Sanus SA405 User manual

SA405
INSTRUCTION MANUAL
If you have any questions along the way, just give us a call:
1-800-359-5520 We’re ready to help!
We’ll Make It Stress-Free

2
Please verify the following items:
Your TV, soundbar, soundbar mount, and any accessories you
plan to install DO NOT EXCEED the specified weight limit of
your TV wall mount.
You read and understand these directions.
You refer to the documentation that came with your sound bar,
your TV and your TV wall mount for additional guidance.
You have the tools needed for installation.
You CAN NOT use this product if your TV mount’s interface bracket:
includes built-in/integrated spacers (see Figure 1), or
the mounting holes/slots are greater than 11mm [.43 in.] (see Figure 2).
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Before You Begin
Figure 2
Figure 1

3
WARNING:
• This soundbar mount is only designed for use with TV wall mounts that meet third party
safety certifications.
• This soundbar mount is ONLY designed to mount BELOW the television (see Figure 3).
• This soundbar mount is designed to be installed and utilized only as specified in this manual.
The manufacturer is not responsible for improper assembly, use, or handling of this product.
• Your wall must be capable of supporting five times the weight of your TV, TV mount, and
soundbar combined.
• Failure to follow these instructions could result in an unstable situation that may result
in property damage or personal injury.
TV
Soundbar
Figure 3
If you have any questions,
please contact
Customer Service:
1-800-359-5520

4
Weight Restrictions
Weight Limit for SA405
Weight Limit for Your TV Mount
DO NOT EXCEED 15 lbs. (6.8 kg)
for this Soundbar Mount
15 lbs.
(6.8 kg)
CAUTION: Avoid potential personal injuries and property damage!
The weight of your TV, PLUS this soundbar mount, your soundbar, and any accessories, MUST BE LOWER
than the maximum weight rating of your TV mount. See your TV mount's manual for maximum weight allowed.
2 lbs.
(0.9 kg)
__ kg
(__ lbs.)
__ kg
(__ lbs.)
__ kg
(__ lbs.)
(plus) (plus) (plus) (equals)
Soundbar
Mount ANY Other
Accessories
Your
Soundbar Your TV
TOTAL
WEIGHT
Maximum for
Your TV Mount

5
3rd Party Certified
TV Wall Mount *
*Your TV wall mount may vary from the
illustrations throughout this manual —
note that the procedure to install the
soundbar is the same.
Items Needed
Included in this Kit
H
Phillips Screwdriver
Level
3/16 in. Hex Key

6
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged,
do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
Parts and Hardware for STEP 1
01 x 2 x 2
02
x 2
03
x 2
04
Soundbar
Bracket
Fender
Washer
Keyhole
Screw
Keyhole Screw
Knob
Supplied Parts and Hardware

7
x 2
05
Parts and Hardware for STEP 1 & STEP 3
M4/M5
06 x 4
M4/M5
08 x 4
M6/M8
07 x 8
M6/M8
09 x 4
Mount Spacer
Washer
Large
Washer
Washer
Large
Washer

8
Parts and Hardware for STEP 1 & STEP 3 (continued)
M8 x 20mm
14 x 4
M6 x 25mm
13 x 4
M6 x 16mm
12 x 6
M5 x 16mm
11 x 4
M4 x 16mm
10 x 4

9
M8 x 40mm
19 x 4
M6 x 50mm
18 x 4
22mm
20 x 4
M6 x 40mm
17 x 4
M5 x 40mm
16 x 4
M4 x 40mm
15 x 4
TV Spacers

10
Secure the Brackets onto Your Sound Bar
STEP 1
Look at the mounting holes on the
back of your soundbar to determine
your install method A, B or C.
OPTION A: Rivets with a manufacturer’s
supplied hanger bracket
OPTION B: Key hole slots
OPTION C: Threaded inserts

11
Attach the soundbar brackets 01 to
your soundbar’s hanger bracket with
knobs 04 and keyhole screws 03 .
SOUNDBAR MANUFACTURER
SUPPLIED HANGER BRACKET
Rivets with a Manufacturer’s Supplied Hanger Bracket
OPTION A :
04
01
03
Bottom of
Soundbar
& Hanger
Bracket

12
Assemble knobs 04 and keyhole screws 03 .
Attach the soundbar brackets 01 to
your soundbar using the knob assemblies.
Key Hole Slots
04
03
OPTION B :
02
IMPORTANT: If needed, use fender washers 02 under
soundbar bracket 01 to rest flat onto the soundbar surface.

13
01
01
Bottom of Soundbar

14
Attach the soundbar brackets 01 to your soundbar using
two screws 10 , 11 or 12 and washers 06 or 07 .
Threaded Inserts
OPTION C :
02
IMPORTANT: If needed, use fender washers 02 under
soundbar bracket 01 to rest flat onto the soundbar surface.

15
Bottom of Soundbar
01
10 11 12
06 07
screws
M4 M5 M6
washers

16
STEP 2 Prepare Your TV (if mounted)
1
If your TV is already mounted:
CAUTION: Follow your TV mount’s manual for
instructions on how to safely remove your TV and TV bracket.
1. Remove any cables attached to your TV.
2. Remove your TV/bracket assembly from your wall
plate, arm assembly, or pillar.
HEAVY! You may need assistance with this step!
3. Remove the TV bracket(s) and hardware from your TV.

17
2 3

18
STEP 3 Install Soundbar Bracket with Your TV Mount
Determine which screw diameter
fits your monitor or TV —
M4, M5, M6, or M8.
• ForTVs with a flat/
unobstructed back,
follow Step 3.1. *
• ForTVs with a rounded/
irregular/obstructed back,
follow Step 3.2.
*If you need extra space to
accommodate cables, recesses,
or protrusions, follow Step 3.2.
Step 3.1 Step 3.2

19
CAUTION: Verify adequate
thread engagement with
your screw/washer/spacer
combination AND all brackets.
—Too short will not hold theTV.
—Too long will damage the TV.
Standard configurations shown.
For special applications, contact
Customer Service.
IMPORTANT: To offset the shift in
height of your TV bracket, due to the
soundbar brackets 01 , you MUST use
washers 05 , in the top hole locations.
Side View
Step 3.1 Step 3.2
05 05
01 01
20

20
STEP 3.1
Option 1
Option 2
*WARNING: You must use
the larger washers 08 or 09
(unless they do not fit yourTV bracket).
WARNING: Soundbar MUST
NOT be mounted onTOP of yourTV.
05
01
10 11 12 13 14
06 08 07 09
screws
M4 M5 M6 M6 M8
washers
**
Install yourTV mount’s interface bracket
with soundbar brackets 01 and washers
05 .
NOTE: Sound bar brackets 01 AND
washers 05 install BETWEEN yourTV
andTV brackets.
NOTE: Extra screws and washers are
provided, if needed for better fit
(TV screws are too short- or too long).