Sauder 415546 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
It'd be impolite if you
didn't yawn.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-18
Français p 19-20
Español p 21-22
Lot # 372911 05/21/15
Purchased: __________________
Be sure to ive us a rin before
makin any returns. 1-800-523-3987
Twin Platform Bed
Beinnins Collection | 415546

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
Part Identification
A2 HEADBOARD (1)
B2 FOOTBOARD (1)
C PLATFORM (3)
D2 LEG (6)
D16 RIGHT DRAWER SIDE (2)
D17 LEFT DRAWER SIDE (2)
D219 DRAWER BACK (2)
D987 DRAWER BOTTOM (2)
E2 DRAWER FRONT (2)
F LARGE SUPPORT (2)
G DRAWER BRACE (4)
K2 SUPPORT (6)
L SMALL SUPPORT (4)
N RAIL (4)
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Warranty
3
4
5-18
19-20
21-22
23
415546 www.sauder.com/servicesPae 2

åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
Part Identification
C
C
C
F
F
G
G
G
G
L
L
L
L
N
N
N
N
A2
B2
D2
D2
D2
D2
D2
D2
E2
E2
K2
K2
K2
K2
K2
K2
D987
D987
D219
D219
D17
D17
D16
D16
415546www.sauder.com/services Pae 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
BLACK 9/16" PAN HEAD SCREW - 16
25S
METAL BRACKET - 2
4G
BLACK 9/16" LARGE HEAD SCREW - 4
1S SILVER 1-1/8" FLAT HEAD SCREW - 80 10S
WASHER - 16
10I
BROWN 1-1/2" FLAT HEAD SCREW - 8
14S
11M SWIVEL ROLLER - 8
CAM SCREW - 4
8F
HIDDEN CAM - 4
1F
PULL - 4
45K
SILVER 7/8" MACHINE SCREW - 8
24S
BLACK 1-15/16" FLAT HEAD SCREW - 16
113S
30S BLACK 1-9/16" FLAT HEAD SCREW - 12
415546 www.sauder.com/servicesPae 4

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Push four HIDDEN CAMS (1F) into the DRAWER BRACES (G).
å Turn four CAM SCREWS (8F) into the DRAWER FRONTS (E2).
8F
Arrow
Arrow
1F
The arrow in the HIDDEN
CAM must point toward the
hole in the ede of the board.
Hole
G
G
G
G
E2
E2
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1146
to watch a video on how to assemble your unit.
415546www.sauder.com/services Pae 5

Step 2
å Fasten the RAILS (N) to the LEGS (D2). Use twenty-four
SILVER 1-1/8" FLAT HEAD SCREWS (10S) throuh the
larer holes in the RAILS (N).
Short finished ede
Short finished ede
Short finished ede
D2
D2
D2
Use the
lare holes
Use the
lare holes
Unfinished surface Unfinished surface
Short unfinished ede
Short unfinished ede
Short unfinished ede
All LEGS (D2) should have the
surface with holes facing up.
D2
D2
D2
Use the
lare holes
Use the
lare holes
Unfinished surface Unfinished surface
SILVER 1-1/8" FLAT HEAD SCREW
(24 used in this step)
10S
N
N
N
N
415546 www.sauder.com/servicesPae 6

Step 3
å Fasten the SMALL SUPPORTS (L) to the RAILS (N). Use
sixteen SILVER 1-1/8" FLAT HEAD SCREWS (10S).
L
L
L
L
N
N
N
N
This hole must be here.
This hole must be here.
This hole must be here.
This hole must be here.
SILVER 1-1/8" FLAT HEAD SCREW
(16 used in this step)
10S
415546www.sauder.com/services Pae 7

å Fasten the SUPPORTS (K2) to the HEADBOARD (A2) and
FOOTBOARD (B2). Use sixteen SILVER 1-1/8" FLAT
HEAD SCREWS (10S).
Step 4
Ede with holes
Unfinished surface
Unfinished
surface
K2
K2
B2
A2
Lon finished ede
SILVER 1-1/8" FLAT HEAD SCREW
(16 used in this step)
10S
415546 www.sauder.com/servicesPae 8

å Fasten the SUPPORTS (K2) to the LARGE SUPPORTS (F).
Use eiht SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Step 5
Ede with holes
Ede with holes
SILVER 1-1/8" FLAT HEAD SCREW
(8 used in this step)
10S
K2
K2
F
F
415546www.sauder.com/services Pae 9

å Fasten the remainin two SUPPORTS (K2) to the
SUPPORTS (K2). Use eiht BLACK 1-15/16" FLAT HEAD
SCREWS (113S).
Step 6
K2
K2
K2
K2
F
F
BLACK 1-15/16" FLAT HEAD SCREW
(8 used in this step)
113S
Ede with holes
Ede with holes
415546 www.sauder.com/servicesPae 10