Sauder WHISKER CAT PYRAMID User manual

If you have assembly questions or need a replacement part, please contact Sauder directly at
www.sauder.com or 800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
WHISKER CAT PYRAMID
[e-mail] | 1.877.250.7729 | Mon-Fri, 9am-5:30pm EST

REGISTER YOUR NEW
PRODUCT ONLINE
For immediate service,
our website is available 24
hours per day, 7 days per
week, to order replacement
parts, access assembly tips,
register your product and
view Sauder products.
www.sauder.com/service
Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
THANK YOU FOR PURCHASING THE WHISKER CAT PYRAMID!
I am thrilled that Whisker and Sauder furniture have partnered
together to bring you the highest-quality pet furniture. At
Whisker, we design and deliver refined pet accessories that
delight both pets and people. Whisker and Sauder products
are made with environmentally responsible materials and
world-class manufacturing processes. Together, our companies
are bringing pet parents a premium line of stylish yet functional
pet furniture that is built to last. Enjoy!
Jacob Zuppke, President & CEO of Whisker
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
3
4
5-13
14-15
16-17
18
19
427330 whiskersupport.com Page 2
Electric drill with 1/8"
or 3/8" bit
(ONLY in indicated step)

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge to
help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
427330whiskersupport.com Page 3
B H-BRACE (1)
C SHORT BRACE (2)
D BOTTOM FRAME (2)
E LONG BRACE (1)
G TOP (1)
H UPPER SHELF (1)
J LOWER SHELF (1)
K BOTTOM (1)
L TOP FRAME (2)
M TOP BRACE (1)
L
J
G
D
K
C
H
B
M
E
L
C
D

åScrews are shown actual size. You may receive extra hardware with your unit.
Hardware Identification
1/2" HEX HEAD SCREW - 26
3
L-WRENCH - 1
2
LEVELER - 4
1
FURNITURE TIPPING
RESTRAINT KIT - 1
96
WRENCH - 1
5
1-3/16" HEX HEAD SCREW - 18
4
427330 whiskersupport.com Page 4

Step 1
View our assembly video at
www.whisker.com/support
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Place the BRACES (B and C) between the TOP FRAMES (L)
as shown.
å Fasten the BRACES (B and C) to the TOP FRAMES (L).
Tighten sixteen 1/2" HEX HEAD SCREWS (3) using the
L-WRENCH (2).
L
C
B
LC
2
L
C
B
L
C
1/2" HEX HEAD SCREW
(16 used in this step)
3
427330whiskersupport.com Page 5

Step 2
å NOTE: Pay close attention to the position of
the BOTTOM FRAMES (D) in this step.
å Insert the BOTTOM FRAMES (D) into the TOP
FRAMES (L) as shown.
L
L
D
D
Correct angle Incorrect angle
Correct angle Incorrect angle
427330 whiskersupport.com Page 6
Thinking outside
the litter box.

Step 3
å Fasten the BOTTOM FRAMES (D) to the TOP
FRAMES (L). Tighten eight 1/2" HEX HEAD
SCREWS (3) using the L-WRENCH (2).
L
L
D
D
2
427330whiskersupport.com Page 7
1/2" HEX HEAD SCREW
(8 used in this step)
3

Step 4
å Fasten the LONG BRACE (E) to the BOTTOM
FRAMES (D). Tighten two 1-3/16" HEX HEAD
SCREWS (4) using the L-WRENCH (2).
2
D
D
E
1-3/16" HEX HEAD SCREW
(2 used in this step)
4
427330 whiskersupport.com Page 8

Step 5
å Fasten the TOP BRACE (M) to the TOP FRAMES (L).
Tighten two 1/2" HEX HEAD SCREWS (3) using the
L-WRENCH (2).
å Turn the LEVELERS (1) into the bottoms of the
BOTTOM BRACES (D) using the WRENCH (5).
5
2
M
L
L
1
D
D
427330whiskersupport.com Page 9
1/2" HEX HEAD SCREW
(2 used in this step)
3

Step 6
å Fasten the TOP (G) to the H-BRACE (B). Tighten
four 1-3/16" HEX HEAD SCREWS (4) using the
L-WRENCH (2).
å Fasten the UPPER SHELF (H) to the SHORT
BRACES (C). Tighten four 1-3/16" HEX HEAD
SCREWS (4) using the L-WRENCH (2).
å Fasten the LOWER SHELF (J) and BOTTOM (K) to
the BOTTOM FRAMES (D). Tighten eight 1-3/16"
HEX HEAD SCREWS (4) using the L-WRENCH (2).
2
This hole
must be here.
D
DK
J
C
H
C
G
The large holes
should be opposite
of each other.
B
427330 whiskersupport.com Page 10
Go on, spoil 'em a little.
1-3/16" HEX HEAD SCREW
(16 used in this step)
4