Online ............................................................................................................4-14
Feed tray .......................................................................................................4-14
Head cleaning ...............................................................................................4-15
Paper guide control .......................................................................................4-15
Jump wing control .........................................................................................4-15
Front doors release .......................................................................................4-15
ComColor Series User's Guide 01

6
Chapter 5 RISO Console...............................................................................................5-1
Overview of the RISO Console ............................................................5-2
Starting the RISO Console ..............................................................................5-3
[Monitoring] Menu .................................................................................5-4
[General] Screen .............................................................................................5-4
[System] Screen ..............................................................................................5-5
[User] Screen ..................................................................................................5-5
[License Info.] Screen .....................................................................................5-6
[Meter display] Menu ............................................................................5-7
[Details] Screen ...............................................................................................5-7
[Limit] Screen ..................................................................................................5-7
[Report] Screen ...............................................................................................5-8
[Printer] Menu ........................................................................................5-9
[Active] Screen ..............................................................................................5-10
[Waiting] Screen ............................................................................................5-10
[Finished] Screen ..........................................................................................5-11
[Folder] Screen ..............................................................................................5-11
[Functions] Screen ........................................................................................5-12
[Scanner] Menu ...................................................................................5-13
Chapter 6 Appendix.......................................................................................................6-1
Specifications ........................................................................................6-2
Consumables ......................................................................................6-11
Ink Cartridges ................................................................................................6-11
Index .....................................................................................................6-13
ComColor Series User's Guide 01

7
Part Names and Functions
Main Unit and Optional Scanner
<The ComColor 9050 is shown in this illustration.>
aFace Down Tray
The printouts are output face-down. When the optional
face down offset tray is installed, the machine stacks
each print job slightly shifted apart from one another.
bOperation Panel
Use to perform operations or settings.
cFront Cover
Open when paper is jammed or when replacing an ink
cartridge.
Normally (when there is no problems such as
paper jams), this cannot be opened. When you
want to open it, turn the [Front doors release] to
ON.
dStandard Tray
Load special paper (thick paper, envelopes, and so on)
here. Plain paper can also be loaded.
ePaper Feed Pressure Adjustment Lever
Use to adjust the paper feed pressure to suit the type in
the standard tray.
fStandard Tray Paper Guide
Use to prevent paper in the standard tray from becoming
misaligned.
gPaper Feed Guide Lever
Use to slide or fix the standard tray paper guide. Levers
are located on both sides of the standard tray paper
guide, in two positions.
ComColor Series User's Guide 01

8
hMain Power Switch
Use to turn the main power on and off. Usually the power is
left on.
iScanner Socket
Use to connect the scanner power cord.
jMain Unit Socket
Use to connect the main unit power cord.
kStandard Tray Descent Button
Use to move the standard tray up or down when
replacing or adding paper to it.
lFeed Tray
Set the paper to be used for printing here. Special paper
such as thick paper cannot be set.
mUSB Port
Use to connect a USB flash drive to save scanner data.
Use USB flash drive compatible with Mass
Storage Class and USB 1.1 or 2.0 specifications.
nScanner (Optional)
Use to copy or scan documents that are read from the
platen glass or the ADF.
oScanner Lamp (green/red)
Lights up in green when the scanner is ready to be used.
Flashes in green when starting up or while reading, and
flashes in red when an error occurs.
pPlaten Glass
Set the original face down and aligned with the position
of the arrow in the top left.
qOriginal Cover
Pull down to cover the original when reading it on the
platen glass.
rAutomatic Document Feeder (ADF)
Up to about 100 originals can be automatically fed.
sADF Original Unit Lever
Pull this lever up to open the original unit cover when
originals are jammed.
tADF Original Guide
Slide to fit the width of the original.
uADF Original Output Tray
Documents that are read from the ADF are output here.
vScanner Power Switch
Use to turn the scanner power on and off. Usually the
power is left on.
Stacking Tray (optional)
The RISO auto-control stacking tray and wide stacking tray are available as optional stacking trays.
Printouts are ejected face-up.
• With the RISO auto-control stacking tray, the paper guides adjust automatically to fit the paper size.
• With the wide stacking tray, move the paper guides (sides and end) to match the size of the paper for printing.
<The RISO auto-control stacking tray is shown in
this illustration.> aPaper Arranger
Set to suit the paper type so that the output paper is
neatly aligned.
bPaper Guides Open Button
Use to spread the paper guides apart. Operation varies
depending on whether paper is present or not.
•When the machine is idle and there is no paper in the
stacking tray, the guides open to the loading position.
•When the machine is idle and there is paper in the
stacking tray, the paper guides spread apart, making it
easy to remove the paper. The paper guides that
spread apart when the button is pressed vary
depending on the administrator settings.
This button is found only on the RISO auto-control
stacking tray.
cPaper Guide (end)
dPaper Guide (side)
Use to prevent output paper in the stacking tray from
becoming misaligned.
ComColor Series User's Guide 01

9
Part Names and Functions
Finisher (optional)
If you connect the optional multifunction finisher, you can staple or punch the printed paper or create a
booklet.
aTop Tray
The printouts are output here when punching is
performed.
bStacking Tray
The printouts are output here when the staple or offset
output function is used.
cEject Button
Use this button to move the printouts in the booklet tray
to the position where you can easily retrieve them.
dBooklet Tray
Booklets and 2-fold printouts are output here.
eRight Cover
Open to replace the staple cartridge or if paper is
jammed.
fLeft Cover
Open to remove the jammed paper from the paper feed
path between the printer and the finisher.
ComColor Series User's Guide 01

10
Operation Panel
Various operations and settings can be performed using the operation panel.
You can also identify the machine status or errors such as paper jamming from the lamp colors and whether
the lamps light up or flash.
aWake Up Key
Lights up when the machine is in the backlight OFF or
sleep status.
Press to make the machine ready for operation.
bMain Power Lamp
Lights up when the main power is "ON".
cSub Power Key
Use to turn the power on and off. Lights up when the
power is on. To switch to off, press and hold.
dInterrupt Lamp
Lights up during copy interrupt.
eRESET Key
Press to return the settings to their default values.
fInterrupt Key
Press to temporarily stop the copying that is in progress
and execute a different copy job.
gSTOP Key
Press to stop the job that is in progress.
hSTART Key
Press to start an operation.
iStart Lamp
Lights up when the START key is ready to be used.
jError Lamp
Flashes when an error occurs.
kClear Key
Press to clear letters or numbers that have been entered.
lData Receive Lamp
Flashes when data is being received.
mNumeric Keys
Press to enter numbers.
nTouch Panel
Use to perform operations or settings.
This panel also displays information such as error
messages and confirmation messages (p. 11 "Touch
Panel").
oCounter Key
Press to display the total number of copy or print sheets.
pFunction Keys
Use as shortcut keys for moving to the mode by
registering modes or functions. They are registered in the
administrator settings.
qMODE Key
Press to switch to the mode screen.
ComColor Series User's Guide 01

11
Part Names and Functions
Touch Panel
●Mode Screen
This is a screen to select the mode you want to
use. Press a mode button to access that mode. On
this screen, you can see the remaining amount of
ink and machine status.
You can access this screen anytime when pressing
the MODE key on the operation panel.
The buttons displayed vary depending on the
optionalequipmentconnectedandsettings details.
a[Login]
Press this button to log in.
While you are logged in, this button is labeled
[Logout], and the name of the current user is
displayed next to the button.
bPrinter Status Button
This button indicates the current machine status: Idle,
Printing, Error, or Offline.
Press the button to switch to the printer mode screen.
cFORCEJETTM Link Icon
This icon indicates whether all parts required for printing
are working correctly. The icon is grayed out if accurate
color management is not possible.
dRemaining Ink Indicator
These icons indicate how much of each ink color is left.
The icons flash when less than 10% of the capacity is
left. Prepare a new ink cartridge of the color that flashes.
eMode Buttons
Press these buttons to access screens for each mode.
Lock icons in the upper left corner of a button indicate
that you must log in to access that mode.
●The mode buttons are not displayed unless the
optional equipment has been connected.
●Buttons for modes that the current user is not
authorized to use are grayed out.
f[Status]
Press this button to check General, System, or User
information.
●Mode Screens
Pressing a mode button on the mode screen will
switch to that mode screen.
■Printer Mode Screen
Manage or check print jobs (jobs stored in shared or
personal folders on the machine, or jobs sent from a
computer).
■Copy Mode Screen (Optional)
Control copying on this screen.
ComColor Series User's Guide 01

12
■Scanner Mode Screen (Optional)
Control scanning on this screen.
■Status Screen
●General Screen
Enables you to check the status of the consumables,
such as paper or ink.
●System Screen
Enables you to check the model of the machine and
other information.
●User Screen
Enables you to check the logged in user name and
group. This screen is displayed only when a user is
logged in.
●License Info. Screen
Enables you to view information about the license of
the system in the machine.
ComColor Series User's Guide 01

13
Touch Panel Operations
You can operate the machine by using the touch panel and keys on the operation panel. To use a button on
the touch panel, touch it with your finger. That action is referred to as "press" in step-by-step instructions in
this guide.
Using the Touch Panel
■Buttons
To select a button on the touch panel, press the
button.
"■" displayed in the lower right corner of a button
indicates that pressing the button will display another
screen to complete the settings.
If "■" is not displayed, the button activates or deactivates
the function each time it is pressed. Active functions are
displayed in orange.
Buttons that are not available under the current
conditions are grayed out. You can use these
buttons when the required conditions are met.
■Confirming or Canceling Settings
When [OK] is displayed on a screen, you must
press [OK] to save the settings. If you do not press
[OK], the settings may be discarded.
To cancel the settings you have completed, press
[Cancel].
Logging In
Lock icons in the upper left corner of mode buttons
indicate that you must log in to access those
modes.
When deactivated When activated
Lock icon
ComColor Series User's Guide 01

14
●How to Log In
When using an optional IC cardreader, you can log
in by holding the IC card over the card reader.
1 Press [Login].
2 On the [Login] screen, select your
name.
To find your name, press [S] or [T] at right to
scroll through names, or press the index buttons
on the bottom of the screen to display their
corresponding names.
After you select your name, the [Password input]
screen is displayed.
3 Enter the password and press [OK].
The screen for the mode you have logged in is
displayed.
After finishing operations, be sure to press [Logout].
Ask your administrator if you cannot find your
name, or if you have forgotten the password.
●Changing Login Passwords
1 Once you are logged in, press
[Status] on the mode screen.
2 On the [User] screen, press
[Password change].
3 Enter the new password and press
[Next].
4 On the [Password change (input
again)] screen, enter the new
password again and press [OK].
ComColor Series User's Guide 01

15
Touch Panel Operations
Entering Text
When entering user names or passwords, enter the
required information on the text input screen.
1 Select the type of text to enter.
2 Press each character you want to
enter.
To move the cursor, press [ ] or [ ]. To erase
the character to the left of the cursor, press
[Clear].
The maximum number of characters to be entered
is displayed above the text input field.
3 Press [OK] when input is
complete.
To cancel information you have entered, press
[Cancel].
ComColor Series User's Guide 01

16
List of Settings for Each Mode
●Printer Driver
Setting Description See
[Basic] tab
Color mode Select color or monochrome printing. p. 1-7
Duplex print Specify simplex or duplex printing. p. 1-7
Original size Specify the paper size and orientation of the original. p. 1-8
Mixed size*1 *2Specify this when the original has multiple sizes. p. 1-8
Zoom
Specify enlargement or reduction of original images before printing, if needed. p. 1-9
Paper size Specify the size of paper for printing. p. 1-9
Input tray*1Specify the tray where paper for printing is loaded. p. 1-9
Paper type Specify the type of printing paper. p. 1-10
Output Select the output method (either [Print] or [Save to folder]) for original
data sent from a computer. p. 1-10
Destination When [Output] has been set to [Print & Save to folder] or [Save to folder],
this field indicates the directory. p. 1-10
Save/Call setting Save and call frequently used settings. p. 1-11
[Layout] tab
Imposition Specify the type of imposition. p. 1-12
Rotate Specify this when rotating the original. p. 1-14
Image position Specify this when adjusting the print position. p. 1-14
Save/Call setting Save and call frequently used settings. p. 1-14
[Image] tab
Original image
Specify whether to emphasize the image quality of photos or text in originals. p. 1-15
Line smoothing Select this to smooth the outline of text or illustrations. p. 1-15
Gamma control Adjust the lightness, chroma, contrast, and RGB gamma value. p. 1-15
Screening Specify the method of halftone processing. p. 1-16
Image quality Specify the print resolution. p. 1-16
Print density Specify the print density. p. 1-16
Save/Call setting Save and call frequently used settings. p. 1-16
[Finishing] tab
Collate Specify the collating option. p. 1-17
Slip sheet*1Specify the timing for slip sheet insertion between printouts. p. 1-17
Offset output Specify the timing to offset output. (When using the optional multifunction
finisher or face down offset tray) p. 1-18
Add cover*1Specify this to add front and/or back cover. p. 1-18
Booklet binding*1Specify the type of booklet printing. (When using the optional
multifunction finisher) p. 1-18
ComColor Series User's Guide 01

17
List of Settings for Each Mode
*1 This function is not available for ComColor 7010/7010R/3010/3010R.
*2 This function is not available for ComColor 3050/3050R.
Binding side*1Specify the position for stapling and punching. (When using the optional
multifunction finisher) p. 1-20
Staple*1Select the stapling method. (When using the optional multifunction
finisher) p. 1-21
Punch*1Select the punching method. (When using the optional multifunction
finisher) p. 1-22
Paper folding*1Select this when folding paper in two. (When using the optional
multifunction finisher) p. 1-22
Output tray Specify the output tray. (When using the optional multifunction finisher or
stacking tray) p. 1-23
Save/Call setting Save and call frequently used settings. p. 1-23
[Advanced] tab
Copies Enter the number of copies to print. p. 1-23
Print and pause To check the printing result, the machine stops after printing one set. p. 1-23
Program Specify this when distributing different numbers of copies to multiple
groups. p. 1-24
Blank Paper Cut Down Specify this to not print blank pages of the original. p. 1-24
Continuous output Select this to switch the output tray automatically when the tray is full.
(When using the optional multifunction finisher or stacking tray) p. 1-25
Watermark Specify the background watermark to be added to document pages. p. 1-25
Stamp Page/Date Stamp page number and date on the header or footer. p. 1-26
PIN code Assign a PIN code to a job to be printed or saved to a folder. p. 1-27
Save/Call setting Save and call frequently used settings. p. 1-27
Setting Description See
ComColor Series User's Guide 01

18
●Copy Mode
Setting Description See
[Basic]
Color mode Select color or monochrome printing. p. 2-8
Reproduction size Use this to reduce or enlarge the copied image. p. 2-9
Feed tray Change the feed tray, paper type, and feed control
settings according to the paper to be copied. p. 2-9
Original Select the original type to perform the appropriate
image processing and print the scanned data. p. 2-12
Scanning level Adjust the scanning density of originals. p. 2-13
Duplex/Simplex Specify the sides of the original to be read and the sides
of the paper to be printed on. p. 2-14
Direct Access entry*1Up to 4 frequently used functions can be registered to
the direct access area. p. 2-17
[Selections] Selections entry*1Up to 16 frequently used functions can be registered to
the selections screen. p. 2-17
[Functions]
Check setting Confirm the current settings and print the settings
information. p. 2-18
Save/Call setting Up to 10 frequently used settings can be registered. p. 2-19
Select layout Set various finishing settings by selecting an output
image. p. 2-22
Copy and pause To check the printing result when copying a large
number of copies, the machine stops after printing one
set.
p. 2-23
Additional copies Print one or more copies of previously copied original
data. p. 2-24
Save to folder Save scanned originals as data to the machine. You can
retrieve the data and print it when needed. p. 2-24
Save to archive Save scanned originals as data to an external controller.
You can retrieve the data and print it when needed.
(When using the optional ComColorExpress IS900C)
p. 2-26
ADF scan & pause Copy all originals together, even when copying a large
quantity of originals that cannot be loaded at one timein
the ADF.
p. 2-27
Scanning size Specify the scanning size of the original. p. 2-27
Mixed size original*2 *3Specify this option when the original has multiple sizes. p. 2-28
Book shadow erase Remove shadows that appear in the center of copies
when an open book is copied. p. 2-29
Multi-up Specify Multi-up (Plural) (arranges continuous pages on
one sheet) and Multi-up (Single) (arranges multiple
copies of one page on one sheet) copying.
p. 2-30
Stamp Page/Date Stamp the page number and date on the header or
footer. p. 2-31
Image quality Specify the resolution for scanning originals. p. 2-33
Gamma control Adjust the color balance (CMYK) of scanned data. p. 2-34
Image control Specify the image processing of the original. p. 2-35
ComColor Series User's Guide 01