Sealey AP1210 User manual

STEEL WORKBENCHES WITH WOODEN TOP
MODEL NO: AP1210 & AP1535 (1.2 M, 1.53 M)
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
9Locate bench in a suitable working area.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
9Keep the bench clean and tidy in accordance with good workshop practice.
9Keep children and unauthorised persons away from the working area.
8DO NOT use the bench for any purpose other than that for which it is designed.
8DO NOT use in damp work areas.
8DO NOT undertake work on the bench without the workpiece being adequately secured. Use clamps or a vice (not included) to secure the
workpiece. Available from your Sealey dealer.
WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied
by the operator.
2. INTRODUCTION
Fully painted steel frame with wooden worktop and shelf. No nuts and bolts, means no tools required to assemble. Workbench clips
together in minutes. Available in two sizes.
3. SPECIFICATION
4. CONTENTS
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
Wear safety
footwear
Model No: AP1210 AP1535
Overall Size (W x D x H): 1210 x 610 x 900mm 1535 x 620 x 920mm
Maximum Capacity / Shelf: 100kg 200kg
Item Description AP1210 AP1535
1 Support Rack AP1210.01 AP1535.01
2 Cross Rail (Short) AP1210.02 AP1535.02
3 Cross Rail (Long) AP1210.03 AP1535.03
4 Feet AP1210.04 AP1535.04
5Wooden Top AP1210.05 AP1535.05
AP1210, AP1535 Issue 2 (F,5) 11/09/20

5. ASSEMBLY
5.1. Assemble leg supports (g.1.1) with short cross rail members (g.1.2, g.1.3) .
5.2. Assemble end frames with long cross rail members (g.1.4)
NOTE: Ensure full engagement of all members xings to ensure sound, stable structure.
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
g.1
AP1210 AP1535
AP1210, AP1535 Issue 2 (F,5) 11/09/20