Ropox Medi2 50-50676 User manual

Ropox Nursing Table Medi 2
User Manual
Mounting Instructions
Keep this manual with the product at all times
TF 200.01.0052_eng / Date 28-09-2022

2
TF 200.01.0052_eng
Table of Contents
1. Symbols used in this manual............................................................................................................... 3
2. General safety........................................................................................................................................ 3
2.1 Product Unit label..................................................................................................................................... 5
3. General requirements ........................................................................................................................... 6
3.1 Product information.................................................................................................................................. 6
3.2 Product description .................................................................................................................................. 6
3.3 Intended use ............................................................................................................................................ 6
3.4 Intended operator..................................................................................................................................... 7
3.5 Essential performance ............................................................................................................................. 7
3.6 Nonclinical functions ................................................................................................................................ 7
3.7 Clinical functions...................................................................................................................................... 7
3.8 Product dimensions.................................................................................................................................. 7
3.9 Operation ................................................................................................................................................. 9
4. Mounting instruction........................................................................................................................... 10
4.1 Installation interfaces ............................................................................................................................. 10
4.1.1 Positioning of water supply, drain and power............................................................................... 10
4.2 List of components................................................................................................................................. 11
4.3 Installation of product............................................................................................................................. 11
4.3.1 Dimensions................................................................................................................................... 12
4.3.2 Mounting instructions ................................................................................................................... 12
4.4 Wire diagram.......................................................................................................................................... 19
4.5 Residual risks......................................................................................................................................... 20
5. Performance test ................................................................................................................................. 21
6. Safety instructions .............................................................................................................................. 21
7. Troubleshooting .................................................................................................................................. 22
8. Service and maintenance ................................................................................................................... 22
8.1 Cleaning, frame...................................................................................................................................... 22
8.2 Cleaning, tabletop.................................................................................................................................. 22
8.3 Maintenance........................................................................................................................................... 23
8.4 Service schedule, operation, and maintenance..................................................................................... 24
9. Spare parts........................................................................................................................................... 25
10. Accessories ......................................................................................................................................... 25
11. Environmental protection................................................................................................................... 27
12. Electromagnetic compatibility ........................................................................................................... 28
12.1 Suitable Environments......................................................................................................................... 28
12.2 Adjacent and stacked use.................................................................................................................... 28
12.3 Cables.................................................................................................................................................. 28
12.4 RF portable equipment ........................................................................................................................ 28
13. Complaints........................................................................................................................................... 28

3
TF 200.01.0052_eng
1. Symbols used in this manual
Warning Symbol
Indication of potentially hazardous situation. If not avoided, it can result in serious injury or
death.
Caution Symbol
Indication of potentially hazardous situation which may result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Notification Symbol
This symbol is used to notify correct use and handling of the product.
2. General safety
This manual must be read and understood before use.
Always keep this manual in close proximity of the product.
The use, installation and service of this product must be in
compliance with this manual to avoid accidents and serious
personal injury.
Never use or handle this product in other ways specified in
this manual as it can result in personal safety hazards and/or
cause damage to the product.
Persons installing and/or using this product either as operator
or user should have the necessary safety information and
access to this manual.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
designated persons in order to avoid a hazard.

4
TF 200.01.0052_eng
Do not perform repairs, disassembly or assembly operations,
add-ons, re-adjustments or modification of the product
beyond what is described in this manual. These must be
carried out by Ropox or Ropox authorized personnel. Do not
perform service while in use.
Children may not play with or on this application.
Cleaning and user maintenance shall not be done by
children.
Do not use the product if it has defects or have become
damaged before being repaired or replaced.
If the control box makes unusual noise or smells, switch off
the mains voltage immediately.
Take care that the cables are not damaged.
The products must only be used in an environment that
corresponds to their IP protection.
The information in this manual is based on correct installation
in accordance with installation instructions for this product.
Ropox cannot be held liable if the product is used in any way
that differs from stated in this manual and/or installation
instruction.
Ropox reserve the right to amend this manual and reference
documents without prior notice.

5
TF 200.01.0052_eng
2.1 Product Unit label
This product is UKCA-marked in accordance with:
UK SI 2008 No. 1597 - The Supply of Machinery (Safety) Regulations 2008, and its
amendments
This product is CE-marked in accordance with:
Council Directive 2006/42/EC on machinery
Manufacturer name and address
Date of production
Stock number
Serial number
Operating interval of electrically operated equipment. The use of electrical height
adjustable equipment can run at maximum 2 minutes, followed by an 18-minute
break.
Type B applied part
Consult manual for important safety related information, warnings, and safety
precautions.
Class II, double isolated electrical components.
Do not dispose as unsorted municipal waste. Product must be returned to a
designated recycling station.
Operating and storing temperatures may not exceed 5-40C°

6
TF 200.01.0052_eng
3. General requirements
3.1 Product information
Manufacturer
Ropox A/S
Ringstedgade 221, DK-4700 Naestved
[phone]
Email: [email protected]
Product models
Part number
Model
Configuration
50-50676
50-50678
Nursing Table Medi2
Nursing Table Medi2
130 cm
90 cm
Expected service life
5 years
Applied part
classification
Type B applied part
Height adjustment
60 –100 cm
Maximum user weight
75kg / 165lbs
Power supply
230V~, 50/60Hz
I in
Max 1.5A
Intermittence
2min use / 18min pause
IP rating
IPX4
Ambient temperature
range
+5 °C to +40 °C Transport and storage
+5 °C to +40 °C Operation
Relative humidity
20% to 80% - non-condensing
Intended environments
This product is to be used only in:
Private homes
Daycare centers or the like
Materials in contact
with user
Tabletop
Frame
Mixer tap
ABS/PMMA
Welded steel tube St. 37, stainless and aluminum
Brass
Accessories
50-50680
50-50681
50-50689
50-50682
50-50683
50-50688
50-50699
50-14684
50-50694
50-50702
50-50690
50-50687
50-50697
50-50696
Mattress for nursing table, 90cm
Mattress for nursing table, 130cm
Adapter frame for nursing table Medi 2 –20cm from wall
Side covering, white laminate –82x105cm
Side covering, white laminate –61x105cm
Side bed guard for nursing table 130cm
Side bed guard for nursing table 90cm
Mixer tap –Touchless
Mixer tap –with extension shower head
2-step ladder
Hand control with spiral cable
Support legs for Medi2
Basket unit without washbasin
Basket unit with washbasins
3.2 Product description
Ropox Nursing Table Medi2 is a height adjustable nursing table, which makes it easier for a carer to change
a child’s diaper or clothes, in a comfortable height.
3.3 Intended use
Ropox Nursing Table Medi2 is a height adjustable nursing table, which is designed specifically for users,
who must change diapers or clothes on children multiple times a day. The height adjustment is electrical,
which makes the nursing table less taxing to adjust in height. Being electrically adjustable, the table can be
used to lift children to the desired height, rather than having to lift up the child yourself.

7
TF 200.01.0052_eng
3.4 Intended operator
Reading and understanding this manual will be sufficient training for an intended operator. Children are
excluded in this definition.
3.5 Essential performance
The product does not have essential performance, as the patient and user do not experience any risk in case
of loss of product function/performance.
3.6 Nonclinical functions
Height adjusting offers better ergonomics to the user.
3.7 Clinical functions
The product does not have any clinical functions.
3.8 Product dimensions
50-50676 (130cm)
Note! All dimensions in mm

8
TF 200.01.0052_eng
50-50678 (90cm)
Note! All dimensions in mm

9
TF 200.01.0052_eng
3.9 Operation
Press the up symbol to raise the product, and the down symbol to lower it. Actuation stops as soon as the
button is released.
Fixed control switch (Standard)
Hand control with spiral cable (option)
Warning!
The product should always be able to travel the full range of actuation without colliding with
objects. Failing to do so will compromise the product stability and introduce risk of squeezing
body parts.
Special care should be taken in ensuring that no children or adults are sited under the
product as severe injury from entrapment may occur.

10
TF 200.01.0052_eng
4. Mounting instruction
4.1 Installation interfaces
Construction
The wall must be made of material suitable for screwing.
Load tested in accordance with the machinery directive. Max user weight is 75kg / 165lbs.
Max. load of upper screws: 20kg/44lbs / screw.
Power
Recommended positioning of power supply point in wall can be seen below.
Water
The drain is Ø40. The product comes with an Ø40/Ø32 drain reducer that can be used if necessary.
We recommend positioning of water and drain installations as illustrated. All hoses for water and drain
installations must be flexible to ensure unhindered movement within the height adjustment range of 60 –100
cm.
4.1.1 Positioning of water supply, drain and power
50-50676
50-50678

11
TF 200.01.0052_eng
4.2 List of components
Ropox Nursing Table Medi 2
50*50670-279 Lifting unit 1 pc.
Incl.
50*50670-247 Upper cover for lifting unit 1 pc.
50*50670-254 Tabletop unit for 50-50676 1 pc.
or
50*50670-258 Tabletop unit for 50-50678 1 pc.
Incl.
97001160 Flexible drain hose Ø40/40, 40-110cm 1 pc.
Other Screws and rawlplugs
4.3 Installation of product
Warning!
Before use always make sure that mains cable and hand control cable will be able to travel
freely without the risk of squeezing or disconnecting the product as result of the movement.
Caution!
When connected to the mains, the product must be placed in a manner according to power
outlets, so that the operator will be able to disconnect the product during use in case of an
emergency.
Prior to assembly check that all parts have been provided according to the list of components.
Installation must be done by qualified personnel

12
TF 200.01.0052_eng
4.3.1 Dimensions
4.3.2 Mounting instructions
The holes for fastening can be marked up on the wall, four possibilities in the top, and two in the bottom of
the frame. Place the frame against the wall and make sure it is horizontal. Remove the frame and drill the
holes.
The nursing table is supplied together with a set (8 pcs.) of screws and rawlplugs, which is used to mount the
unit in a concrete wall. The installer must always examine the material, condition and strength of the wall and
use appropriate screws and rawlplugs.
Caution!
Ensure no dust or other obstacles are interfering with the rollers, chain, sprocket, or gas
springs. This can cause malfunction, and damage the system.
Belt
Power
Actuator
Control box

13
TF 200.01.0052_eng
1. Start by removing the outer cover from the lifting unit. Then, when it has been determined where the
unit should be mounted in the room, the unit is mounted on the wall. Make sure the unit is level. Also
keep in mind where the power will be placed.
If the support legs have been
purchased, they must be mounted
before the lifting unit is mounted on
the wall. See separate manual!

14
TF 200.01.0052_eng
2. Re-mount the outer cover.

15
TF 200.01.0052_eng
3. The tabletop unit can now be mounted on the lifting unit. The tabletop unit comes pre-assembled.
Caution!
When the tabletop has been mounted, measure between the tabletop and the wall. There
must be 4mm of distance at most. If it is more than 4mm, there’s a risk of
entrapment/squeezing. Adjust the tabletop by pulling up on it, it’s mounted with Velcro. When
the top is free, position it such, that after re-attaching it, there is 4mm of distance or less!

16
TF 200.01.0052_eng
4. Connect the safety stop cable as shown.
5. The water and drain can now be mounted. Drain hoses and water hoses come with the version with
a sink.

17
TF 200.01.0052_eng

18
TF 200.01.0052_eng
6. The nursing table is now installed. If the tabletop unit is still not level, it’s possible to adjust it. This is
done by tightening/loosening the screws in the sides.
Or

19
TF 200.01.0052_eng
4.4 Wire diagram
The nursing table is supplied with the control box already mounted on the frame. The wire diagram shows
how the cables are connected.
Every plug is waterproof; hence they might be difficult to plug into or dismount from. Make sure the cable is
turned in the correct direction before plugging it into the control box. The cable must be pressed into the
plug, until the O-ring is no longer visible.
The motor cable is connected to input 1 in the control box. Input 2, 3 and 4 is unused, and is mounted with
sealing plugs. The hand control is connected to input “HB”. The mains cable is connected to the side of the
control box.
4
1
3
5
2
1. Control box
2. Mains cable input, 230V
3. Motor, input 1
4. Hand control
5. Safety stop cable

20
TF 200.01.0052_eng
4.5 Residual risks
Warning!
Never place your hands,
fingers or feet between the
tabletop and the wall or
lifting unit. Adults must
ensure that children on the
nursing table keep away
from these, while the table
is being actuated!
Warning!
Be aware of loose cables
and hoses! Do not let
children play near these, as
they constitute a
strangulation hazard, if the
cable is twisted around the
neck!
Warning!
In case of incorrect
mounting of plumbing parts,
a slipping hazard may
occur, as water will spill on
the floor, increasing the risk
of falling.