Sauder Shoal Creek 420272 User manual

Elise Display Cabinet
Shoal Creek Collection | 420272
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-445-1527.
Share your journey!
sauder.com
Store behind
closed doors.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-12
Français pg 13-14
Español pg 15-16
Lot #: 394248
Date Purchased: __________________
07/08/16
Be sure to give us a ring before
making any returns. 1-800-445-1527

Table of Contents Assembly Tools Required
3
4
5-12
13-14
15-16
17-18
19
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
Page 2 www.sauder.com 420272

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
1 TOP (1)
2 RIGHT END (1)
3 LEFT END (1)
4 SHELF (1)
5 BOTTOM (1)
6 MOLDING (1)
7 BACK (2)
8 RIGHT DOOR (1)
9 LEFT DOOR (1)
Now you know
our ABCs.
Page 3
www.sauder.com420272
2
7
7
4
5
3
6
9
8
1

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
Page 4 www.sauder.com 420272
CAM SCREW - 14
AWOOD DOWEL - 16 C
MAGNETIC CATCH - 2
D F HINGE - 4
STRIKEPLATE - 2
G
1/2" SCREW - 27
J
3/4" SCREW - 2
I
HIDDEN CAM - 14
B
9/16" BLACK SCREW - 6
E
KNOB - 2
H
9/16" SILVER SCREW - 16
L

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Turn eight CAM SCREWS (A) into the ENDS (2 and 3).
å Insert eight WOOD DOWELS (C) into the ENDS (2 and 3).
Page 5
www.sauder.com420272
C
A
(8 used)
(8 used)
2
3

Step 2
å Turn six CAM SCREWS (A) into the TOP (1) and MOLDING (6).
å Insert eight WOOD DOWELS (C) into the TOP (1) and MOLDING (6).
å Insert two HIDDEN CAMS (B) into the BOTTOM (5).
å Fasten the MOLDING (6) to the BOTTOM (5). Tighten two
HIDDEN CAMS.
å Fasten the MAGNETIC CATCHES (D) to the TOP (1). Use
four 9/16" BLACK SCREWS (E).
Page 6 www.sauder.com 420272
3
21
B
The arrow must
point toward the
edge of the board.
C
A
(6 used)
(8 used)
6
5
1
B
D
E
6
9/16" BLACK SCREW
(4 used in this step)
E

å Insert four HIDDEN CAMS (B) into the SHELF (4)
and BOTTOM (5).
å Fasten the RIGHT END (2) to the SHELF (4) and
BOTTOM (5). Tighten four HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the RIGHT END
insert into the SHELF and BOTTOM.
Step 3
Page 7
www.sauder.com420272
3
21
B
The arrow must
point toward the
edge of the board.
5
4
2
B
B

Step 4
å Insert four HIDDEN CAMS (B) into the SHELF (4)
and BOTTOM (5).
å Fasten the LEFT END (3) to the SHELF (4) and BOTTOM (5).
Tighten four HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the LEFT END and
MOLDING insert into the holes.
Page 8 www.sauder.com 420272
3
21
B
The arrow must
point toward the
edge of the board.
5
4
3
B
B

Step 5
Page 9
www.sauder.com420272
å Carefully stand your unit upright.
å Insert four HIDDEN CAMS (B) into the ENDS (2 and 3).
å Fasten the TOP (1) to the ENDS (2 and 3). Tighten four
HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the TOP insert into
the holes in the edges of the ENDS.
B
B
1
3
2
3
21
B
The arrow must
point toward the
edge of the board.
Flat edge

Step 6
å Fasten the HINGES (F) to the ENDS (2 and 3). Use
eight 9/16" SILVER SCREWS (L).
å Fasten the DOORS (8 and 9) to the HINGES (F). Use
eight 9/16" SILVER SCREWS (L).
å Fasten the KNOBS (H) to the DOORS (8 and 9). Use
two 3/4" SCREWS (I).
å Fasten the STRIKE PLATES (G) to the DOORS (8 and 9).
Use two 9/16" BLACK SCREWS (E).
Page 10 www.sauder.com 420272
3
2
9
8
G
E
8
I
H
L
F
3/4" SCREW
(2 used for the KNOBS)
I
9/16" SILVER SCREW
(16 used for the HINGES
L
9/16" BLACK SCREW
(2 used for the STRIKE PLATES
E