SCAN 1006-B User guide

1006-B
ASSEMBLY AND INSTRUCTION MANUAL SCAN 1006-B
EU - ASSEMBLY AND INSTRUCTIONS MANUAL
SCAN 1006-B
EU SCAN

1006-B
2
EU SCAN
SCAN 1006-B
You have purchased a product by one of Europe’s leading manufacturers of
wood-burning stoves, and we are sure that you will have years of pleasure from your
purchase.
To make the best possible use of your stove, it is important that you
follow our advice and instructions. Read through this Assembly and Instruction
Manual carefully before you start to assemble your stove.
CONGRATULATIONS
ON YOUR NEW SCAN
WOOD-BURNING STOVE

3
CONTENTS
¬¬ TECHNICAL DATA 4
Installation 4
Safety 4
Technical data and dimensions 5
Dimension sketch and minimum distances 6
Type plate 8
Product registrationumber 8
¬¬ ASSEMBLY 9
Tools needed for mounting of the stove 9
Loose parts 9
Disposal of packaging 9
Additional accessories 10
Load-bearing foundation 11
Floor plate 11
Existing chimney and pre-fabricated element chimney 11
Connection between stove and steel chimney 11
Requirements for chimney 11
Storage of flammable material 12
Carrying capacity 12
Safety distance 13
Operating the door 14
Fitting the flue connection piece 14
Fresh air intake 15
Closed combustion system 15
Mounting of external air supply 15
Mounting with plinth 18
Wall-hung model 19
Dimensional drawings of the wall brackets 19
Mounting of the wall bracket 20
Mounting of combustion chamber 22
Adjustment of the door 24
Door (Self-closing) 24
¬¬ INSTRUCTIONS FOR USE 25
CB-technology (Clean Burn) 25
Baffle plate 25
Primary air 25
Secondary air 25
¬¬ INSTRUCTIONS FOR HEATING 26
Environmentally friendly operation 26
Lighting 26
Continuous operation 27
Warning about over-firing 27
Using the stove in various weather conditions 27
Firing in the spring or autumn 27
General notes 27
The function of the chimney 28
Chimney fire 28
¬¬ HANDLING OF THE FUEL 29
Selecting wood/fuel 29
Preparation 29
Storing 29
Moisture 29
Use of the following as fuel is illegal 29
Calorific value of the wood 29
¬¬ MAINTAINANCE 30
Sweeping the chimney and cleaning the stove 30
Checking the stove 30
Servicing 30
Combustion chamber lining 30
Gaskets 30
Painted surfaces 30
Cleaning the glass 31
Baffle plates and combustion chamber lining 31
Disposal of stove parts 31
¬¬ TROUBLESHOOTING 32
¬¬ WARRANTY 33

4
YOU GET THE BEST USE OF
THE STOVE BY USING
A TOP-DOWN
LIGHTING METHOD
SEE
"INSTRUCTIONS FOR HEATING"
PLEASE NOTE!
TECHNICAL DATA
INSTALLATION
To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Your Scan
Dealer will be able to recommend a qualified fitter in your area. For information on Scan Dealers, please go to
www.scan-stoves.com.
¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building
regulations as well as the information provided in this Assembly and Instruction Manual
¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition you are
obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning
SAFETY
Any changes made to the product by the dealer, fitter or user could result in the product and safety functions not functioning as
intended. The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case
if parts that are necessary for the operation and safety of the stove are dismantled or removed.
WARNING!
This product contains very strong magnets.
¬ When separating and putting together the magnets, we recommend that you let them glide on (or from) one another. In this way
you avoid squeezing your fingers and damaging the coating of the magnets
¬ Electronic components should be kept at a safe distance from the magnets to avoid them being influenced or damaged by
the magnetic field (pacemakers, hearing aids, computers, watches, measuring instruments, floppy discs, credit cards, mobile
phones etc.)

5
TECHNICAL DATA AND DIMENSIONS
Materials
Steel plate
Galvanised sheet
Ceramic stone/vermiculite
Chamotte
Robax glass
Scan 1006-B – Test in compliance with EN 13240
Combustion chamber Ceramic
stone
Vermi-
culite
CO Emission at 13% O20,07 0,07 %
CO Emission at 13% O2887 905 mg/Nm3
Dust @ 13% O219 18 mg/Nm3
Nox@ 13% O295 95 mg/Nm3
Efficiency 82 82 %
Energy efficiency index 109 109
Energy efficiency class A+ A+
Nominel output 6 7 kW
Chimney temperature
EN 13240 227 224 °C
Temperature in flue conn.
piece 272 269 °C
Amount of smoke 5,6 6,6 g/sec
Sub-pressure EN 13240 12 12 Pa
Recommended sub-pressure
in connecting piece 18-20 18-20 Pa
Required combustion air supply 17 21 m3/h
Fuel Wood Wood
Fuel consumption 1,9 2,2 kg/h
Amount of fuel required to light 1,5 1,8 kg
Amount of fuel, max. 2,5 3 kg
* Intermittent operation in this context means normal use of
a wood-burning stove. In other words, you should let the fire
die down until only the embers are left before refuelling.
Scan 1006-B is produced in accordance with type
approval for the product, which also covers the product’s
Assembly and Instruction Manual.
The Declaration of Performance (DoP) is available from
www.scan.dk
Surface treatment Senotherm
Max. wood length Scan 1006-B 65 cm
Weight Scan 1006-B (Ceramic stone) ca. 163 kg
Weight Scan 1006-B (Vermiculite) ca. 147 kg
Weight big box ca. 41 kg
Connecting piece internal diameter 144 mm
Connecting piece external diameter 148 mm
Approval type Intermittent
fuelling*
EN 13240 was carried out on the installation shown on page 7.