Sauder 416407 User manual

sauder.com
4-Drawer Chest
Storybook Collection | Model 416407
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 530754 06/19/19
Purchased: __________________
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Share your journey!
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-523-3987.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
WARNING
CHOKING HAZARD - Small Parts
Not for children under 3 years.
Adult assembly required.

No. 2 Phillips Screwdriver
Tip Shown Actual Size
Table of Contents Assembly Tools Required
Hammer
Not actual size
Skip the power trip.
This time.
2-3
4
5-18
19-21
22-24
25-26
27
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
416407 www.sauder.com/servicePage 2
A2 RIGHT END (1)
B2 LEFT END (1)
C2 TOP (1)
D BACK (1)
D36 RIGHT DRAWER SIDE (4)
D37
LEFT DRAWER SIDE (4) - 1 with label
D175 DRAWER BACK (4)
D982 DRAWER BOTTOM (4)
E BACK BRACE (1)
F FRONT BRACE (1)
G BRACE (1)
H DRAWER FRONT (4)
I BASE (1)
J TOP MOLDING (1)
M67
DRAWER BRACE (4)
(Hidden part using recycled
material. Color may vary.)
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
Part Identification

Part Identification
416407www.sauder.com/service Page 3
A2
B2
C2
D
E
F
G
H
I
J
D36
D37
D175
D982
M67

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
416407 www.sauder.com/servicePage 4
BLACK 1-1/8" PAN HEAD SCREW - 4
9S
BLACK 9/16" LARGE HEAD SCREW - 24
1S
SILVER 1-1/8" FLAT HEAD SCREW - 3
10S
BLACK 1-1/4" FLAT HEAD SCREW - 2
7S
3S GOLD 5/16" FLAT HEAD SCREW - 32
METAL PIN - 2
1R
TACK
GLIDE - 6
13E
NAIL - 38
1N
HIDDEN
CAM - 14
1F
CAM DOWEL - 14
2F KNOB - 4
91K
35AA UNIVERSAL
CABINET RAIL - 8 35AC DRAWER RIGHT - 435AD DRAWER LEFT - 4
DRAWER FRONT
BRACKET - 4
9G
METAL
BRACKET - 4
4G
30S BLACK 1-9/16" FLAT HEAD SCREW - 20
FURNITURE TIPPING RESTRAINT KIT - 1
97

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Push fourteen HIDDEN CAMS (1F) into the ENDS (A2 and B2)
and BRACES (E, F, and, M67). Then, insert the metal end of a
CAM DOWEL (2F) into each HIDDEN CAM.
416407www.sauder.com/service Page 5
Arrow
1F
2F
(14 used)
Arrow
1F
2F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not tighten the HIDDEN CAMS in this step.
A2
B2
E
F
M67
M67
M67
M67

Step 2
416407 www.sauder.com/servicePage 6
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
3S
A2
B2
1
2
3
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Finished edge
2
3
1
Finished edge
å Fasten the UNIVERSAL CABINET RAILS* (35AA) to the
ENDS (A2 and B2 ). Use sixteen GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
å *patent pending glide system
Glide end
Glide end
1
2
3
1
2
3
1
2
3
2
3
1
2
3
1
2
3
1
VIEW THE DRAWER GLIDE VIDEO

Step 3
416407www.sauder.com/service Page 7
Remember:
Righty tighty.
Lefty loosey.
å Fasten four METAL BRACKETS (4G) to the BASE (I). Use
four BLACK 9/16" LARGE HEAD SCREWS (1S).
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
1S
4G
4G
I

Step 4
416407 www.sauder.com/servicePage 8
å Fasten the LEFT END (B2) to the TOP (C2). Tighten two
HIDDEN CAMS.
å Fasten the BACK BRACE (E) to the LEFT END (B2).
Tighten two HIDDEN CAMS.
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
B2
Finished edge
E
C2
Surface with HIDDEN CAMS
Surface
with
HIDDEN
CAMS
Rounded edge
Surface with holes
These edges must be even.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution

Step 5
416407www.sauder.com/service Page 9
Arrow
Minimum
190 degrees
Maximum
210 degrees
B2
E
C2
F
A2
1R
å Insert two METAL PINS (1R) into the FRONT BRACE (F).
å Fasten the FRONT BRACE (F) to the LEFT END (B2).
Tighten the HIDDEN CAM.
å NOTE: Be sure the METAL PIN in the FRONT BRACE
inserts into the hole in the LEFT END.
å Fasten the RIGHT END (A2) to the TOP (C2) and
BRACES (E and F). Tighten five HIDDEN CAMS.
å NOTE: Be sure the METAL PIN in the FRONT BRACE
inserts into the hole in the RIGHT END.
Surface without
HIDDEN CAMS
Finished edge
Surface with HIDDEN CAMS
Finished edge

Step 6
416407 www.sauder.com/servicePage 10
å Fasten the TOP MOLDING (J) to the TOP (C2). Use three
SILVER 1-1/8" FLAT HEAD SCREWS (10S).
å NOTE: Do not overtighten the SCREWS into the TOP.
å Fasten the BASE (I) to the ENDS (A2 and B2). Use four
BLACK 9/16" LARGE HEAD SCREWS (1S) through the
METAL BRACKETS on the BASE and into the ENDS.
B2
C2
A2
J
I
SILVER 1-1/8" FLAT HEAD SCREW
(3 used for the TOP MOLDING)
10S
Curved edge
BLACK 9/16" LARGE HEAD SCREW
(4 used for the BASE)
1S
Curved edge