Sauder Parklane 419152 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 530468 06/21/19
Purchased: __________________
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Share your journey!
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-523-3987.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
WARNING
CHOKING HAZARD - Small Parts
Not for children under 3 years.
Adult assembly required.
4-Drawer Chest
Parklane Collection | Model 419152

Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Table of Contents Assembly Tools Required
Skip the power trip.
This time.
3
4
5-18
19-21
22-24
25-26
27
419152 www.sauder.com/servicePage 2
Hammer
Not actual size

åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Part Identification Now you know
our ABCs.
A2
B2
C3
D3
E2
F
K
K
H2
L
M64
D175
D257
D262
D981
419152www.sauder.com/service Page 3
A2 RIGHT END (1)
B2 LEFT END (1)
C3 TOP (1)
D3 DRAWER FRONT (4)
D175 DRAWER BACK (4)
D257 LEFT DRAWER SIDE (4) - 1 with label
D262 RIGHT DRAWER SIDE (4)
D981 DRAWER BOTTOM (4)
E2 BASE (1)
F BRACE (1)
H2 UPPER BACK (1)
K BACK (2)
L TOP MOLDING (1)
M64
DRAWER BRACE (4)
(Hidden part using recycled
material. Color may vary.)

åScrews are shown actual size. You may receive extra hardware with your unit.
Hardware Identification
35AA UNIVERSAL CABINET RAIL - 8 35AC DRAWER RIGHT - 4 35AD DRAWER LEFT - 4
FELT DISC CARD - 1
1M
BLACK 9/16" LARGE HEAD SCREW - 29
1S
SILVER 1-1/8" FLAT HEAD SCREW - 3
10S
HINGE - 2
16H
3S GOLD 5/16" FLAT HEAD SCREW - 32
METAL PIN - 2
1R
NAIL - 17
1N
HIDDEN CAM - 18
1F CAM DOWEL - 18 2F
30S BLACK 1-9/16" FLAT HEAD SCREW - 20
419152 www.sauder.com/servicePage 4
DRAWER FRONT
BRACKET - 4
9G
15S SILVER 5/8" MACHINE SCREW - 8
PULL - 4
2K
FURNITURE TIPPING RESTRAINT KIT - 1
97

Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
Step 1
å Assemble your unit on a carpeted floor or on the empty carton to
avoid scratching your unit or the floor.
å Push eighteen HIDDEN CAMS (1F) into the ENDS (A2 and B2),
BRACE (F), BACKS (K), and DRAWER BRACES (M64). Then, insert
the metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
419152www.sauder.com/service Page 5
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Arrow
1F
2F
(18 used)
Do not tighten the HIDDEN CAMS in this step.
A2
B2
F
M64 x 4
Kx 2

Step 2
419152 www.sauder.com/servicePage 6
å Fasten the UNIVERSAL CABINET RAILS* (35AA) to the
ENDS (A2 and B2). Use sixteen GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
å *patent pending glide system
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
3S
Glide end
3
2
1
1
2
31
2
31
2
31
2
3
Glide end
VIEW THE DRAWER GLIDE VIDEO
Finished edge
Finished edge
3
3
3
2
2
2
1
1
1
Remember:
Righty tighty.
Lefty loosey.
A2
B2
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Edge with
HIDDEN CAMS

Step 3
419152www.sauder.com/service Page 7
å Open the FURNITURE TIPPING RESTRAINT KIT (97) and fasten
the SAFETY STRAP to the TOP (C3). Use the provided BLACK
9/16" LARGE HEAD SCREW.
å NOTE: Position the SAFETY STRAP exactly as shown.
C3
These holes must be here.
BLACK 9/16" LARGE HEAD SCREW
(1 used in this step)
Safety strap
97

å Fasten the TOP (C3) to the LEFT END (B2). Tighten two
HIDDEN CAMS.
Step 4
419152 www.sauder.com/servicePage 8
C3
B2
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
Finished edge
These edges must be even.
Surface with holes
Surface with
HIDDEN CAMS
Do not stand the unit upright without the
BACK (H2) fastened. The unit may collapse.
Caution

Step 5
419152www.sauder.com/service Page 9
å Fasten the BACKS (K) to the LEFT END (B2). Tighten four
HIDDEN CAMS. Arrow
Minimum
190 degrees
Maximum
210 degrees
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
These holes must be here.
B2
K
K

å Insert one METAL PIN (1R) into the LEFT END (B2).
å Fasten the BRACE (F) to the LEFT END (B2). Tighten the
HIDDEN CAM.
å NOTE: Be sure the METAL PIN in the END inserts into the hole
in the BRACE.
å Insert one METAL PIN (1R) into the short edge of the BRACE (F).
Step 6
419152 www.sauder.com/servicePage 10
F
1R
1R
B2
Surface with HIDDEN CAMS
Arrow
Minimum
190 degrees
Maximum
210 degrees