Ruijie Reyee RG-RAP2260 Installation and operating manual

Ruijie Reyee RG-RAP2260(H) Access Point
Hardware Installation and Reference Guide
Document Version: V1.1
Date: 2022.12.06
Copyright © 2022 Ruijie Networks

Copyright
Copyright © 2022 Ruijie Networks
All rights are reserved in this document and this statement.
Without the prior written consent of Ruijie Networks, any organization or individual shall not reproduce, extract,
back up, modify, or propagate the content of this document in any manner or in any form, or translate it into other
languages or use some or all parts of the document for commercial purposes.
, and other Ruijie networks logos are trademarks of Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms, and some or
all of the products, services, or features described in this document may not be available for you to purchase or
use. Except for the agreement in the contract, Ruijie Networks makes no explicit or implicit statements or
warranties with respect to the content of this document.
The content of this document will be updated from time to time due to product version upgrades or other reasons,
Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is designed merely as a user guide. Ruijie Networks has tried its best to ensure the accuracy and
reliability of the content when compiling this manual, but it does not guarantee that the content of the manual is
completely free of errors or omissions, and all the information in this manual does not constitute any explicit or
implicit warranties.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
The official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee
Technical Support Website: https://www.ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [email protected]
Conventions
1. GUI Symbols
Interface
symbol
Description
Example
Boldface
1. Button names
2. Window names, tab name, field name and
menu items
3. Link
1. Click OK.
2. Select Config Wizard.
3. Click the Download File link.
>
Multi-level menus items
Select System >Time.
2. Signs
The signs used in this document are described as follows:
Danger
An alert that calls attention to safety instruction that if not understood or followed can result in personal injury.
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.

II
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.
3. Note
This manual provides installation steps, troubleshooting, technical specifications, and usage guidelines for
cables and connectors. It is intended for users who want to understand the above and have extensive experience
in network deployment and management, and assume that users are familiar with related terms and concepts.

I
Contents
Preface.................................................................................................................................................. I
1 Product Overview.............................................................................................................................. 1
1.1 About the RG-RAP2260(H) Access Point.................................................................................1
1.2 Package Contents......................................................................................................................1
1.3 Hardware Features....................................................................................................................1
1.3.1 Top Panel.......................................................................................................................1
1.3.2 Bottom Panel..................................................................................................................3
1.4 Technical Specifications............................................................................................................4
1.5 Power Specifications .................................................................................................................5
1.6 Cooling Solution.........................................................................................................................6
2 Preparing for Installation................................................................................................................... 7
2.1 Safety Precautions.....................................................................................................................7
2.1.1 General Safety Precautions...........................................................................................7
2.1.2 Handling Safety..............................................................................................................7
2.1.3 Electric Safety................................................................................................................7
2.2 Installation Environment Requirements.....................................................................................8
2.2.1 Installation Requirements..............................................................................................8
2.2.2 Ventilation Requirements...............................................................................................8
2.2.3 Temperature/Humidity Requirements............................................................................8
2.2.4 Cleanliness Requirements.............................................................................................8
2.2.5 Anti-interference Requirements.....................................................................................9
2.3 Tools ..........................................................................................................................................9
3 Installing theAccess Point.............................................................................................................. 10

II
3.1 Before You Begin.....................................................................................................................10
3.2 Precautions for Installation ......................................................................................................10
3.3 Precautions for Cabling ...........................................................................................................10
3.4 Installing the Access Point.......................................................................................................11
3.5 Removing the Access Point.....................................................................................................13
3.6 Checking after Installation .......................................................................................................14
4 Verifying Operating Status .............................................................................................................. 16
4.1 Setting up Configuration Environment.....................................................................................16
4.2 Powering on the Access Point.................................................................................................16
4.2.1 Checklist before Power-on...........................................................................................16
4.2.2 Checklist after Power-on (Recommended) .................................................................16
5 Monitoring and Maintenance........................................................................................................... 17
5.1 Monitoring................................................................................................................................17
5.2 Maintenance ............................................................................................................................17
6 Troubleshooting............................................................................................................................... 18
6.1 Troubleshooting Procedure .....................................................................................................18
7 Appendix.......................................................................................................................................... 19
7.1 Connectors and Media.............................................................................................................19

Hardware Installation and Reference Guide Product Overview
1
1 Product Overview
1.1 About the RG-RAP2260(H) Access Point
The RG-RAP2260(H) AX6000 is a ceiling-mount dual-radio access point designed to cover a large indoor area.
The access point adopts either IEEE 802.3at/bt PoE power supply or 48 V DC/1 Alocal power supply. Compliant
with the IEEE 802.11a/b/g/n/ac/ax standard, the access point can work in the 2.4 GHz and 5 GHz bands at the
same time and supports quad-stream MU-MIMO. The access point delivers a combined data rate of about 6000
Mbps, with up to 1148 Mbps in the 2.4 GHz band and 4804 Mbps in the 5 GHz band. With two 2.5GE Ethernet
ports, the access point offers high-speed Internet access and meets diversified networking needs.
1.2 Package Contents
Table 1-1 Package Contents
Item
Quantity
RG-RAP2260(H) Access Point
1
User Manual
1
Certificate of Quality
1
Screws and Wall Anchors
4
Mounting Bracket
1
Key to Security Lock
1
Note
The package contents generally contain the above items. The actual delivery is subject to the order contract.
And please check your goods carefully against the order contract. If you have any questions, please contact
the distributor.
1.3 Hardware Features
1.3.1 Top Panel
The RG-RAP2260(H) provides two Ethernet ports (LAN1/PoE port is PoE-capable) and one DC input plug .

Hardware Installation and Reference Guide Product Overview
2
Figure 1-1 Access Point
Table 1-2 LED
Status
Description
Off
The access point is not receiving power.
Slow Blinking
The access point is operating normally but there is an alarm
generated.
Fast blinking
Possible cases:
Restoring the access point to factory settings.
Upgrading the firmware.
Handling alarms automatically.
Starting up the access point.
Solid blue
The access point is operating normally with no alarms.

Hardware Installation and Reference Guide Product Overview
3
1.3.2 Bottom Panel
Figure 1-1 Ports
Table 1-3 Bottom Panel
No.
Item
Description
1
RESET Hole
The RESET hole is near the 2.5G/LAN2 port.
Press and hold the pin to the RESET hole for less than 2 seconds:
Restart the access point.
Press and hold the pin to the RESET hole for 2 seconds to 5
seconds: There is no action on the access point.
Press and hold the pin to the RESET hole for more than 5 seconds:
Restore the access point to factory settings.
2
2.5G/LAN2 Port
2.5GE LAN Port
3
2.5G/LAN1/PoE Port
2.5GE LAN Port (PoE-Capable)
4
DC Input Plug
48 V DC/1 A power supply
Caution
If the access point adopts PoE power supply, make sure that the power source equipment (PSE) connected to
the LAN1/PoE port is compliant with the IEEE 802.3at/bt standard.

Hardware Installation and Reference Guide Product Overview
4
1.4 Technical Specifications
Table 1-4 Technical Specifications
RF Design
2.4 GHz: 4 spatial steams
5 GHz: 4 spatial steams
Standard & Protocol
Concurrent 802.11ax, 802.11ac wave2/wave1 and 802.11a/b/g/n
Operating Radio
802.11b/g/n/ax: 2.4 GHz to 2.4835 GHz
802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.470 GHz to 5.850 GHz
Antenna
Omni-directional antenna (2.4 GHz: 3 dBi, 5 GHz: 4 dBi)
Spatial Streams
2.4 GHz: 4 x 4 MIMO
5 GHz: 4 x 4 MIMO
Max Data Rate
2.4 GHz: 1148 Mbps
5 GHz: 4804 Mbps
Combined: 5952 Mbps
Modulation
OFDM: BPSK@6/9 Mbps, QPSK@12/18 Mbps, 16QAM@24 Mbps,
64QAM@48/54 Mbps
DSSS: DBPSK@1 Mbps, DQPSK@2 Mbps, [email protected]/11 Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM
OFDMA
Receive Sensitivity
11b: -96 dBm (1 Mbps), -93 dBm (5 Mbps), -89 dBm (11 Mbps)
11a/g: -91 dBm (6 Mbps), -85 dBm (24 Mbps), -80 dBm (36M bps), -74 dBm (54
Mbps)
11n: -90 dBm (MCS0), -70 dBm (MCS7), -89 dBm (MCS8), -68 dBm (MCS15)
11ac: 20 MHz: -88 dBm (MCS0), -63 dBm (MCS9)
11ac: 40 MHz: -85 dBm (MCS0), -60 dBm (MCS9)
11ac: 80 MHz: -85 dBm (MCS0), -60 dBm (MCS9)
11ax: 80 MHz: -82 dBm (MCS0), -57 dBm (MCS9), -52 dBm (MCS11)
11ax: 160 MHz: -80 dBm (MCS0), -55 dBm (MCS9), -49 dBm (MCS11)
Transmit Power
EIRP:
≤35 dBm (2.4 GHz)
≤36 dBm (5 GHz)
country-specific restrictions apply
Myamar:
2400 MHz to 2483.5 MHz: ≤20 dBm
5150 MHz to 5350 MHz: ≤23 dBm
5470 MHz to 5850 MHz: ≤25 dBm

Hardware Installation and Reference Guide Product Overview
5
Thailand:
2400 MHz to 2483.5 MHz: ≤20 dBm
5150 MHz to 5350 MHz: ≤23 dBm
5470 MHz to 5725 MHz: ≤25 dBm
5725 MHz to 5850 MHz: ≤30 dBm
Power Adjustment
Configurable in increments of 1 dBm
Dimensions
(W x D x H)
230 mm x 230 mm x 49.5 mm (9.05 in. x 9.05 in. x 1.95 in., without the
mounting bracket)
Weight
≤1.8 kg (3.97 lbs, without the mounting bracket)
Service Ports
Two 10/100/1000/2500Base Ethernet ports
LAN1 port is PoE-capable
Management Ports
N/A
LED
One LED (Blue)
Power Supply
There are three power supply modes available:
Standard PoE: IEEE 802.3bt standard (PoE++), backward compatible with
the IEEE 802.3at standard (PoE+, with a data rate of up to 573 Mbps in the
2.4 GHz band and a data rate of up to 2400 Mbps in the 5 GHz band)
60 W Passive PoE adapter (Optional accessory)
Local power supply: 48 V DC /1 A
Note: The access point is not 802.3af-compliant.
Max Power
Consumption
≤40 W
Temperature
Operating: 0°C to 40°C (32°F to 104°F)
Storage: –40°C to 70°C (–40°F to 158°F)
Humidity
Operating: 5% to 95% RH (non-condensing)
Storage: 5% to 95% RH (non-condensing)
Mounting Method
Ceiling/wall mounting
Certification
CE
MTBF
> 400000 hours
1.5 Power Specifications
The access point can be powered by either PoE or DC power supply.
In a PoE power supply scenario, the power source equipment (PSE) must be at least 802.3at-capable. You

Hardware Installation and Reference Guide Product Overview
6
are advised to use an 802.3bt-capable PSE. If you want to use a PoE adapter, a Rujie-certificated PoE
adapter is recommended.
In a DC power supply scenario, use a 48 V DC/1 A power adapter with a 5.5 mm x 2.1 mm x 10 mm (0.22 in.
x 0.08 in. x 0.39 in.) plug.
Table 1-5 Power Supply Mode
Power Input
Standard PoE: IEEE 802.3bt standard, backward compatible with the IEEE 802.3at
standard
Local power supply: 48 V DC/1 A
Power Supply Mode
2.4 GHz
5 GHz
Data Rate
Max. Power
Consumption
IEEE 802.3bt
Standard
(Recommended)
4 x 4
4 x 4
5952 Mbps
40 W
60 W Passive PoE
Adapter (Optional
Accessory)
4 x 4
4 x 4
5952 Mbps
40 W
Local Power Supply
(48 V DC /1 A)
4 x 4
4 x 4
5952 Mbps
40 W
IEEE 802.3at
Standard
2 x 2
2 x 2
2976 Mbps
25 W
Warning
The access point is not 802.3af-compliant.
1.6 Cooling Solution
The access point adopts fanless design. Maintain a sufficient clearance around the access point for proper
ventilation.

Hardware Installation and Reference Guide Preparing for Installation
7
2 Preparing for Installation
2.1 Safety Precautions
Note
●To prevent device damage and physical injury, please read the safety recommendations carefully as
described in this chapter.
●Recommendations do not cover all possible hazardous situations.
2.1.1 General Safety Precautions
Do not expose the AP to high temperature, dust, or harmful gases.
Do not install the AP in an area prone to fire or explosions.
Keep the AP away from EMI sources such as large radar stations, radio stations, and substations.
Do not subject the AP to unstable voltage, vibration, and noises.
The installation site should be dry. Keep the AP at least 500 meters away from the ocean and do not face it
towards the sea breeze.
The installation site should be free from water including possible flooding, seepage, dripping, or condensation.
The installation site should be selected according to network planning and communications equipment
features, and considerations such as climate, hydrology, geology, earthquake, electrical power, and
transportation.
Caution
Please follow the correct method described in the installation guide to install and remove the device.
2.1.2 Handling Safety
Do not move the access point frequently.
Turn off all power supplies and unplug all power cables before you remove the device.
2.1.3 Electric Safety
Warning
●Any nonstandard and inaccurate electrical operation can cause an accident such as fire or electric shock,
thus causing severe even fatal damages to humans and devices.
●Direct or indirect contact with a wet object (or your finger) on the high voltage and power line can be fatal.
Please observe local regulations and specifications when performing electrical operations. Relevant
operators must be qualified.
Carefully check for any potential hazards in the working area such as damp/wet ground or floors.

Hardware Installation and Reference Guide Preparing for Installation
8
Find the location of the emergency power supply switch in the room before installation. Cut off the power
supply first in case of an accident.
Be sure to make a careful check before shutting down the power supply.
Do not place the device in a damp/wet location. Do not let any liquid enter the chassis.
Keep the AP far away from grounding or lightning protection devices for power equipment.
Keep the AP away from radio stations, radar stations, high-frequency high-current devices, and microwave
ovens.
2.2 Installation Environment Requirements
The AP must be installed indoors. To ensure normal operation, the installation site must meet the following
requirements.
2.2.1 Installation Requirements
Install the AP in a well-ventilated environment. If it is installed in a closed room, make sure there is a good
cooling system.
Make sure the site is sturdy enough to support the RG-RAP2260(H) and its accessories.
Make sure the site has enough space for installing the RG-RAP2260(H) and leave sufficient room around
the AP for ventilation.
2.2.2 Ventilation Requirements
The access point adopts natural cooling. Reserve a sufficient clearance around the access point to ensure
proper ventilation.
2.2.3 Temperature/Humidity Requirements
To ensure the normal operationand equipment service life,maintain appropriate temperature and humidity levels
in the equipment room. Improper room temperature and humidity can cause damage to the device.
High relative humidity mayaffect insulationmaterials, resulting in poor insulation and even electrical leakage.
Sometimes it may lead to changes in the mechanical properties of materials and corrosion of metal parts.
Low relative humidity can dry and shrink insulation sheets and cause static electricity that can damage the
circuitry.
High temperatures greatly reduce device reliability and shorten service life.
Table 2-1 Temperature and Humidity Requirement
Operating Temperature
Relative Humidity
0ºC to 40ºC (32°F to 104°F)
5% to 95% (non-condensing)
2.2.4 Cleanliness Requirements
Dust poses a serious threat to device operation. Dust on the surface of the device can be absorbed onto metal
contact points by static electricity causing poor contact. Electrostatic absorption of dust occurs more easily when

Hardware Installation and Reference Guide Preparing for Installation
9
the relative humidity is low, and might shorten the equipment service life and cause communication failures. The
following table shows the maximum concentration and diameter of dust allowed in the equipment room.
Maximum Diameter (μm)
0.5
1
3
5
Maximum Concentration
(Particles/m3)
1.4 × 107
7 × 105
2.4 × 105
1.3 × 105
The amount of salt, acids and sulfides in the air are also strictly limited for the equipment room. These
substances can accelerate metal corrosion and aging of some parts. The following table describes the limits of
some hazardous gases such as sulfur dioxide, hydrogen sulfide, nitrogen dioxide, ammonia gas and chlorine
gasin the equipment room.
Gas
Average (mg/m3)
Maximum (mg/m3)
Sulfur dioxide (SO2)
0.2
1.5
Hydrogen sulfide (H2S)
0.006
0.03
Nitrogen dioxide (NO2)
0.04
0.15
Ammonia gas (NH3)
0.05
0.15
Chlorine gas (CI2)
0.01
0.3
2.2.5 Anti-interference Requirements
Keep the access point as far away from the lightning prevention equipment and grounding equipment of the
power device as possible.
Keep the access point far away from radio stations, radar stations, high-frequency high-current devices, and
microwave ovens.
2.3 Tools
Table 2-2 Tools
Common Tools
Phillips screwdrivers, power cords, Ethernet cables, fastening bolts, diagonal pliers,
and binding straps
Special Tools
Antistatic gloves, wire stripper, crimping pliers, crystal connector crimping pliers, and
wire cutter
Meter
Multimeter
Relevant Devices
PC, display, and keyboard
Note
The RG-RAP2260(H) is delivered without a tool kit. The tool kit is customer-supplied.

Hardware Installation and Reference Guide Installing the Access Point
10
3 Installing the Access Point
Caution
Before installing the access point, make sure you have carefully read the requirements described in Chapter 2.
3.1 Before You Begin
Carefully plan and arrange the installation position, networking mode, power supply, and cabling before
installation. Confirm the following requirements before installation:
The installation site provides sufficient space for proper ventilation.
The installation site meets the temperature and humidity requirements of the access point.
The power supply and required current are available in the installation site.
The selected power supply modules meet the system power requirements.
The installation site meets the cabling requirements of the access point.
The installation site meets the site requirements of the access point.
The customized access point meets the client-specific requirements.
3.2 Precautions for Installation
To avoid damage to the access point, observe the following safety precautions:
Do not power on the access point during installation.
Install the access point in a well-ventilated location.
Do not subject the access point to high temperature.
Keep the access point away from high voltage cables.
Do not expose the access point in a thunderstorm or strong electric field.
Keep the access point clean and dust-free.
Cut off the power switch before cleaning the access point.
Do not wipe the device with a damp cloth.
Do not wash the device with liquid.
Do not open the enclosure when the access point is working.
Secure the access point tightly.
3.3 Precautions for Cabling
Connect the UTP/STP to the LAN port on the AP. See 7.1 Connectors and Media for the supported wiring
for twisted pairs.
Avoid bending the cable in a small radius close to the connector.
Ruijie recommends that you do not use Ethernet cables with protective sleeves as they could make

Hardware Installation and Reference Guide Installing the Access Point
11
installation of Ethernet cables more difficult.
If the access point adopts PoE power supply, make sure that the power source equipment (PSE) connected
to the LAN1/PoE port is 802.3at-capable or 802.3bt-capable.
3.4 Installing the Access Point
Caution
●You are advised to install the access point where you can get the optimal Wi-Fi coverage.
●Image is for indicative purpose only and may not represent exact equipment.
(1) Do you want to engage the security lock?
○No. Go to the next step.
○Yes. Loosen the security screw and engage the security lock.
Figure 3-1 Loosening the Security Screw
(2) Drill four holes at 53 mm (2.09 in) spacing on the wall or ceiling.
Figure 3-2 Drilling Four Holes on the Wall or Ceiling

Hardware Installation and Reference Guide Installing the Access Point
12
(3) Take out the mounting bracket from the packaging material, and secure the mounting bracket on the ceiling
or wall by using self-tapping screws.
Figure 3-3 Securing the Mounting Bracket
(4) Connect the Ethernet cable to the LAN port on the rear ofAP (LAN1/PoE port is PoE-capable).
Figure 3-4 Connecting the Ethernet Cable to the LAN Port
(5) Align the square feet on the rear of the AP over the mounting holes on the bracket. Slide the AP into the
mounting holes.
Caution
●The AP can be installed in any of four directions on the mounting bracket depending on how you route the
Ethernet cable.
●The square feet should fit easily into the mounting holes. Do not forcibly push the AP into the mounting
holes.
●After installation, verify that the AP is securely fastened.

Hardware Installation and Reference Guide Installing the Access Point
13
Figure 3-5 Securing the Access Point
3.5 Removing the Access Point
Security Lock is Not Used
Hold the AP in your hands and push it away from the bracket. Attempt to slide it in four directions (the AP
can only slide out in one direction).
Security Lock is Used
(1) If the security lock is used, keep the top of the key against the edge of the mounting bracket (with the Ruijie
logo on the key pointed upwards).
(2) Slide the key along with the four edges of the mounting bracket, and attempt to insert the key into the keyhole.
It can only be inserted into one marked keyhole.
Figure 3-6 Inserting the Key for Unlocking
(3) Hold the AP in your hands and push it upward and away from the bracket.

Hardware Installation and Reference Guide Installing the Access Point
14
Figure 3-7 Removing the Wall Mount AP
Figure 3-8 Removing the Ceiling Mount AP
3.6 Checking after Installation
(1) Checking the Access Point
○Verify that the power source equipment (PSE) connected to the LAN1/PoE port is 802.3at-capable or
802.3bt-capable.
○Verify that the access point is properly secured.