Schlage S-7800 User manual

USER MANUAL
Notice
Please read this manual before installation and operation
S-7800
DIGITAL PUSH-PULL
DOOR LOCK
WITH FINGERPRINT READER

Safety precautions
Safety Precautions
Do not disassemble or alter the lock. Disassembling the door
lock may damage the product. Damage to the product caused by
unauthorised persons may void the warranty.
Please keep the product away from water or any liquids. If the
product is exposed to water or liquids, please wipe the moisture
off with a soft cloth. If moisture or foreign materials penetrate the
product, remove the batteries immediately.
Please check the batteries every 6 months for leaks/cleanliness. If
leakage is discovered, please wipe out with a dry cloth and replace
with new batteries. In case of exposure to leakage, wash affected
skin area with soap and water immediately.
Do not clean the product with ammable materials such as alcohol,
benzene or thinners. Such materials may damage the surface of the
lock or cause a re.
Batteries should not be exposed directly to heat sources or
submerged in water, because they may leak or explode, resulting in
severe damage. Do not use damaged batteries.
Do not allow the battery electrodes to make contact with metals
such as keys, as the battery may overheat, causing an explosion or
severe damage.
Please do not close the door with the deadbolt in the locked
position. It may damage the product or cause a malfunction.
Do not mix old and new batteries, or use different types of
batteries. Ensure the + and - ends of the batteries are positioned
correctly. Incorrect positioning may cause leaks and/or an explosion.

Contents
Product features ....................................................................... 04
Product composition and components .................................... 06
Overview.................................................................................... 08
Description shortcut icons..........................................................10
How to replace batteries............................................................10
How to apply external power in an emergency ....................... 10
How to use mechanical override key .........................................10
How to use random security coding function ...........................10
How to unlock/lock from outside...............................................11
How to set auto-locking/manual-locking ................................. 11
Selecting a language ..................................................................11
How to unlock/lock from inside................................................. 11
How to set double-locking function...........................................12
Safety handle function................................................................12
Auto-locking function/Auto-relocking function ........................ 12
How to select normal mode/safety mode ................................ 13
How to register/delete PIN codes in normal mode...................13
How to register/delete cards/fobs in normal mode ..................13
How to register/delete ngerprints in normal mode.................13
How to register/delete PIN codes in safety mode ................... 14
How to register/delete cards/fobs in safety mode................... 14
How to register/delete ngerprints in safety mode ..................14
Entering manager PIN code in safety mode..............................14
Entering manager cards/fobs in safety mode............................14
Deleting manager card s/ fobs in safety mode.......................... 14
How to control voice guide volume.......................................... 15
Guest PIN codes (temporary use) ..............................................15
How to control operation volume..............................................15
Status checking guide ................................................................15
Check battery capacity ............................................................... 15
Safety handle function................................................................15
Warning alarm function - hacking .............................................. 15
Warning alarm function - trespass by force............................... 15
How to install communication pack ...........................................16
How to register/delete remote key............................................ 16
Ⅰ. Before using
Ⅱ. Basic functions
Ⅲ. Normal Mode
and Safety Mode
Ⅳ. Applications

Ⅰ. Before using
4
Product features
Convenient push pull handle conversion
Direction of lever may be adjusted according to door opening direction.
Smart auto safety handle
Operation of the handle is restricted to provide higher security level.
Non-handed
The product can be installed in a left or right handed configuration.
Automatic/manual locking modes
Either automatic or manual locking modes can be selected.
Auto-relock function
If users do not open the door after unlocking the device it will lock itself
automatically.
Double lock function
When double lock function is activated, the door cannot be opened
from the outside, even with the registered card, PIN code or fingerprint.
Override key can still be used.
Mute function
Door will not emit any sound when mute is activated.
Battery level indicator and alarm for battery replacement
Easy to check battery status with three step level indicator and alarm
when battery replacement is required.
Trespass alarm function
When the door is opened by force an alarm will sound.

Ⅰ. Before using
5
Prevent trespass and hacking
After multiple incorrect attempted entries an alarm will sound and
all the functions of the lock will be suspended for three minutes. The
alarm activates after three incorrect PIN/card entries and five incorrect
fingerprint entries.
Random security coding
When you enter your home with other people, you may not want to
show your PIN code to them. In this case, you may press any numbers
randomly and then enter your PIN code at the end and you will still gain
access.
Normal mode/safety mode
Normal mode is ideal for new users or low security environments
Safety mode provides a higher security level via use of a manager
PIN code. Allows individual register and delete function which is not
provided in normal mode.
Option function
Used for changing optional functions:
1. Register and setting for RF connection option
2. Change of language

Ⅰ. Before using
6
Product composition and components
Remote key
Part # RP-10
(Optional)
Communication pack
Part # RXP-10
(Optional)
Screws
CARD FOB
1
6
9
10
7
11
12
14 15
8
13
2 3 4 5
PATCH

Ⅰ. Before using
7
Name Product specification Notes
1Front assembly 88mm(W) X 396mm(H) X 40mm(D) Including rubber pad
2Back assembly 83.7mm(W) X 373mm(H) X 38.7mm(D)
3Back cover 88mm(W) X 381mm(H) X 8.7mm(D) Including rubber pad
4Mortice lock 105.4mm(W) X 240mm(H) X 24mm(D
)
5Strike
24mm(W) X 240mm(H) X 4.5mm(D)
6Card key
2 x card, 2 x fob key, 2 x patch
7Mechanical key Mechanical key x 3
8Battery 8 x 1.5V 'AA' alkaline
9Handle shaft 70.5mm(W) X 8mm(H) X 8mm(D) 40-50mm door
10 Handle shaft (M) 101.7mm(W) X 8mm(H) X 8mm(D) 70-90mm door
11
Handle shaft clip 2 of
12 Key tail plate 1 of
13 Screws 1 set
14 Communication pack Communication pack
Optional
15 Remote key Remote key Optional
Note: door thickness range is 40mm-90mm
Factory settings
Item Setting status Ref. page
Auto/Manual lock mode [Auto-lock] 11
Language (English/Chinese) English 11
Normal mode/security mode Normal mode 13
Voice guide volume (1-3 level) 3 level [Maximum] 15
Beep volume level (1-8 level) 8 level 15
Handle direction (push/pull) Front cabinet - pull/back cabinet - push

Ⅰ. Before using
8
Overview
Fingerprint sensor
Touch the registered
fingerprint on sensor, and then
open the door
Card key touch plate
Touch the registered card
key to open the door.
Lock/unlock lamp
Indicates lock/unlock status
Handle
You can open the door by
pushing or pulling it after
unlocking
Status indicator
Indicates operation status
and checking battery
Touch type
numeric pad
Emergency cover
Function icon
Mute function
Safety handle
Battery replacement indicator
Trespass alarm function
Wireless interlock
Card keys
(Card, fob, patch)
Mechanical keys
External emergency power supply terminal
When batteries are flat lock may be operated and
unlocked by contacting 9V battery on terminals.
Emergency key cylinder
Door may be opened by mechanical key.
Emergency cover (external emergency power supply terminal and emergency key cylinder)
1. Front assembly
CARD FOB
PATCH

Ⅰ. Before using
9
2. Back Assembly
Battery cover
Push up to open the
battery cover
[ N ] button
Registration/deletion of code,
card, fingerprint in normal mode
[ S ] button
Registration/deletion of code,
card, fingerprint in safety mode
Indicator lamp to set
the safety handle
LED indicator (locking status)
Handle
Cover
Auto/Manual mode switch
A : Auto mode
M : Manual mode
[Option] button
To register or delete optional
RF communication module
[Manual locking] button
Button to lock the door manually
[Double lock function] button
Button to set double locking mode
Safety handle jog button
(Refer to explanation below)
Manual safety
handle switch
To release safety handle
function manually when safety
handle jog button is out of
order or battery has died
How to set the safety handle function
Hold down [CLOSE] for 5 seconds
The safety handle function is set
Hold up [OPEN] for 3 seconds
When the lock is in
push mode please
do not put your fingers
between the lever and the
door lock body as this may cause
injury.
Caution
The safety handle function is temporarily cancelled

Ⅰ. Before using
10
Shortcut icons
How to apply external power in an emergency
How to use mechanical override key
How to use random security coding function
External power in an emergency
PIN
code CCard key
Mechanical override key
Open the
cover
Push or pull the handle
and open the door
How to use random security coding function
RAN
DOM
CODE C
How to replace batteries
If battery lamp is flickering RED and alarm sounds, open battery cover
and replace all 8 batteries (1.5V 'AA' size LR6 alkaline)
: [N] button : [S] button : [Option] button
: Press [ ] #: Press [#] : Touch the front pad
C: PIN code : Card key : Fingerprint
UC : User code MC : Manager code RC : Registration code
: Trespass alarm : Unlock : Lock
• Normal mode : [N] button/Safety mode : [S] button

Ⅱ. Basic function
11
How to unlock/to lock from outside
How to unlock from outside
PIN code CCard key
How to unlock from outdoor (mute function)
PIN code
OFF C
Card key
OFF
How to lock from outside
Auto-locking
mode
Manual-
locking mode
0
How to set auto-locking/manual-locking
Auto-locking
mode
In auto-locking mode, door will be locked automatically after closing.
Manual-
locking mode
In manual-locking mode, door will be locked by pressing manual lock
button after closing.
How to select the language
English 3Cor #1
Chinese 3Cor #2
1. Auto-locking mode
When the door is closed,
door is locked with beep
sound automatically.
2. Manual-locking mode
Setting manual-mode Press manual lock button,
then door is locked
How to unlock/lock from inside
Push lever
from inside

Ⅱ. Basic function
12
Safety handle function
Set-up
Set-up
Cancel
Cancel
The safety handle function may be set up from both outside and inside, and is
automatically cancelled when the registered PIN code or card is validated from
the outside. Safety handle function can only be cancelled temporarily from inside.
C8
Touch the
front pad
Touch the
front pad
Touch the
front pad
Card key
#
[#] Button
[ ] Button
#
[#] Button
[ ] Button
[8] ButtonPIN code
PIN code
or
If the door opened and closed
again within seven seconds, safety
handle is activated
[Method 2] Temporary release[Method 1] Emergency release
Push to the right [manual safety
handle switch]
C
Card key
1. How to set the safety handle function from outside
2. How to set the safety handle function from inside/ how to release
1. Auto-locking function 2. Auto-relocking function
How to set double locking function
Auto-locking function/auto-relocking function
CancelSet-up
Press [double lock] button for 3 second Press [manual-locking] button
When the door is closed,
it will be locked automatically.
If the door is not opened within seven seconds
after the PIN code, card key or ngerprint is
validated, it will be re-locked automatically.
Hold in [OPEN] position by pulling
up jog button for three seconds. Safety
handle will be released temporarily
Hold in [CLOSE] position by pulling down
jog button for five seconds

Ⅲ. Normal Mode & Safety Mode
13
PIN code: 10 entries (6-12 digits) | Card key: 20 entries | Fingerprint: 100 entries
: [N] Button : [S] Button UC : User code MC : Manager code
RC : Registration Code : Card key : Fingerprint
How to change from safety mode to normal mode
1 2 3 4 5 6 7 8 9 10
Normal mode
3"sec MC #UC #UC #
How to change from normal mode to safety mode
Safety mode
3"sec UC #MC #MC #
Normal mode
Normal mode
1 2 3 4 5 6 7 8 9 10
REG.
PIN
code 1 4 RC . . .
Card
key 1 5 . . .
Finger
print 1 6
DEL.
All
Card key 2 5
All
2 6
• Repeat highlighted part of diagram above for continuous register or delete
How to change normal mode/safety mode
• Normal mode: ideal for new users or low security environments
• Safety mode: higher security level via use of a manager PIN code. Provides
individual register and delete function

Ⅲ. Normal Mode & Safety Mode
14
Safety mode
PIN code: 10 entries (6-12 digits) | Card key: 20 entries | Fingerprint: 100 entries
: [N] Button : [S] Button UC : User code MC : Manager code
RC : Registration code : Card key
Safety mode
1 2 3 4 5 6 7 8 9 10 11 12
REG.
PIN code 1 4 MCor #RC
Card key 1 5 MCor #
Card
registration
number(2digits)
#
Finger
print 1 6 MCor #
Fingerprint
registration
number(3 digits)
3 times
#
DEL.
All card
key 2 5 MCor #
Individual
card key 3 5 MCor #
Card
registration
number(2digits)
#
All
fingerprint
2 6 MCor #
Individual
fingerprint
3 6 MCor #
Fingerprint
registration
number(3 digits)
#
Safety mode (manager)
Change Manager
code
8 4 MCor #RC #RC #
REG.
Manager
card key
8 5 MCor #
DEL.
All
manager
card key
8 6 MCor #5
• Repeat highlighted part for continuous register or delete

Ⅳ. Applications
15
How to control voice guide volume
Min.
volume
#Cor #1
1
Mid.
volume 2
Max.
volume 3
Guest PIN code (temporary use)
REG. #Cor #2RC #RC #
How to control operation volume
Vol.
up #Cor # 3 7
Vol.
down 9
Status checking guide
Voice
guide #Cor #4
Check battery capacity
Voice
guide #Cor #5
Safety handle function
Set up #Cor #8
Warning function against hacking
Operate Wrong PIN code three times/unregistered card three times/
unregistered ngerprint ve times
Warning alarm function against trespass by force
PIN code C
Card
key C
Additional functions

Ⅳ. Applications
16
Communication pack /remote key
1. How to install the communication pack
2. How to register remote key and to unlock/to lock
Communication pack
• One round battery (CR1620)
is supplied
• To replace battery open the
back cover with screwdriver
1. Open the battery cover then remove the
batteries.
2. Install the wireless communication pack on the
connected terminal.
3. Insert the batteries after confirming the
direction of and .
Battery
: [Option] button : Remote unlock : Remote lock
To register/to delete remote key (communication pack)
REG. Remote
key 1Cor #or
DEL. All
remote key 2Cor #
To lock/to unlock by remote key
Unlock Lock
• Repeat highlighted part for continuous register or delete
Portable remote key
LED
[lock] button
[unlock] button
optional
Installing
communication pack

MEMO

Allegion (Australia) Pty Ltd
Phone [phone]
www.allegion.com.au
Allegion (New Zealand) Limited
Phone [phone]
www.allegion.co.nz
Allegion (Southeast Asia) Pte. Ltd
Phone [phone]
www.allegion.com
S-7800 USER MANUAL 04/18