Rollplay W348AC Assembly instructions

Owner’s Manual and Assembly Instructions
Model #: W348AC
Read and understand the entire manual before assembly and operation. The vehicle must be
assembled by an adult who has read and understands the instructions.
Made in China.
Styles and colours may vary. Do not return to store. Call 1-888-982-9309 for assistance and
replacement parts.
IMPORTANT:
Save this manual with your sales receipt.
6V BMW Motorcycle

Introduction
Thank you for purchasing this RollPlay vehicle from Aria Child. We hope
the rider enjoys it for miles to come. Please read this instruction guide
carefully before assembling and operating the vehicle. Please have your
model number and serial number ready before calling. Please have proof of
purchase. Keep your sales receipt or register your product at
www.rollplay.net.
Please contact Aria Child Customer Service with any questions.
Hours: 9 AM - 5 PM (CST), Monday - Friday
Phone: [phone]
Email: [email protected]
Web: www.rollplay.net
Specifications:
BATTERY 6V 7AH
MOTOR 6V 20W
AGE 3 Years and Up
MAX WEIGHT 35 KG (77 lbs)
PRODUCT SIZE 101.5 x 57.5 x 68.5 cm ()
SPEED 4.0 km/h (2.5 MPH)
RECHARGE TIME 8-12 Hours
TYPICAL RUN TIME 1-2 Hours
CHARGER OUTPUT DC 7.0V

IMPORTANT!
YOU MUST CHARGE THE BATTERY
FOR 24 HOURS BEFORE FIRST USE!
Charge the battery after each use.
Charge the battery at least once a month, even if the vehicle is not in use.
DO NOT RETURN THIS ITEM
TO THE STORE!
Call Customer Service if you need assistance or replacement parts. Please
have your model number and serial number ready before calling. Please
have proof of purchase. Keep your sales receipt or register your product at
www.rollplay.net as we may require proof of purchase.
1-888-982-9309
Read this entire manual to ensure
proper assembly and safe operation
of the vehicle.

This page is intentionally left blank.

5
Table of Contents
Safety..........................................................6
Parts ..........................................................8
Charging Instructions ...............................9
Assemble the Front Wheel......................10
Assemble the Rear Fork .........................11
Assemble the Rear Wheel.......................12
Assemble the Support Wheels ...............13
Attach the Mud Guard.............................14
Attach the License Plate.........................15
Assemble the Handle Bars .....................16
Assemble the Windshield .......................17
Assemble the Baggage Rack .................18
Attach the Exhaust Pipe .........................19
User Information......................................20
Maintenance ............................................21
General Care ............................................22
Troubleshooting Guide............................23
FCC Information ......................................25
Service and Repairs ...............................26
Warranty ...................................................27
Product Registration ...............................28

6Safety
WARNING: SAFETY RIDING RULES
The user must follow all safety rules and guidelines, or serious injury or death may
occur to the user.
rAlways use common sense and safe practices when using the vehicle. The user
must be at least 3 years old and weigh no more than 35 kg (77 lbs).
rThis product contains small parts that are for adult assembly only. Keep small
children away when assembling. Remove and dispose of all protective material
and plastic bags before assembly.
r
Product Safety Commission (CPSC) Standard 16 CFR 1203.
rOnly sit on the seat in the vehicle.
rDo not allow more than one rider.
rDo not overload the vehicle. Do not remove the weight restriction decals.
rDo not pull the vehicle with another vehicle or similar device.
rKeep body parts such as hands, legs, hair and clothing away from moving parts.
Moving parts can cause serious injury.
rAlways wear shoes in the vehicle.
rDo not operate near streets or motor vehicles.
rDo not operate near drop-offs such as steps, steep inclines or hills. Operate on
relatively level ground.
r
rDo not operate in dangerous weather conditions such as rain or snow.
r
r
rAlways use the vehicle in a safe, secure environment with adult supervision.
rAdult assembly required.
PREVENT INJURIES AND DEATHS:
NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view when child is in
vehicle. Direct adult supervision is REQUIRED.
NEVER use in roadways, near cars, on or near steep inclines or steps, swimming
pools or other bodies of water.
ALWAYS wear shoes
ALWAYS sit on the seat
RISK OF FIRE. Do not bypass.

7
Safety (Continued)
WARNING: BATTERY SAFETY
• Battery posts, terminals and related accessories contain lead and lead compound
(asic) chemicals known to the state of California to cause cancer, reproductive
harm, and are toxic and corrosive. DO NOT open the battery.
• Contact exposure to battery leakage (lead acid) may cause serious injury.
Immediately contact your doctor if exposure occurs. If the chemical is on the skin,
ush immediately with cool water for 15 minutes. If the chemical is swallowed,
immediately give the person water or milk. Do not give water or milk if the person
is vomiting or has decreased alertness. Do not induce vomiting.
• Tampering with or modifying the electric circuit system may cause shock, re or
explosion. It could permanently damage the system. Keep the charger housing
closed to prevent exposed wiring, which may cause electric shock.
IMPORTANT: Before using the vehicle for the rst time, the battery must be
charged for a full 24 hours (no more than 30 hours).
WARNING: ADULT SUPERVISION
REQUIRED
• Before using the vehicle, the rider must understand the vehicle controls and safety
issues.
• It is the responsibility of the adult to educate the child and to determine if the child
is capable of understanding the vehicle controls.
• An adult must ALWAYS directly supervise the use of this vehicle.
• NEVER leave a child unsupervised in the vehicle.

8Parts
1. Manual
2. License Plate
3. Baggage Rack
4. Rear Mud Guard
5. Rear Wing Bracket
6. Seat
7. Left Support Wheel
8. Rear Shield
9. Handlebar
10. Windshield Assembly
11. Front Bracket
12. Motorcycle Body
13. Left Brake
rPhillips screwdriver
Not Included:
14. Front Wheel
15. Right Brake
16. Front Axle
17. Washers (5)
18. Wrench
19. Hexagon Nut (4)
20. Battery
21. Exhaust Pipe
22. Self Tapping Screw (6)
23. Rear Wheel
24. Square Nut
25. Charger
26. Steering Wheel Screw
27. Right Support Wheel
28. Inner Wheel Spacer
29. Rear Axle Cover
30. Rear Axle
31. Gear Box
1
2
4
3
5
7
8
24
22
9
6
10
11
12
13
15
14
21
27
23
31
29
26
25 18
20
16
17
19
28
30
17

9
Charging Instructions
ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER.
To Charge the Battery:
1. Ensure the vehicle is stopped and
turned off.
2. Unlock and remove the seat.
3. Unplug the red battery connector
from the red engine connector.
4. Connect the red battery connector
to the red battery charger
connector.
5. Plug into a 120 V outlet.
To Unplug the Battery:
6. Unplug the battery charger from
the outlet.
7. Unplug the red battery connector.
8. Reconnect the red battery
connector to the red engine
connector.
9. Replace the seat and tighten lock.
Note: It is not necessary to remove
the battery for charging. However,
if the battery does not reach the
outlet, it can be removed for charging
by disconnecting the red engine
connector from the red battery
connector, loosening the screw on the
left side of the battery bar, removing
the battery bar, and then removing the
battery.
YOU MUST CHARGE THE BATTERY FOR 24 HOURS
BEFORE THE FIRST USE!

10 Assemble the Front Wheel
1. Place the left (13) and right brake (15) onto either sides of the front wheel (14).
2. Slide the front wheel assembly into the front fork.
3. Align the holes on the brakes with the holes on the front fork. Insert a self tapping
screw (22) into both holes on the fork to secure the wheel.
4. Insert the front axle (16) through the front fork and front wheel assembly.
5. Slide one washer (17) on both sides of the front axle.
6. Secure the washers with a hexagon nut (19) on both sides of the axle. Use a
wrench (18) to tighten.
15
13
14
16
17
17
19
19
22
22

11
Assemble the Rear Fork
1. Align the slot on the rear wing bracket (5) with the inner side of the rear fork
2. Insert a self tapping screw (22) through the wing bracket and rear fork to
secure
22
5

12 Assemble the Rear Wheel
1. Insert the rear axle (30) into the left hole of the rear fork. Do not slide all the way
through.
2. Slide the gear box (31) onto the rear axle. Connect the white connector on the
gear box with the white engine connector.
3. Slide the protruding side of the rear wheel (23) onto the axle. Ensure it is fully
engaged with the gear box.
4. Slide the washer (17) and inner wheel spacer (28) onto the axle, and then slide the
axle through the rest of the rear fork.

13
Assemble the Support Wheels
1. Slide the left support wheel (7) onto the left side of the rear axle.
2. Slide the right support wheel (27) onto the right side of the rear axle.
3. Slide the rear shield (8) onto the left side of the rear axle. Align the slots on the
rear shield with the protrusions on the left fork and snap into place. Ensure the
silver cylinder on the gearbox ts into the bottom hole of the rear shield.
4. Insert a screw (22) into the screwhole on the rear shield and tighten with a
screwdriver.
5. Slide a washer (17) and hexagon nut (19) on both sides of the rear axle. Tighten
both sides with a wrench (18).
17
19
17
19
22
17
19

14 Attach the Mud Guard
1. Align the slot on the back of the mud guard (4) with the back of the rear
wing bracket (5).
2. Snap the mud guard onto the rear wing bracket.
4
5

15
Attach the License Plate
1. Align the top of the license plate (2) with the slot on the bottom of the
back of the motorcycle body.
2. Slide the license plate onto the slot until it snaps into place.
2

16 Assemble the Handle Bars
1. Remove the screw (26) and nut (24) from the steering axle.
2. Slide the handle bars (9) onto the steering axle. Ensure the holes on the
handle bars align with the holes on the steering axle.
3. Insert the screw and nut into the handle bar assembly and tighten with a
screwdriver.
4. Carefully slide the handle bar wire connector into the wire compartment
where the motorcycle wire connector is located.
26
24

17
Assemble the Windshield
1. Connect the handle bar wire connector to the motorcycle body wire
connector.
2. Align the windshield assembly (10) with the slots on the wire
compartment and snap into place taking care not to damage the wires
in the process.
1. Align the front bracket (11) with the four slots on the sides of the
windshield (10).
2. Snap the bracket into place.
10
1110

18 Assemble the Baggage Rack
1. Using a athead screw driver, turn the seat lock to the unlock position.
2. Remove the seat (6) by lifting on the back of the seat.
1. Align the front bar of the baggage rack (3) with the gap on the rear of
the battery compartment and snap into place.
2. Insert a self-tapping screw (22) into the hole on the back of the baggage
rack to secure.
3. Ensure the red connector on the battery is connected to the red engine
connector before replacing and locking the seat.
6
3
22

19
Attach the Exhaust Pipe
1. Align the top and front of the exhaust pipe (21) with the slots on the
right side of the motorcycle body and snap into place.
2. Use a self-tapping screw (22) to secure.
21
22

20 User Information
1. Battery: Charge the battery a full 24 hours before rst use. Charge the
battery for 8-12 hours each additional recharge.
2. ON: Press the power button on the front of the motorcycle dashboard to
turn ON the motorcycle. The motorcycle will make a revving noise when
it is turned ON
3. OFF: Press the power button again to turn OFF the motorcycle
4. Sounds: Press the red button on the right handlebar to hear a horn
sound
5. Forward: Twist the right handlebar to move forward
6. Lights: The headlight will turn on when the motorcycle is in motion
ON/OFF Button
Sound Button
Turn Accelerator
to Move Forward