Sauder 426932 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Sauder.com
Share your journey!
English pg 1-17
Français pg 18-20
Español pg 21-23
Lot # 542612 03/17/20
Purchased: __________________
Storage Cabinet
Model 426932
Treat yourshelf.

Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Table of Contents Assembly Tools Required
3
4
5-17
18-20
21-23
24-26
27
Hammer
Not actual size
Electric drill with 1/8" bit
(ONLY in indicated step)
Page 2 www.sauder.com/service 426932

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A LEFT END (1)
B RIGHT END (1)
C DOOR (2)
D BACK (1)
E FIXED SHELF (3)
F ADJUSTABLE SHELF (2)
G SKIRT (1)
A
B
C
DE
F
G
E
E
C
F
Page 3www.sauder.com/service426932

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
WOOD DOWEL -2
1METAL BRACKET - 4
2 3 HINGE - 4
SHELF PIN - 8
4NAIL - 40 5PULL - 2
6
7BUMPER CARD - 1 APPLIQUE CARD - 1
8FURNITURE TIPPING RESTRAINT KIT - 1 98
Page 4 www.sauder.com/service 426932
10 1-9/16" FLAT HEAD SCREW - 12
15/16" PAN HEAD SCREW - 4
11
1/2" FLAT HEAD SCREW - 32
9

Step 1 Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code. 0
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Fasten the ENDS (A and B) to the FIXED SHELVES (E).
Use twelve 1-9/16" FLAT HEAD SCREWS (10).
A
B
E
E
E
Surface with holes
Surface with holes
Unfinished edge
Unfinished edge
Unfinished edge
Unfinished edge
Page 5www.sauder.com/service426932
10
1-9/16" FLAT HEAD SCREW
(12 used in this step)
10
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Surface with holes

å Unfold the BACK (D) and lay it over your unit.
å Make equal margins along all four edges of the BACK (D). Push
on opposite corners of your unit if needed to make it "square".
å Fasten the BACK (D) to your unit using the NAILS (5). The NAILS
should be 4" apart and 1/4" in from the edges.
Step 2 8
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
4"
1/4"
D
NAIL
(40 used in this step)
5
Page 6 www.sauder.com/service 426932
Unfinished
surface

å Carefully turn your unit onto its back edges.
å Insert two WOOD DOWELS (1) into the ENDS (A and B).
Step 3
A
B
1
Page 7www.sauder.com/service426932
Some assembly
(and snacks) required.

å Fasten four METAL BRACKETS (2) to the SKIRT (G). Use
eight 1/2" FLAT HEAD SCREWS (9)
Step 4
G
Page 8 www.sauder.com/service 426932
2
2
9
2
9
1/2" FLAT HEAD SCREW
(8 used in this step)
9

å Fasten the SKIRT (G) to the ENDS (A and B).
å NOTE: Be sure the WOOD DOWELS in the ENDS insert
into the SKIRT.
Step 5
G
A
B
Page 9www.sauder.com/service426932

å Fasten the SKIRT (G) to the ENDS (A and B)
and FIXED SHELF (E). Use eight 1/2" FLAT
HEAD SCREWS (9).
Step 6
G
A
B
E
Page 10 www.sauder.com/service 426932
1/2" FLAT HEAD SCREW
(8 used in this step)
9
Now might be a
good time to refresh
your drink.