Sauder 410367 User manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 372649 05/14/15
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
5-Shelf Bookcase
410367
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Great for all those
books you’ll never read.

Table of Contents Assembly Tools Required
2-3
4
5-18
19-21
22-24
25-26
27
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
410367 www.sauder.com/servicesPage 2
Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C LOWER RIGHT END (1)
D LOWER LEFT END (1)
E TOP (1)
F BOTTOM (1)
G SHELF (1)
H LARGE BACK (1)
I BACK (1)
J ADJUSTABLE SHELF (3)
K END MOLDING (2)
M20 TOP MOLDING (1)
M46 BASE (1)
N SHELF MOLDING (3)
O SKIRT (1)
P LOWER END MOLDING (2)

Part Identification Now you know
our ABCs.
410367www.sauder.com/services Page 3
A
B
C
D
E
F
G
H
I
J
K
M46
M20
N
OP
N
N
K
P
J
J

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
410367 www.sauder.com/servicesPage 4
HIDDEN CAM - 12
Q2 CAM DOWEL - 12 R2 SAFETY BRACKET - 1
S
ANGLE BRACKET - 8
TCAM COVER - 8 U
HOLE PLUG - 3
VMETAL PIN - 12 W
BLACK 1-7/8" FLAT HEAD SCREW - 5
XBLACK 1-1/8" PAN HEAD SCREW - 3
Y
BLACK 9/16" LARGE HEAD SCREW - 17
ZNAIL - 55
AA

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty carton to
avoid scratching your unit or the floor.
å Push twelve HIDDEN CAMS (Q2) into the ENDS (A and B),
LOWER ENDS (C and D), and BOTTOM (F). Then, insert the
metal end of a CAM DOWELS (R2) into the HIDDEN CAMS.
410367www.sauder.com/services Page 5
Arrow
Q2
R2
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not tighten the HIDDEN CAMS in this step.
(12 used)
A
B
C
D
F
Remember:
Righty tighty.
Lefty loosey.

Step 2
å Fasten the ENDS (A and B) to the TOP (E). Tighten four
HIDDEN CAMS.
410367 www.sauder.com/servicesPage 6
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
A
B
E
Notched edge
Notched edge
Long Finished edge
Surface with
HIDDEN CAMS
Surface without
HIDDEN CAMS
Surface
with holes
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution

å Fasten the TOP MOLDING (M20) to the TOP (E). Use
three BLACK 1-1/8" PAN HEAD SCREWS (Y).
å Insert three HOLE PLUGS (V) into the holes in the
TOP MOLDING (M20).
Step 3
410367www.sauder.com/services Page 7
Curved edge
E
V
BLACK 1-1/8" PAN HEAD SCREW
(3 used in this step)
Y
M20
Do not overtighten
these SCREWS.

Step 4
å Slide the END MOLDINGS (K) onto the notched edges of
the ENDS (A and B).
å * U.S. Patent No. 5,499,886
410367 www.sauder.com/servicesPage 8
Notched edge
Notched edge
A
B
K
K
Slide the END MOLDINGS (K)
onto the notched edges.

å Fasten the SHELF (G) to the ENDS (A and B). Use four
BLACK 1-7/8" FLAT HEAD SCREWS (X).
Step 5
410367www.sauder.com/services Page 9
A
B
G
Long Finished edge
Surface
with holes
BLACK 1-7/8" FLAT HEAD SCREW
(4 used in this step)
X

Step 6
å Fasten the LOWER LEFT END (D) to the SHELF (G).
Tighten two HIDDEN CAMS.
410367 www.sauder.com/servicesPage 10
Arrow
Minimum
190 degrees
Maximum
210 degrees
D
Notched edge
Surface with
HIDDEN CAMS
G