Ruijie Reyee RG-EW1200 User manual

Ruijie RG-EW1200 Router Web-Based Configuration
Guide

Copyright Statement
Ruijie Networks©2020
Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,
transmission, translation or commercial use of this document or any portion of this document, in any form or by anymeans,
without the prior written consent of Ruijie Networks is prohibited.
Exemption Statement
This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain
the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will
not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

1
Preface
Thank you for using our products.
Audience
This manual is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Obtaining Technical
Assistance
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [e-mail]
Skype: [e-mail]
Related Documents
Documents
Description
Command Reference
Describes the related configuration commands, including command modes,
parameter descriptions, usage guides, and related examples.
Hardware Installation and Reference
Guide
Describes the functional and physical features and provides the device
installation steps, hardware troubleshooting, module technical specifications,
and specifications and usage guidelines for cables and connectors.
Conventions

2
This manual uses the following conventions:
Convention
Description
boldface font
Commands, command options, and keywords are in boldface.
italic font
Arguments for which you supply values are in italics.
[ ]
Elements in square brackets are optional.
{ x | y | z }
Alternative keywords are grouped in braces and separated by vertical bars.
[ x | y | z ]
Optional alternative keywords are grouped in brackets and separated by
vertical bars.

Configuration Guide Overview
1
1 Overview
eWeb is a Web-based network management system that manages or configures devices. You can access eWeb via
browsers such as Google Chrome.
Web-based management involves a Web server and a Web client. The Web server is integrated in a device, and is used to
receive and process requests from the client, and return processing results to the client. The Web client usually refers to a
browser, such as Google Chrome IE, or Firefox.
1.1 Conventions
In this document, texts in bold are names of buttons (for example, OK) or other graphical user interface (GUI) elements (for
example, ARP List).

Configuration Guide Configuration Guide
1
2 Configuration Guide
2.1 Preparation
Scenario
As shown in the figure below, an administrator can access the device from a browser and configure the device through the
eWeb management system.
Figure 2-1-1 Data Exchange Principle
Deliver or request
commands
through AJAX.
Administrator Return data
Web
service
Device
Remarks
The eWeb management system combines various device commands and then delivers them to the device
through AJAX requests. The device then returns data based on the commands. AWeb service is available on the
device to process basic HTTP protocol requests.
Deployment
Configuration Environment Requirements
Client requirements:
An administrator can log into the eWeb management system from a Web browser to manage devices. The client refers
to a PC or some other mobile endpoints such as laptops or tablets.
Google Chrome, Firefox, IE10.0 and later versions, and some Chromium-based browsers (such as 360 Extreme
Explorer) are supported. Exceptions such as garble or format error may occur if an unsupported browser is used.
1024 x 768 or a higher resolution is recommended. If other resolutions are used, the page fonts and formats may not be
aligned and the GUI is less artistic, or other exceptions may occur.
The client IP address is set in the same LAN network as the device IP address, such as 192.168.110.X. The subnet
mask is 255.255.255.0. The default gateway is device management address 192.168.110.1. Alternatively, you can set
the IP assignment mode to Obtain an IP address automatically or enter ruiyi.cn into the address bar of the browser
to access eWeb.
Server requirements:
The device is enabled with Web service (enabled by default).

Configuration Guide Configuration Guide
2
The device is configured with a management IP address (Default: 192.168.110.1).
To log into the eWeb management system, open the Google Chrome browser, and enter http://ruiyi.cn into the address bar,
and press Enter.
Figure 2-1-2 Login Page
Enter the password and click Login.
2.2 Wizard
You will enter the Wizard page without login at initial setup.
2.2.1 Network Status
The page displays device count, client count, network status and the time it takes to go to Baidu.
Figure 2-2-1 Network Status

Configuration Guide Configuration Guide
3
Network Status
If the device fails to access the network, click Start Setup, and you will go to the IP Assignment page.
If the device has accessed the network, click Start Setup, and you will go to the WiFi Settings page.
2.2.2 IP Assignment
The system will check IP assignment automatically. It is recommended to select DHCP. If you select PPPoE, please enter
the PPPoE account provided by the ISP.
Figure 2-2-2 IP Assignment

Configuration Guide Configuration Guide
4
2.2.3 WiFi Settings
Configure the SSID, WiFi password and management password and Click Deliver Setup.
Figure 2-2-3 WiFi Settings

Configuration Guide Configuration Guide
5
You can change the IP assignment mode by clicking Change IP Assignment in the upper right corner.
2.2.4 Finish
After the configuration is delivered, click Finish to enter the homepage.

Configuration Guide Configuration Guide
6
2.3 GUI
2.3.1 Phone-Based GUI
The system switches between the phone-based GUI and PC-based GUI according to the screen width and browser type.
The phone-based GUI is more concise.
Figure 2-3-1 Phone-Based GUI

Configuration Guide Configuration Guide
7
2.3.2 PC-Based GUI
Click Pro in the upper right corner of phone-based GUI to switch over to the PC-based GUI. The PC-based GUI provides
more configuration items. For details, see eWeb Configuration.
Figure 2-3-2 PC-Based GUI

Configuration Guide eWeb Configuration
1
3 eWeb Configuration
This chapter introduces the features on the PC-based GUI.
3.1 Overview
The Overview page displays the device details, WiFi and interface details.
Figure 3-1 Overview
3.2 Online Clients
The Online Clients module allows you to view online clients.
Figure 3-2-1 Online Clients

Configuration Guide eWeb Configuration
2
Figure 3-2-2 Advanced Search
3.3 Basics
3.3.1 WAN
The WAN module allows you to configureWAN settings. There are three IP assignment modes available: Static IP Address,
DHCP and PPPoE.
Figure 3-3-1 WAN Settings

Configuration Guide eWeb Configuration
3
3.3.2 LAN
The LAN module contains LAN Settings, DHCP Clients, Static IP Addresses and DNS Proxy.
3.3.2.1 LAN Settings
The LAN module allows you to set the IP address of the LAN port and DHCP status.
Figure 3-3-2 LAN Settings
Click Edit in the Action column to add a VLAN. In the displayed dialog box, configure settings and click OK.

Configuration Guide eWeb Configuration
4
Figure 3-3-3 Edit
You can click in the upper right corner to see description about each configuration item.
3.3.2.2 DHCP Clients
The DHCP Clients page displays DHCP clients.

Configuration Guide eWeb Configuration
5
Figure 3-3-4 DHCP Clients
Click Convert to Static IP in the Action column to convert a DHCP-assigned IP address to a static IP address. Alternatively,
select DHCP-assigned IP addresses and click Batch Convert to convert more than one IP address.
3.3.2.3 Static IP Addresses
The Static IP Addresses module allows you to add, delete and edit static IP addresses.
Figure 3-3-5 Static IP Addresses

Configuration Guide eWeb Configuration
6
Click Add to add a static IP address manually. In the displayed dialog box, configure settings and click OK.
Figure 3-3-6 Add Static IP Address
.
3.3.2.4 DNS Proxy
The DNS Proxy module allows you to configure DNS proxy settings.
Figure 3-3-7 DNS Proxy

Configuration Guide eWeb Configuration
7
3.3.3 Work Mode
The Work Mode module displays the current mode and the other available modes.
Figure 3-3-8 Router Mode
Switch the device over to the wired repeater mode.
Figure 3-3-9 Wired Repeater

Configuration Guide eWeb Configuration
8
Switch the device over to the wireless repeater mode.
Figure 3-3-10 Wireless Repeater