Ronbow Signature series Assembly instructions

INSTALLATION AND CARE GUIDE
31" FREE WALL CABINET WITH HIDDEN DRAWER
E027011

161102ronbow.eu | ronbow.comINSTALLATION SHEET
1
Model :
FREE 15" Wall Cabinet with Hidden Drawer
Designed By: DANELONMERONI | UK
E027011
Tools Required
PRE-INSTALLATION
Materials Included
1 set of wall brackets
6 long bolts
10 short screws
6 bolt caps
Materials Required
1 2x4 beam cut to size

161102ronbow.eu | ronbow.comINSTALLATION SHEET
2
Model :
FREE 15" Wall Cabinet with Hidden Drawer
Designed By: DANELONMERONI | UK
E027011
Figure 1.
Step 2:
Step 4:
Step 3:
Step 5:
Measure the distance for the
wall bracket.
Fasten the wall brackets to the wall.
Slide the cabinet onto the
wall brackets.
Verify the cabinet is level.
Secure the wall bracket to the cabinet
using the short screws provided.
Remove the drawer from the cabinet.
Refer to page 3.
Re-install the drawer from
the cabinet.
Refer to page 3.
Determine the ideal location of your
new cabinet.
NOTE: It is highly recommended the
location has at least two studs. Front
notch the studs and install a 2x4
horizontal beam for added stability.
See Figure 1.
See Figure 2.
Step 1:
INSTALLATION
Figure 2.
14-1/4" (36.2cm)

161102ronbow.eu | ronbow.comINSTALLATION SHEET
3
Model :
FREE 15" Wall Cabinet with Hidden Drawer
Designed By: DANELONMERONI | UK
E027011
Figure 3.
Step 2: Slide and lift up the drawer box.
Pull the release latches located
underneath the drawer.
Slide drawer box in until secured by rail
hook.
See Figure 4.
See Figure 3.
See Figure 5.
Step 1:
Step 1:
REMOVE DRAWER
REINSTALL DRAWER
Figure 4.
Figure 5.
Hook
https://youtu.be/4DdK3cj3sTU

161102ronbow.eu | ronbow.comINSTALLATION SHEET
4
Model :
FREE 15" Wall Cabinet with Hidden Drawer
Designed By: DANELONMERONI | UK
E027011
Wood Surfaces
Recommended Products
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
PRODUCT CARE AND MAINTENANCE
• If a spill occurs, clean and dry the surface immediately as liquid can soak through the surface and cause
greater damage.
• Do not place in direct sunlight. Exposure to sunlight may affect the appearance of your vanity, and the
finish will eventually crack.
• Keep away from direct sources of extreme temperatures as heat, cold or moisture from humidity.
Color changes, or blemishes in the wood can occur if recommended care of is not met. Try to avoid
these extremes.
• Most wood surfaces can be cleaned, or dusted, with any commercial wood cleaning product. For general
cleaning, use a non-abrasive, or lint-free cloth while dusting along the wood grain to preserve the
wood’s chacteristics.
• Pledge Orange Oil, or similar
• Orange-Glo Wood Cleaner
DISCLAIMERS: Wood naturally ages, darkens and changes color over time due to several environmental conditions that may cause materials to vary from their
original color and/or to warp, split or crack. These variations are considered to be the nature of the material in relation to their environmental exposure and may
be significant over a long period of time. The eectiveness of cleaning Ronbow product is dependant on various factors that include sunlight, smoke, moisture,
household cleaners and/or amount of cleaning product used over time. Ronbow cannot guarantee that the above Product Care & Maintenance methods will
eectively clean your product.
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at [phone].

161102
40650 Encyclopedia Circle
Fremont, CA 94538
T 510.713.1188
F 510.657.9388 ronbow.eu | ronbow.com