RiverRidge 06-035 White User manual

ASSEMBLY INSTRUCTIONS
LADDER SHELF
ITEM#:06-035 White
ITEM#:06-036 Espresso
ADULT ASSEMBLY REQUIRED
Caution:This Ladder Shelf requires assembly by an adult because of small
parts, care should be taken in unpacking and assembly of this item
SEND REQUESTS FOR MISSING OR DAMAGED PARTS REPLACEMENTS BY EMAIL TO :
[e-mail]

Young children can be killed when furniture tips over.
Do not use as a TV stand.
Use angle-braces or anchors to secure furniture to wall.
THIS SHELF UNIT WILL HOLD TO 12 POUNDS PER SHELF FOR A TOTAL OF 36 POUNDS. DO NOT LOAD
EACH SHELF WITH MORE THAN 12 POUNDS. IF LOADED WITH MORE THAN 12 POUNDS PER SHELF AS
THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.

PARTS LIST
1 1PC TOP SHELF
2 1PC SECOND SHELF
3 1PC THIRD SHELF
4 1PC LEFT UPPER SIDE PANEL
5 1PC LEFT LOWER SIDE PANEL
6 1PC RIGHT UPPER SIDE PANEL
7 1PC RIGHT LOWER SIDE PANEL
8 2PCS CROSS BAR
A 4PCS METAL CONNECTION BAR
B 12PCS MACHINE SCREW
C 4PCS LONG SCREW
D 8PCS SMALL SCREW
E 2PCS SCREW FOR ANCHOR
F 2PCS PLASTIC ANCHOR

STEP 1
STEP-1:
1. Insert 2pc Metal Connection Bar (A) into the holes on the end of Left upper side panel (4), make sure
the hole on the Metal Connection Bar (A) is towards the hole on the Left upper side panel (4).
2. Screw 2 Machine screws (D) through the holes on the Left upper side panel (4) and tighten to the Metal
Connection Bar (A).
3. Attach Lower side panel (5) to Left upper side panel (4) by inserting the Metal Connection Bar (A) into
the holes on end of Left lower side panel (5), make sure the hole on the Metal Connection Bar (A) is
towards the hole on the Left lower side panel (5).
4. Screw 2 Machine screws (D) through the holes on the Left lower side panel (5) and tighten to Metal
Connection Bar (A).
5. Repeat above steps to assemble another Right upper side panel (6) and Right lower side panel (7).
STEP 2
STEP-2:
1. Attach 2pc Wooden Cross Bar (8) to Pre-Assembled left side panel(4,5) by inserting 2pc Long screw (C)
through the holes on the Left side panel then tighten to Wooden Cross bar (8).
2. Attach Top Shelf (1) to Left side panel by inserting 2pc Machine screw (B) through the holes on the Top
Shelf (1) then tighten to the Left side panel.
3. Repeat above point#2 to assemble other 2 shelves (2),(3).

STEP 3
STEP-3:
1. Attach 2pc Wooden Cross Bar (8) to Pre-Assembled Right side panel (6,7) by inserting 2pc Long screw (C)
through the holes on the Right side panel then tighten to Wooden Cross bar (8).
2. Attach Top Shelf (1) to Right side panel by inserting 2pc Machine screw (B) through the holes on the Top
Shelf (1) then tighten to the Right side panel.
3. Repeat above point#2 to assemble other 2 shelves (2),(3).
STEP 4
STEP-4:
1. Drill 2 hole on the wall according to the hole’s distance on Top Shelf (1).
2. Insert 2pc Plastic Anchor (F) into the 2 holes on the wall.
3. Insert 2 Screw (E) through the holes on the Top Shelf (1) then tighten to 2 Plastic Anchor (F) with a Philip
Screwdriver.

YOU CAN ENJOY YOUR LADDER SHELF NOW !
Attention Adults: The Ladder shelf should be checked periodically
for damaged or loose screws/parts. Shake appropriate action
necessary to correct the hazard such as tightening of screws and
taking any damaged parts away from the children.
Thank you for purchasing these RiverRidge® Home items. We
hope you enjoy them.
You can contact us at [e-mail] with any
questions or comments.
RiverRidge® is a registered trademark of Sourcing Solutions ,Inc. Hudson,WI 54016