Sauder Cottage Road 420136 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-445-1527.
Share your journey!
sauder.com
One heck of a sidekick.
Side Table
Cottage Road Collection | Model 420136
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-15
Français pg 16-18
Español pg 19-21
Lot #: 392044
Date Purchased: __________________
07/25/16
Be sure to give us a ring before
making any returns. 1-800-445-1527

Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
3
4
5-15
16-18
19-21
22
23
Page 2 www.sauder.com 420136

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
C TOP (1)
D BOTTOM (1)
E REAR BRACE (1)
F FRONT TOP MOLDING (1)
G FRONT BRACE (1)
H BACK (1)
I DRAWER FRONT (1)
J DRAWER RIGHT SIDE (1)
K DRAWER LEFT SIDE (1)
L DRAWER BACK (1)
M DRAWER BOTTOM (1)
A
B
C
D
EF
G
H
I
J
K
L
M
Page 3www.sauder.com420136

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
CAM SCREW - 18
7
LARGE HIDDEN
CAM - 14
5SMALL HIDDEN
CAM - 4
6WOOD DOWEL - 12 8
RIGHT CABINET
RAIL - 1
1LEFT DRAWER
SLIDE - 1
4
1/2" FLAT HEAD SCREW - 12
14
1-3/16" FLAT HEAD SCREW - 6
11 5/8" MACHINE SCREW - 1
12
1/2" PAN HEAD SCREW - 10
13
10 GLIDE CARD - 1
LEFT CABINET
RAIL - 1
2RIGHT DRAWER
SLIDE - 1
3
Page 4 www.sauder.com 420136
KNOB - 1
9

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Turn ten CAM SCREWS (7) into the ENDS (A and B).
å Fasten the RIGHT CABINET RAIL (1) to the RIGHT END (A)
and the LEFT CABINET RAIL (2) to the LEFT END (B). Use
six 1/2" FLAT HEAD SCREWS (14)
å Push four WOOD DOWELS (8) into the top edges of
ENDS (A and B).
7
7
8
8
(10 used in this step)
2
1
A
B
1/2" FLAT HEAD SCREW
(6 use for the RAILS)
14
14
Page 5www.sauder.com420136

Step 2
å Push eight WOOD DOWELS (8) into the short edges of the
BRACES (E and G) and BOTTOM (D) as shown in the upper diagram.
å Turn four CAM SCREWS (7) into the TOP (C) as shown below.
7
8
8
Page 6 www.sauder.com 420136
Some assembly
(and snacks) required.
C
D
E
G
(4 used)

å Push five LARGE HIDDEN CAMS (5) into the
BRACES (E, F, and G) and BOTTOM (D).
å Fasten the BRACES (E, F, and G) and BOTTOM (D) to the
RIGHT END (A). Tighten five LARGE HIDDEN CAMS (5).
å NOTE: Be sure the WOOD DOWELS insert into the RIGHT
END.
Step 3
A
3
21
5
The arrow must
point toward the
edge of the board.
D
E
F
G
5
5
5
Page 7www.sauder.com420136

Step 4
5
5
B
å Push five LARGE HIDDEN CAMS (5) into the
BRACES (E, F, and G) and BOTTOM (D).
å Fasten the LEFT END (B) to the BRACES (E, F, and G) and
BOTTOM (D). Tighten five LARGE HIDDEN CAMS (5).
å NOTE: Be sure the WOOD DOWELS insert into the LEFT END.
E
F
G
D
3
21
5
The arrow must
point toward the
edge of the board.
Page 8 www.sauder.com 420136

å Push four LARGE HIDDEN CAMS (5) into the
ENDS (A and B).
å Fasten the TOP (C) to the ENDS (A and B). Tighten four
HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS insert into the TOP.
Step 5
5
3
21
5
The arrow must
point toward the
edge of the board.
These holes must be here.
C
Page 9www.sauder.com420136
(4 used)
A
B

å Fasten the TOP (C) to the FRONT TOP MOLDING (F). Use
two 1-3/16" FLAT HEAD SCREWS (11).
å Peel the GLIDES from the GLIDE CARD (10) and stick
them on the bottom of each leg of the ENDS (A and B).
Step 6
1 - 3/16" FLAT HEAD SCREW
(2 used in this step)
11
10
A
B
C
F
Page 10 www.sauder.com 420136