Sauder Aspen Post 427015 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-523-3987.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Sauder.com
Share your journey!
Enlish p 1-25
Français p 26-28
Español p 29-31
Lot # 545014 08/05/20
Purchased: __________________
Library Base
Aspen Post Collection | Model 427015
Express yourshelf.

Table of Contents Assembly Tools Required
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
3
4-5
6-25
26-28
29-31
32-34
35
427015 www.sauder.com/servicePae 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
B57 DRAWER BOTTOM (1)
C TOP MOLDING (1)
D DRAWER FRONT (1)
D569 RIGHT DRAWER SIDE (1)
D570 LEFT DRAWER SIDE (1)
D571 DRAWER BACK (1)
D572 DRAWER BOX FRONT (1)
E ADJUSTABLE SHELF (1)
F ADJUSTABLE SHELF MOLDING (1)
G BOTTOM (1)
H BASE (1)
J BACK (1)
K TOP (1)
L LEFT DOOR (1)
M RIGHT DOOR (1)
N DRAWER BRACE (1)
A
B
C
D
E
F
G
H
J
K
L
M
N
B57
D569
D570
D571 D572
427015www.sauder.com/service Pae 3

Hardware Identification
RLEFT DRAWER
SLIDE - 1
LEFT CABINET
RAIL - 1
P
RIGHT CABINET
RAIL - 1
ORIGHT DRAWER
SLIDE - 1
Q
31G CORNER BRACKET - 2
BACK CONNECTOR - 8
39F METAL BRACKET - 6 4G
CAM SCREW - 1
8F WOOD DOWEL - 8 15F
HIDDEN CAM - 1
1F
METAL PIN - 4
1R RUBBER SLEEVE - 4 2R
42H HINGE - 4
MAGNETIC CATCH - 2
3I STRIKE PLATE - 2 6I 191K PULL - 3
427015 www.sauder.com/servicePae 4
105P TWIST-LOCK®
FASTENER COVER - 8
11F TWIST-LOCK®FASTENER - 8

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
GRAY 1-3/8" MACHINE SCREW - 2
39S
BLACK 7/8" LARGE HEAD SCREW - 2
17S
BLACK 1/2" FLAT HEAD SCREW - 2
11S
BLACK 7/8" MACHINE SCREW - 4
37S
30S BLACK 1-9/16" FLAT HEAD SCREW - 5
BLACK 9/16" LARGE HEAD SCREW - 40
1S 3S GOLD 5/16" FLAT HEAD SCREW - 8
427015www.sauder.com/service Pae 5

Hardware Usage Guide
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
2.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
1.
HOW TO USE A TWIST-LOCK®FASTENER
Cam Screw
Hidden Cam
Arrow
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Hole
2. 3.
1
2
Insert the CAM SCREW into the HIDDEN CAM.
Tighten the HIDDEN CAM.
HOW TO USE A HIDDEN CAM & CAM SCREW
Turn the CAM SCREW until
the shoulder is against the
surface of the part.
1.
427015 www.sauder.com/servicePae 6

Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å To bein assembly, push four SAUDER TWIST-LOCK®
FASTENERS (11F) into the lare holes in the ENDS (A and B).
å Insert four WOOD DOWELS (15F) into the ENDS (A and B).
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
A
B
2
11F
Do not tihten the TWIST-LOCK® FASTENERS in this step.
15F
Meet Parts (A and B). These components
have been enineered to be lihter,
stroner, faster… well ok. Not technically
faster. But definitely makes for a sturdier
Library Base that’s easier to assemble and
friendlier to the environment.
427015www.sauder.com/service Pae 7
Just think. The sooner
you do this, the sooner
you do somethin else.

å Fasten the RIGHT CABINET RAIL (O) to the RIGHT END (A)
and the LEFT CABINET RAIL (P) to the LEFT END (B). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S).
Step 2
A
B
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
3S
5
O
P
Roller end
Roller end
427015 www.sauder.com/servicePae 8

å Push four SAUDER TWIST-LOCK® FASTENERS (11F) into the
lare holes in the BOTTOM (G).
å Insert four WOOD DOWELS (15F) into the BOTTOM (G).
Step 3
G
15F
2
11F
Do not tihten the TWIST-LOCK® FASTENERS in this step.
11F
15F
427015www.sauder.com/service Pae 9

å Fasten two METAL BRACKETS (4G) to the BOTTOM (G).
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
å NOTE: Be sure the BRACKETS are even with the edes of
the BOTTOM.
å Fasten two CORNER BRACKETS (31G) to the BOTTOM (G).
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å NOTE: Be sure the CORNER BRACKETS are even with the
edes of the BOTTOM.
Step 4
G
4G
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
31G
31G
1S
1S
427015 www.sauder.com/servicePae 10

Step
å Fasten the ENDS (A and B) to the BOTTOM (G). Tihten
four TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the BOTTOM
insert into the ENDS.
å Fasten the BOTTOM (G) to the ENDS (A and B). Use four
BLACK 9/16" LARGE HEAD SCREWS (1S) throuh the
CORNER BRACKETS on the BOTTOM and into the holes
in the ENDS.
Step 5
A
B
G
2
Roller end
Roller end
Groove
Surface with TWIST-LOCK® FASTENERS
These brackets must be here.
Groove
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
1S
427015www.sauder.com/service Pae 11

Step
å Slide the BACK (J) into the grooves in the ENDS (A and B)
and BOTTOM (G).
å NOTE: Be sure the BACK inserts into the BOTTOM roove.
Step 6
JA
BG
With the palm of your
hand, tap the BACK
down into the roove.
427015 www.sauder.com/servicePae 12
Finished surface - if
placin unit aainst
a wall
Unfinished surface -
if placin unit out in
a room

StepStep 7
J
A
B
K
Part (K). Another
sturdier, easier,
friendlier component!
2
These holes
must be here.
Groove
å Fasten the TOP (K) to the ENDS (A and B). Tihten four
TWIST-LOCK® FASTENERS.
å NOTE: Be sure the BACK inserts into the TOP roove.
å NOTE: Be sure the WOOD DOWELS in the ENDS insert into the TOP.
427015www.sauder.com/service Pae 13

Step
å Fasten four METAL BRACKETS (4G) to the TOP MOLDING (C).
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å NOTE: Be sure the BRACKETS are even with the edes of the
TOP MOLDING.
å Fasten the TOP MOLDING (C) to the TOP (K). Use four
BLACK 9/16" LARGE HEAD SCREWS (1S) throuh the METAL
BRACKETS on the TOP MOLDING and into the holes
in the TOP.
Step 8
K
C
C
4G
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1S
427015 www.sauder.com/servicePae 14

å Fasten BASE (H) to the ENDS (A and B) and BOTTOM (G).
Use six BLACK 9/16" LARGE HEAD SCREWS (1S) throuh
the METAL BRACKETS and CORNER BRACKETS on the
ENDS and BOTTOM and into the holes in the BASE.
Step 9
H
G
A
B
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
Anled ede
427015www.sauder.com/service Pae 15
Now miht be a
ood time to refresh
your drink.

Step
å If you are not placin the unit out in a room, skip this step
and o straiht to Step 11.
å Fasten eiht BACK CONNECTORS (39F) to the
ENDS (A and B), BOTTOM (G), TOP (K), and BACK (J).
Tihten the SCREW in each BACK CONNECTOR.
Step 10
J
Unfinished surface
3" 2"
Screw
Lip
Screw
Lip
Slide the lip into the roove,
then tihten the screw.
427015 www.sauder.com/servicePae 16
A
B
K
G
(8 used)

Step
å Carefully turn your unit onto its front edes.
å Fasten eiht BACK CONNECTORS (39F) to the
ENDS (A and B), BOTTOM (G), TOP (K), and BACK (J).
Tihten the SCREW in each BACK CONNECTOR.
Step 11
G
A
B
J
K
Screw
Screw
Lip
Lip
3" 2"
Slide the lip into the roove,
then tihten the screw.
Unfinished surface
Screw
Lip
Screw
Lip
427015www.sauder.com/service Pae 17

Step
å Slide an ADJUSTABLE SHELF MOLDING* (F) onto the
notched ede of the ADJUSTABLE SHELF (E).
å *U.S. Patent No. 5,499,886
Step 12
E
F
Slide the ADJUSTABLE SHELF
MOLDING (F) onto the notched ede.
Notched ede
The roove
is closer to
this ede.
These surfaces should be even.
427015 www.sauder.com/servicePae 18

Step
å Carefully stand your unit upriht.
å Push the RUBBER SLEEVES (2R) over one end of the
METAL PINS (1R). Insert the METAL PINS into the hole
locations of your choice in the ENDS (A and B). Set the
ADJUSTABLE SHELF (E) onto the METAL PINS.
å Push two MAGNETIC CATCHES (3I) to the BOTTOM (G).
Step 13
G
3I
2R
1R
A
B
E
(4 used)
427015www.sauder.com/service Pae 19

Step
å Fasten the HINGES (42H) to the DOORS (L and M). Use
eiht BLACK 9/16" LARGE HEAD SCREWS (1S).
å Fasten the STRIKE PLATES (6I) to the DOORS (L and M).
Use two BLACK 1/2" FLAT HEAD SCREWS (11S).
Step 14
M
L
42H
42H
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1S
6I
BLACK 1/2" FLAT HEAD SCREW
(2 used in this step)
11S
427015 www.sauder.com/servicePae 20