Sauder OfficeWorks AFFIRM 427428 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Share your journey!
How can we help you? To reach our customer service, visit sauder.com/commercial-oce/service
to chat with a live rep or email us.
Prefer the phone? Give us a ring at
877-996-7539 .
Our award-winning team is available Monday-Friday - 8:30 a.m. to 5 p.m. EST (except holidays).
Sauder.com
English pg 1-12
Français pg 13-14
Español pg 15-16
Lot # 573100 11/22/21
Purchased: __________________
Bowfront Executive
Desk 60"
Hudson Elm finish | Model 427428
AFFIRM COLLECTION

Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
3
4
8
5-12
13-14
15-16
17-18
19
427428 www.sauder.com/commercial-oce/servicePage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
C TOP (1)
D MODESTY PANEL (1)
A
B
C
D
427428www.sauder.com/commercial-oce/service Page 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
46E LEVELER - 4
10M TOUCH-UP PEN - 1 2P GROMMET - 2
3P GROMMET
CAP - 2 9P CORD CLIP - 2
42F WOOD DOWEL - 13
TWIST-LOCK®
FASTENER COVER - 15
125P HOLE
PLUG - 8
127P
427428 www.sauder.com/commercial-oce/servicePage 4

Optional Accessories (sold separately)
å This piece of furniture accommodates one or more of the following optional accessories (sold separately).
å Powered Grommet (Item 427829)
The Powered Grommet is designed to replace any existing grommet provided with your furniture.
å To purchase the Powered Grommet, scan this QR code. (Or go to sauder.com)
å Articulating Keyboard Shelf (Item 426468)
The Articulating Keyboard Shelf is designed to be fastened to the underside of your desk, desk return, or credenza top.
å To purchase the Articulating Keyboard Shelf, scan this QR code. (Or go to sauder.com)
å LED Light (Item 426494)
The LED Light is designed to be fastened to the underside of a hutch.
å To purchase the LED Light, scan this QR code. (Or go to sauder.com)
427428www.sauder.com/commercial-oce/service Page 5

Step 1 Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code. 0
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Insert four WOOD DOWELS (42F) into the MODESTY
PANEL (D) exactly as shown.
å NOTE: You may need to gently tap the WOOD DOWEL in
with your hammer.
42F
42F
D
427428 www.sauder.com/commercial-oce/servicePage 6

Step 2
å Using your hammer, gently tap four LEVELERS (46E)
completely into the holes in the ENDS (A and B).
å NOTE: Adjustments to the LEVELERS will be made later in
assembly once your unit is standing upright.
A
B
46E
427428www.sauder.com/commercial-oce/service Page 7

Hardware Usage Guide
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
2.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
1.
HOW TO USE A TWIST-LOCK®FASTENER
427428 www.sauder.com/commercial-oce/servicePage 8

Step 3
å Fasten the ENDS (A and B) to the MODESTY PANEL (D).
Tighten six TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the MODESTY
PANEL insert into the ENDS.
A
D
B
2
Surface with
TWIST-LOCK®
FASTENERS
Surface with TWIST-LOCK® FASTENERS
Surface without
TWIST-LOCK®
FASTENERS
For support, place packing
foam or books here.
Edge with TWIST-LOCK® FASTENERS
427428www.sauder.com/commercial-oce/service Page 9

Step 4
å Push two CORD CLIPS (9P) into the holes in the TOP (C).
å NOTE: The CORD CLIP is used to hold the cord against
the TOP.
C
9P
Pilot hole to be used
only if you purchased
the optional
426468 Articulating
Keyboard Shelf.
427428 www.sauder.com/commercial-oce/servicePage 10