Sharp AR-M207 User manual

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
Parts marked with “ “ are important for maintaining the safety of the set.
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
DIGITAL COPIER
AR-M207
AR-M165
MODEL AR-M162
CODE : 00ZARM207/A1E
[ 1 ] GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[ 2 ] SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[ 3 ] CONSUMABLE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[ 4 ] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . 4 - 1
[ 5 ] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 5 - 1
[ 6 ] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[ 7 ] SIMULATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
[ 8 ] TROUBLE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 -1
[ 9 ] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
[10] DISASSEMBLY AND ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . 10 - 1
[11] KEY OPERATOR PROGRAM. . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1
[12] FRASH ROM VERSION UP PROCEDURE . . . . . . . . . . . . . . 12 - 1
[13] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 1
CONTENTS
AR-M162
AR-M165
AR-M207
With the RSPF installed
[00]COVER.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時４分

[00]COVER.fm 2 ページ ２００４年１１月１２日 金曜日 午後２時４分

CONTENTS
[1] GENERAL
1. Cautions on using . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
2. Installation requirements . . . . . . . . . . . . . . . . . . . . . . . .1-1
3. Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
[2] SPECIFICATIONS
1. Basic specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
[3] CONSUMABLE PARTS
1. Supply system table. . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
2. Environmental conditions. . . . . . . . . . . . . . . . . . . . . . . .3-2
3. Production number identification . . . . . . . . . . . . . . . . . .3-2
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
2. Internal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
3. Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
4. Display(base screen) . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
5. Motor, solenoid, clutch . . . . . . . . . . . . . . . . . . . . . . . . . .4-6
6. Sensor, switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7
7. PWB unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8
8. Cross sectional view . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9
[5] UNPACKING AND INSTALLATION
1. Installing conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
2. Removal of protective material and fixing screw . . . . . .5-1
3. Installing procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
4. Removal and storage of fixing screw . . . . . . . . . . . . . . .5-2
5. Changing the paper size setting of a trey. . . . . . . . . . . .5-3
[6] ADJUSTMENTS
1. Adjustment item list . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
2. Copier adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
[7] SIMULATIONS
1. Entering the simulation mode. . . . . . . . . . . . . . . . . . . . .7-1
2. Canceling the simulation mode . . . . . . . . . . . . . . . . . . .7-1
3. List of simulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
4. Contents of simulations . . . . . . . . . . . . . . . . . . . . . . . . .7-3
[8] TROUBLE CODE LIST
1. Trouble code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
2. Details of trouble codes . . . . . . . . . . . . . . . . . . . . . . . . 8-2
[9] MAINTENANCE
1. Maintenance table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
2. Maintenance display system. . . . . . . . . . . . . . . . . . . . . 9-2
3. Note for replacement of consumable parts. . . . . . . . . . 9-2
[10] DISASSEMBLY AND ASSEMBLY
1. High voltage section/Duplex transport section . . . . . . . 10-1
2. Optical section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
3. Fusing section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4
4. Paper exit section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
5. MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
6. Optical frame unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
7. LSU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
8. Tray paper feed section/Paper transport section. . . . . . 10-10
9. Manual multi paper feed section. . . . . . . . . . . . . . . . . . 10-11
10. Power section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
11. Developing section . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-14
12. Process section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15
13. Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16
[11] KEY OPERATOR PROGRAM
1. Custom setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
2. Copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-1
[12] FLASH ROM VERSION UP PROCEDURE
1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
2. Driver Installation procedure. . . . . . . . . . . . . . . . . . . . . 12-1
3. Download procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
4. Version confirming procedure. . . . . . . . . . . . . . . . . . . . 12-5
[13] ELECTRICAL SECTION
1. Block diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
2. Circuit descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
3. Actual wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 13-8
[co]CONTENTS.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時２１分

AR-M207 M165 M162 GENERAL 1-1
[1] GENERAL
1. Cautions on using
A. Warning
•The fusing area is hot. Exercise care in this area when removing misfed
paper.
•Do not look directly at the light source. Doing so may damage your eyes.
B. Cautions
•Do not switch the machine rapidly on and off. After turning the machine
off, wait 10 to 15 seconds before turning it back on.
•Place the machine on a firm, level surface.
•When the machine is not used for a long time, for example, during
prolonged holidays, turn the power switch off and remove the power
cord from the outlet.
•When moving the machine, be sure to turn the power switch off and
remove the power cord from the outlet.
•Do not cover the machine with a dust cover, cloth or plastic film while
the power is on. Doing so may prevent heat dissipation, damaging the
machine.
•Do not make any modifications to this machine. Doing so may result in
personal injury or damage to the machine.
•Do not make copies of anything which is prohibited from copying by law.
The following items are normally prohibited from printing by national
law. Other items may be prohibited by local law.
Money, Stamps, Bonds, Stocks
Bank drafts, Checks, Passports, Driver’s licenses
•Do not touch the photoconductive drum. Scratches or smudges on the
drum will cause dirty prints.
•Store spare toner cartridges in a cool dry place without removing from
the package before use.
•If they are exposed to direct sunlight or excessive heat, poor copies
may result.
2. Installation requirements
Improper installation may damage this product. Please note the following
during initial installation and whenever the
machine is moved.
1. The machine should be installed near an accessible power outlet for
easy connection.
2. Be sure to connect the power cord only to a power outlet that meets
the specified voltage and current requirements. Also make certain the
outlet is properly grounded.
•For the power supply requirements, see the name plate on the back of
the main unit.
Note: Connect the machine to a power outlet which is not used for other
electric appliances. If a lighting fixture is connected to the same
outlet, the light may flicker.
3. Do not install your machine in areas that are:
•damp, humid, or very dusty
•exposed to direct sunlight
•poorly ventilated
•subject to extreme temperature or humidity changes, e.g., near an air
conditioner or heater.
4. Be sure to allow the required space around the machine for servicing
and proper ventilation.
Fusing unit
8" (20 cm)
8"
(20 cm)
8"
(20 cm)
[01]GENERAL.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時５分

AR-M207 M165 M162 GENERAL 1-2
3. Configuration
A. System Configurations
MODEL
OPTION AR-M207 AR-M165 AR-M162 Remark
AR-RP6N REVERSING SINGLE PASS FEEDER OPT OPT NO
AR-SP6N SINGLE PASS FEEDER OPT OPT OPT
AR-VR5 DOCUMENT COVER OPT STD STD
AR-D24 250-SHEET PAPER FEED UNIT OPT OPT OPT
AR-D25 2 x 250-SHEET PAPER FEED UNIT OPT OPT OPT
AR-TR4 JOB SEPARATOR TRAY KIT OPT OPT OPT
AR-EB9 DUAL FUNCTION BOARD STD*1 STD STD*1 *1
Option for
USA,CANADA.
AR-NB3 NETWORK PRINTING / SCANNING
EXPANSION KIT OPT OPT OPT
AR-FX11 FACSIMILE EXPANSION KIT OPT OPT OPT
AR-SM5 EXPANSION MEMORY OPT OPT OPT
AR-MM9 FAX EXPANSION MEMORY OPT OPT OPT
AR-PF1 BARCODE-FONT KIT OPT OPT OPT The AR-NB3 is
required
AR-PK1N PS3 KIT OPT OPT OPT The AR-NB3 is
required
AR-PF2 FLASH MEMORY KIT OPT OPT OPT The AR-NB3 is
required
RSPF(AR-RP6N)
SPF(AR-SP6N)
Network Box
(AR-NB3)
AR-M207
With the RSPF installed
AR-M165
AR-M162
2 X 250 sheet paper
feed unit
(AR-D25)
250 sheet paper
feed unit
(AR-D24)
Job separator
(AR-TR4)
[01]GENERAL.fm 2 ページ ２００４年１１月１２日 金曜日 午後２時５分

AR-M207 M165 M162 SPECIFICATIONS 2-1
[2] SPECIFICATIONS
1. Basic Specification
A. Base Engine
(1) Type
(2) Engine speed
(3) Print performance
* GDI print measurement conditions: Host PC/CPU = 500 700MHz or
above, Windows 98SE, Data = TestChart-B1.doc, USB1.1, when
supporting A4/Letter.
Measurement method: With setting to 11, from completion of the first
paper exit to completion of the 11th paper exit
(4) Copy speed(cpm)
(5) First copy time
* Measurement conditions: When feeding paper of A4/8.5" x 11" from the
main unit tray, polygon rotation state
First copy time from the document feed unit
(6) Job Speed
* S S(from No. 1 cassette): 10 sheets of A4/8.5" x 11" document, 5
copies
* S D(from No. 1 cassette): 10 sheets of A4/8.5" x 11" document, 5
copies
* D D(from No. 1 cassette): 10 sheets of A4/8.5" x 11" document(20
surfaces), 5 copies
(7) Continuous copying
(8) Engine composition
(9) Engine resolution
(10)Scanner section
AR-M207, AR-M162 / M165 Desk-top
Paper size AR-M207 AR-M162 / M165
A4/8.5" x 11" 20ppm 16ppm
A4R/8.5" x 11"R 14/15ppm 12ppm
A5/5.5" x 8.5" 20ppm 16ppm
B5/16K 20ppm 16ppm
B5R/16KR 16/15ppm 14ppm
8.5" x 13" 12ppm 11ppm
B4/8.5" x 14 12ppm 10ppm
A3/11" x 17"/8K 11/10/11ppm 9/9/10ppm
AR-M207 AR-M162 / M165
GDI Print* 12ppm 12ppm
SPLC Print 20ppm(ROPM) 16ppm(ROPM)
AR-M207 AR-M162 / M165
Normal
Reduction Enlargement Normal Reduction Enlargement
A4/8.5"x11" 20 20 20 16 16 16
A4R/
8.5"x11"R 14/15 14/15 14/15 12 12 12
A5/5.5"x8.5" 20 20 20 16 16 16
B5/16K 20 20 20 16 16 16
B5R/16KR 16/15 16/15 16/15 14 14 14
8.5x13" 12 12 12 10 10 10
B4/8.5"x14 12 12 12 10 10 10
A3/11"x17"/
8K 11/10/ 11 11/10/ 11 11/10/ 11 9/9/10 9/9/10 9/9/10
First copy time 7.2sec or less
Main unit first
stage 7.2sec or less
Main unit second
stage 8.5sec or less
Option paper feed
first stage 9.5sec or less
Option paper feed
second stage 10.5sec or less
Manual tray 7.5sec or less
SPF 12sec or less
RSPF 12sec or less
AR-M207 AR-M162 / M165
S S 20 Sheets/min(100%) 16 Sheets/min(100%)
S D 9 Sheets/min(45%) -
D D 8 Sheets/min(40%) -
Max. number of
multi copy 1-999copies(Can be changed to 1-99 in key operator programs)
Photoconductor
type OPC(Organic Photo Conductor)
Photoconductor
drum dia. 30mm
Process cleaning Blade
Copy lamp Cold cathode fluorescent lamp(CCFL)
Developing system Dry 2-component magnetic brush development
Charging system Saw teeth charging
Transfer system (+)DC scorotron
Separation system (-)DC scorotron
Fusing system Heat roller
Process speed 88mm/s
Resolution Reading: 600 x 300dpi1(600 x 600dpi selectable)
Writing: 600x600dpi
Gradation Reading: 256 gradation, Writing: 2 gradations
Scanner(Document table)
[02]SPECIFICATIONS.fm 1 ページ ２００４年１１月１６日 火曜日 午後３時２３分

AR-M207 M165 M162 SPECIFICATIONS 2-2
(11) Document table
AB and inch can be switched to each other by Sim.
(12) SPF/RSPF
(13) Operation panel
a. Display device
b. Key
c. Characters used in LCD
(14) Controller board
Interface
(15) Paper feed section
Max. Document
size A3/11"x17"
Scan area 297 x 431mm
Document
reference position Left back corner reference
Detection(Platen) Available
Detection size Automatic detection(supported by each unit for
inch/AB)
AB system: A3, B4, A4, A4R, A5,
Inch system: 11" x 17", 8.5" x 14",
8.5" x 11", 8.5" x 11"R
OR guide display Left back corner
(Print display) Document reference position “ ”
Left side document
guide (From the back) [Postal card] · [A6 ] · [B6
] · [5-1/2] · [A5 ] · [B5 ] ·
[A4/A5 ] · [8-1/2] · [B4/B5
] · [11] · [A3/A4 ]
Left side document
guide (From the left) [5-1/2] · [A5] · [B5] · [A4/
A5 ] · [8-1/2] · [B5 ] · [11]
· [A4 ] · [13] · [14] · [B4 ] ·
[A3 ] · [17]
Back side document
guide(Bookmark) B5(Vertical), A4(Vertical), bookmark
at 8" - 1/2" position(From
the left)
Type SPF/RSPF Single/Duplex automatic
document feeder unit
Scan speed Single surface When copying: 20-sheet
model/20 sheets/min
16-sheet model/16 sheets/min
When FAX: 23 sheets/min
Document
reference position Center
Document size AB system: A3-A5
Inch system: 11" x17" - 5.5" x 8.5"
Document weight 56 - 90g/m²(15 - 24lbs)
when duplex: 56 - 90g/m²(15 - 24lbs)
Document load
capacity 40 sheets(30 sheets of 90g/m² loadable)(30 sheets for B4/8.5" x 13" or above)40 sheets of 4mm
thickness or below loadable
Inhibited kinds of
documents Transparency film, Perforated sheets, photo, catalogue
Detection Avaiable
Detection size * Automatic detection(A kind ofdetection unit is used
by switching the software destination.)
AB system: A3,B4,A4,A4R,B5,B5R,A5
Inch system: 11" x 17", 8.5" x 14", 8.5" x
11", 8.5" x 11"R, 5.5" x 8.5"
Document tray
guide display Tray center(Marked) Document insertion direction “ ”document face-up set
command
Document
guide(Marked) (From the center) A3/A4, 11", B4/B5, 8.5",
A4R/A5, B5R, A5R, 5.5"
Type LCD display with backlight
System FSTN
Display dot
number 119 x 73 dots
LCD drive display
area 78.867 x 41.653 mm
LCD brightness
adjustment Available
Type 7 segment LED(x 3)
Mode selection
area Copy mode key(mode LED) Print mode key(mode LED/ONLINE LED/DATA
LED)
Scanner mode key(mode LED)
Fax mode key(mode LED/LINE LED/DATA LED)
Basic input section Start key/LED
Numeric keys
* AUDIT CLEAR key
# Read End key
Clear/Stop key
Interrupt key
All Clear key
LCD display
section Exposure key(Color mode/Program) Paper key(Resolution/Program)
Zoom key(Address)
Auto% key(Format/Broadcast)
Duplex key(Duplex scan)
Sort(Document size)
Special function key
Fax status key
Arrows key
OK key
Back key
LINE STATUS indicator
(when the fax option is installed)
Panel language
support English(Factory setting) For the languages other than English, the key
sheet is packed together with the machine or
manual kit. Attach it when installing.
Kind ROM font
Dot 6(W)x 12(H)
CPU H8S2321(16bit 1-chip microprocessor,
19.6608MHz)
Memory 16MB(Single surface model)
32MB(Duplex surface model)
IEEE1284 Parallel 1 port
USB1.1 1 port
USB2.0 1 port(Standard/option area)
Ethernet 1 port(Network box)
Type 4-stage paper feed tray + multi manual paper feed
Paper feed system Front loading, paper feed from the top
[02]SPECIFICATIONS.fm 2 ページ ２００４年１１月１６日 火曜日 午後３時２３分

AR-M207 M165 M162 SPECIFICATIONS 2-3
Main unit tray
(16) Manual paper feed section
(17) Duplex
(18) Paper exit section
(19) Exposure(Print density)
(20) Void width
* For void area/image loss, normal/single copy.
* For the first sheet of manual paper feed, the rear edge void is disable.
(21) Warm-up
(22) Copy magnification ratio
(23) Power source
(24) Power consumption
* Must conform to energy saving laws, international standards, and
company regulations.
Size to be fed A3, B4, A4, A4R, B5, B5R, A5(No.1 tray only)
16K, 16KR, 8K,
11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11",
8.5" x 11"R, 5.5" x 8.5"(No. 1 tray only)
Paper size setting User setting
Paper size setting A3, B4, A4, A4R, B5, B5R, A5,
11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11",
8.5" x 11"R, 5.5" x 8.5"
(For A5/5.5" x 8.5", however, No. 1 cassette only)
Paper size setting
when shipping AB system: A4 Inch system: 8.5" x 11"
Kind and weight of
applicable paper Standard paper 56 - 90g/m²
Paper feed
capacity Standard paper 250 sheets(64g/m²)
Paper type Standard paper, Recycled paper
Remaining
quantity detection Only empty detection available
Manual paper feed
form Foldable manual paper feed tray
Paper size A3 - A6,
11" x 17" - 8.5" x 11"
Manual paper feed
guide display A3/A4, B4/B5, A4R/A5, B5R, A5R, B6R, A6R
Kind and weight of
applicable paper Standard paper Thick paper(56 - 200g/m²)
Recycled paper, Envelope, Transparency film,
Labels
Paper capacity Standard
paper 100 Sheets (Standard paper: 56 - 80g/m²)(Multi
paper feed: 56 -128g/m²)
Envelope AB system: 10 Sheets
Inch system: 5 Sheets
Other Single paper feed(Transparency film,
Labels, Postal card)
Paper kind AB system: Standard paper/Recycled paper/
Transparency film/Labels/Postal card/Envelope/
Thick paper(-200g/m²)
Inch system: Standard paper/Recycled paper/
Transparency film/Labels/Postal card/Envelope/
Thick paper(-200g/m²)
Paper size
detection None
Paper empty
detection Available
Standard 20-sheet model: Standard provision
16-sheet model: Not available
Type Switchback system
Paper size A3, B4, A4, A4R, B5, B5R, A5,
11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11",
8.5" x 11"R
Kind and weight of
applicable paper Standard paper: 56 - 90 g/m²/15 - 24lbs Bond
Paper exit
position/system Face down
Paper exit section
capacity 250 sheets
Paper exit paper
size/kind All feedable paper types and sizes
Paper exit paper
full detection Upper stage: Available(Detected when the job separator is installed)
Lower stage: None
*250 sheets of counted and detected.
Density mode Auto/Text/Photo
NO. Of manual
adjustment 5 steps(Text/Photo)
Toner save mode Available(Default OFF with the service simulation)
Void area Lead edge: 1 - 4mm, rear edge: 4mm or less,
both sides: 6mm
Image loss 4mm or less
Warm-up time 45sec or less
Pre heat Available
Jam recovery time 45sec or less
Left for 60 sec after door open.
Standard condition, polygon stop
Fixed
magnification ratio AB system: 25, 50, 70, 81, 86, 100, 115, 122, 141, 200, 400%
Inch system: 25, 50, 64, 77, 95, 100, 121, 129,
141, 200, 400%
Zooming 25-400%(SPF/RSPF: 50-200%)
Independent
zooming Vertical/horizontal: 25-400% (SPF/RSPF: 50-200%)
Voltage 100V, 110V, 120V, 127V, 230V(200V), 240V
Frequency 50/60Hz
Power switch One power source
Max. Power
consumption 1200W
Power
consumption in
operation
550W
Power
consumptionwhen
standby
10W
[02]SPECIFICATIONS.fm 3 ページ ２００４年１１月１６日 火曜日 午後３時２３分

AR-M207 M165 M162 SPECIFICATIONS 2-4
(25) Environment support
(26) Noises
(27) Ozone & dust
(28) External dimensions
(29) Occupying area
(30) Weight
(31) Printer basics
GDI/SPLC Print
(32) Scanner basics
Support program International Energy-Star
Nordic swan
Canadian environment selection program
Blue angel
eco-label
Green purchase network
Green purchase law
Energy-saving law
Green products
Noise level Must conform to SS, blue angel, Nordic swan.
Regulated value Ozone: 0.02mg/m³ or less
Dust: 0.075mg/m³ or less
Styrene: 0.07mg/m³ or less
1-stage cassette model(floor
surface - glass surface)
590(W) x 595(D) x 435(H)
1-stage cassette model(floor
surface - OC)
590(W) x 595(D) x 469(H)
1-stage cassette model(floor
surface - SPF)
590(W) x 595(D) x 568(H)
2-stage cassette model(floor
surface - glass surface)
590(W) x 595(D) x 520(H)
2-stage cassette model(floor
surface - OC)
590(W) x 595(D) x 554(H)
2-stage cassette model(floor
surface - SPF)
590(W) x 595(D) x 652(H)
3-stage cassette model(floor
surface - glass surface)
590(W) x 595(D) x 605(H)
3-stage cassette model(floor
surface - OC)
590(W) x 595(D) x 640(H)
3-stage cassette model(floor
surface - SPF)
590(W) x 595(D) x 738(H)
4-stage cassette model(floor
surface - glass surface)
590(W) x 595(D) x 690(H)
4-stage cassette model(floor
surface - OC)
590(W) x 595(D) x 725(H)
4-stage cassette model(floor
surface - SPF)
590(W) x 595(D) x 823(H)
Main unit only
(excluding the handle)
590(W) x 595(D)
Main unit(Multi manual feed open) 880(W) x 595(D)
20-sheet model
(Electronic sort : Standard)
34.2 (Kg)
20-sheet model
(Electronic sort : Option)
33.8 (Kg)
16-sheet model
(Electronic sort/Duplex)
30.6 (Kg)
16-sheet model
(Electronic sort : Standard)
30.0 (Kg)
16-sheet model
(Electronic sort : Option)
29.7 (Kg)
Print speed GDI: 12PPM(GDI Print, USB2.0(Full speed), A4/
Letter)
Measurement conditions:
Host PC/CPU: 500 700MHz, RAM: 256MB or
above, Windows98SE
Data Testchart-B1, dot
SPLC: According to the main machine speed.
First Print 7.2sec or less
Resolution 600dpi
Duplex print Available
Paper feed system Paper feed tray and multi paper feed
Shifter Installed to the main unit paper exit section.
Shift amount: 1 inch(25.4mm)journalizing according
to every print job.
Supported OS Windows95/98/Me/NT4.0(Workstation SP5 or
later)/2000(Professional)/XP(Home/Professional)
Emulation GDI
SPLC(JBIG-GDI): When the Dual function board
(AR-EB9) is installed (Standard or option).
Interface IEEE1284(ECP, Compatible)
USB1.1
USB2.0(When the Dual function board (AR-EB9)
is installed (Standard or option).
PnP Support Windows 95/98/Me/2000/XP
Software Status Window
ROPM When the Dual function board (AR-EB9) is
installed (Standard or option).
WHQL Yes(XP/2000) after a few month later from first lot.
Type Flat bed color scanner
Scan system Document table/document feed unit
Light source White CCFL
Resolution Basic 600 x 600 dpi
Set range: 50 - 9600dpi
Document Sheet/Book
Effective scan
range
OC/SPF/RSPF: about 297(length)x 431(width)mm
Scan speed 2.88msec/Line(Color)
Input data 1bit or 12bit
Output data 1bit or 8bit
Scan color Black and white binary/Gray scale/Full color
Protocol TWAIN/WIA(XP Only)/STI
Interface USB1.1
USB2.0
Scanner utility Sharpdesk
Drop-out color Provided
Scanner button Destination selection by LCD
Duplex scan Available
Supported OS Windows98/Me/2000(Professional)/XP(Home/
Professional)
Void area Lead edge/rear edge: 2.5mm
Side Left/right: 3.0mm
WHQL Yes(XP/2000) after a few month later from first lot.

AR-M207 M165 M162 SPECIFICATIONS 2-5
(33) Network box basics
B. Peripheral devices basic specifications
(1) Single pass feeder(SPF)
(2) Reversing single pass feeder(RSPF)
Standard memory 64MB
Expansion
memory 1DIMM 1 slot 144pin 128/256MB SO-DIMM
Interface RJ45, USB port(for connection with the main unit)
LED Power LED, 10/100BASE-Tx mode LED,
LAN status LED, USB status LED
Switch Status Switch
Supported OS
Windows 95/98/Me/NT4.0(Workstation SP5 or
later)/2000 professional/XP Home Edition/XP
Professional Edition/Windows Sever 2003
Mac OS 8.6 - 9.2.2, 10.1.5, 10.2 - 10.2.8 (excluding
10.2.2), 10.3 - 10.3.4 (when PS option)
Setting software Internet Explorer 5.5 or later, Netscape Navigator 6
or later
Expansion option PS expansion kit(AR-PK1N)
Barcode font kit(AR-PF1)
Flash ROM kit(AR-PF2)
Sharpdesk(Sharp desk license kit AR-U series)
Network protocol TCP/IP, IPX/SPX(NetWare), NetBEUI,
Ether Talk(Apple Talk)
Emulation PCL/PS(PS is cancelled by the soft key.)
ESC/P Font Kanji: Mincho, Gothic(Bitmap)
ANK: Roman, Sans Serif(Bitmap)
E-RIC Canceled by the soft key.
Document set Face up
Document
reference position Right side center
Document
transport system Sheet through type
Document feed
direction Document feed from the top
Document size AB system: A3 - A5
Inch system: 11" x 17" - 5.5" x 8.5"
Document weight 56 - 90g/m²(15 - 24lbs)
Document set
quantity 40 sheets(40 sheets of 4mm thickness or less can be loaded.)
(30 sheets of 90g/m² can be loaded. 30 sheets for
B4 or 8.5" x 13" or above.)
External
dimensions 583 mm(W) x 435 mm(D) x 133 mm(H)
Weight 5.0kg
Power Supplied from the machine(Power consumption:
21W)
Document size
detection On the document feed trey
Detection size AB system A3, B4, A4, A4R, B5, B5R, A5
Inch system 11" x 17", 8.5" x 14", 8.5" x 11",
8.5" x 11"R, 5.5" x 8.5"
Guide display (From the center)
A3/A4, 11", B4/B5, 8.5", A4R/A5, B5R, A5R, 5.5"
Documents out of
specifications Transparency film/Perforated document, photo, catalogue
Multi copy S-S, S-D(Duplex model)
Document mixture Not available
Random paper
feed Not available
Document
reversion Not available
Display
section(LED) None
Reliability(MCBJ/
MCBF) Conforms to the main unit.
Document
replacement
speed(Standard
copy)
S-S 16-sheet model: 100%
20-sheet model: 100%
S-D 20-sheet model: 45%(9 sheets/min)
D-D -
Item included Installation manual
Case color Frosty white
Installation Must be installed easily.
Document set Face up
Document
reference position Right side center
Document
transport system Sheet through type
Document feed
direction Document feed from the top
Document size AB system: A3 - A5
Inch system: 11" x 17" - 5.5"x8.5"
Document weight 56 - 90g/m²(15 - 24lbs)
Duplex: 56 - 90g/m²(15 - 24lbs)
Document set
quantity 40 sheets(40 sheets of 4mm thickness or less can be loaded.)
(30 sheets of 90g/m² can be loaded. 30 sheets for
B4 or 8.5" x 13" or above.)
External
dimensions 583 mm(W) x 435 mm(D) x 133 mm(H)
Weight 5.4kg
Power Supplied from the machine(Power consumption:
26.4W)
Document size
detection On the document feed trey
Detection size AB system A3, B4, A4, A4R, B5, B5R, A5
Inch system 11" x 17", 8.5" x 14", 8.5" x 11",
8.5" x 11"R, 5.5" x 8.5"
Guide display (From the center)
A3/A4, 11", B4/B5, 8.5", A4R/A5, B5R, A5R, 5.5"
Documents out of
specifications Transparency film, Perforated document, photo, catalogue
Multi copy S-S, S-D, D-D, D-S(Duplex model)
Document mixture Not available
Random paper
feed Not available
Document
reversion Available(Not available for 5.5" x 8.5" and 5.5" x 8.5"R)
Display
section(LED) None
Reliability(MCBJ/
MCBF) Conforms to the main unit
Document
replacement
speed(Standard
copy)
S-S 16-sheet model: 100%
20-sheet model: 100%
S-D 20-sheet model: 45%(9 sheets/min)
D-D 20-sheet model: 40%(8 sheets/min)
Item included Installation manual
Case color Frosty white
Installation Must be installed easily
[02]SPECIFICATIONS.fm 5 ページ ２００４年１１月１６日 火曜日 午後３時２３分

AR-M207 M165 M162 SPECIFICATIONS 2-6
(3) 1-stage paper feed unit
(4) 2-stage paper feed unit
(5) Dual function board
(6) Original cover(OC)
(7) 256MB expansion memory
(8) Job separator
(9) Network box
(10) Facsimile expansion kit
(11) Barcode font kit
Same as the AR-PF1.
(12) Flash memory kit
Same as the AR-PF2.
(13) PS3 expansion kit
Same as the AR-PK1N.
(14) Facsimile expansion memory
Same as the AR-MM9.
Paper feed
capacity 250 Sheets
Paper size
detection Not available(The paper size can be set with the function menu.)
Paper empty
detection Available
Paper size A3, B4, A4, A4R, B5, B5R, 11" x 17", 8.5" x 14",
8.5" x 13", 8.5" x 11", 8.5" x 11"R, 16K, 16KR, 8K
Paper weight 56 - 90g/m²(15 - 24lbs)
Factory setting
size AB system: A4 Inch system: 8.5" x 11"
Size selection A3, B4, A4, A4R, B5, B5R,11" x 17", 8.5" x 14",
8.5" x 13", 8.5" x 11", 8.5" x 11"R
Cassette
installation/
removal
Can be made by the user
Power Supplied from the machine(Power consumption:
5.6W)
External
dimensions 590 mm(W) x 471 mm(D) x 88mm(H)
Weight 5.0Kg
Reliability(MCBJ/
MCBF) Conforms to the main unit
Item included Installation manual, Paper size label
Case color Frosty white
Paper feed
capacity 250 Sheets x 2
Paper size
detection Not available(The paper size can be set with the function menu.)
Paper empty
detection Available
Paper size A3, B4, A4, A4R, B5, B5R, 11" x 17", 8.5" x 14",
8.5" x 13", 8.5" x 11", 8.5" x 11"R, 16K, 16KR, 8K
Paper weight 56 - 90g/m²(15 - 24lbs)
Factory setting
size AB system: A4 Inch system: 8.5" x 11"
Size selection A3, B4, A4, A4R, B5, B5R
11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11",
8.5" x 11"R
Cassette
installation/
removal
Can be made by the user
Power Supplied from the machine(Power consumption:
8.4W)
External
dimensions 590 mm(W) x 471 mm(D) x 174 mm(H)
Weight 10.0Kg
Reliability(MCBJ/
MCBF) Conforms to the main unit
Item included Installation manual, Paper size label
Case color Frosty white
Expansion
function Electronic sort function, 2In1/4In1, Rotation copy, Edge erase/Center erase, Margin shift, Card shot
USB2.0(High-speed support),SPLC print(JBIG-
GDI), ROPM function
Electronic sort
compress function JBIG
Memory for
electronic sort 16MB
Electronic sort
scan quantity A4 standard document(Test chart B)100 sheets
Memory
expansion DIMM Memory slot x 1 Max. 256MB x 1slot + 16MB(Max 272MB in total)
(Externally described as max. 256MB x 1)
Item included Installation manual,
Function Up/down open/close mechanism
Item included Installation manual
Memory 256MB
Item included Installation manual
Installation
conditions Install when the printer or the FAX is expanded. Performs paper exit for every job
Bin number 1 bin
Distribution
system Controlled by the main unit.
Paper size Conforms to the main unit paper feed paper.
Paper weight Conforms to the main unit paper feed paper.
Paper exit section
capacity Upper stage: 100 Sheets Lower stage: 150 Sheets
Paper exit job Upper stage: FAX output or printer output
Lower stage: Copy output or printer output
Paper exit full
detection Upper stage: Available Lower stage: YES (Full detection by the counter)
Power None
Item included Installation manual
Case color Frosty white
Installation Must be installed easily
Function Supports the network printer(PCL/PS)and the
network scanner.
Power Supplied from the machine
(Power consumption: 5.5W)
External
dimensions 248 mm(W) x 127 mm(D) x 59 mm(H)
Item included USB2.0code x 1
Software CD(Driver/Network setting/application)
Installation manual
Function FAX expansion option
Item included One-touch dial key, destination label, installation
manual
[02]SPECIFICATIONS.fm 6 ページ ２００４年１１月１６日 火曜日 午後３時２３分

AR-M207 M165 M162 SPECIFICATIONS 2-7
C. Various functions specifications
(1) Copy function specification
(2) Printer function specification
a. GDI/SPLC Printer
<Summary>
<GDI/SPLC Printer function>
Only the summary is described on this item.
Function/
Special function Automatic paper selection Yes
Automatic
magnification
ration selection
Yes
Auto tray
switching Yes
Memory copy Yes
Rotation copy Yes (When electronic sort)
Electronic sort Yes (Standard or option)
Rotation sort No
X Y zoom Yes
Dual page copy Yes (Enlargement invalid/SPF
invalid(Patent rotation)
Sort function Yes (Standard or option)
100 sheets of A4 standard
document (Test Chart B)are sorted.
Margin shift Yes (When electronic sort)
Default
AB system: 10mm(5, 10, 15,
20mm)
Inch system: 1/2 Inch(1/4, 1/2, 3/4,
1 Inch)
Edge erase Yes (When electronic sort)
Default
AB system: 10mm(5, 10, 15,
20mm)Inch system: 1/2 Inch(1/4,
1/2, 3/4, 1 Inch)
Center erase Yes (When electronic sort)
Default
AB system: 10mm(5, 10, 15,
20mm)
Inch system: 1/2 Inch(1/4, 1/2, 3/4,
1 Inch)
Black/white
reverse No
2in1/4in1 Yes (When electronic sort)
Sorter Yes (Offset function)
Card shot Yes (When electronic sort)
Preheating Yes (Set by the key operator
program.)
Auto shut-off Yes (Set by the key operator
program.)
Total counter Yes
Duplex Yes (Standard provision for the
model of 20-sheet model only)
Toner save Yes (Set according to the
destination) (No setting. * Default
OFF with the service simulation.)
Department
management Yes (Copy/printer/scanner: 50 Dept,
Fax 50 dept)
Platform IBM PC/AT(Include compatible machine)
Supported OS IEEE1284 Windows95/98/Me/
NT4.0(Workstation SP5)/
2000(Professional)/XP(Home/
Professional)
USB1.1 Windows98/Me/
2000(Professional)/XP(Home/
Professional)
USB2.0 Windows2000(Professional)/
XP(Home/Professional)
Emulation GDI/JBIG GDI
Memory Environments for full operations of the above OS
Function Content
Main Copies 1-999 Makes prints of the set
number of copies.
Collate Collate
Uncollate When this item is set to "Collate," prints of two or
more copies are collated.
When set to "Uncollated,"
two or more copies of each
page are
printed(uncollated).
Document
Style 1-sided 2-sided(Book)
2-sided(Tablet)
Single face or double face
print is made according to
the setting. When set to
duplex, the printing
direction differs depending
on book or tablet.
N-up *1 2/4 The set pages are printed
on one sheet.
N-up Order Z
N-up Border Yes/No Border lines are printed
between pages printed on
one sheet.
Duplex 1-sided
2-sided(Book)
2-sided(Tablet)
Paper Paper Size A3/B4/A4/B5/
A5/A6/B6/
Ledger/Legal/
Foolscap/
Folio/Letter/
Invoice/
Executive/8K/
16K/COM-10/
DL/C5/
Custom/Postal
card
Print is made in the set
paper size. Even when the
actual paper size differs
from the set paper size,
images are formed printed
in the set paper size.
Custom Paper
Size *2 1 size Width: 100 - 297mm Length: 148-431.8mm
Fit to Page Yes/No The print size is changed
according to the set
content.
Image
Orientation Portrait Landscape Printing is made in the set direction.
Paper
Selection Auto Bypass
Tray 1/2(3/4)
Paper is fed from the set
paper feed tray.
Rotate 180
Degree Yes/No Data are rotated 180 degrees and printed.
[02]SPECIFICATIONS.fm 7 ページ ２００４年１１月１６日 火曜日 午後３時２３分

AR-M207 M165 M162 SPECIFICATIONS 2-8
(3) Scanner function Specification
a. PUSH Scan(USB)
b. PULL Scan(TWAIN)
c. Network Push scan(When the network box is installed)
Paper Output Tray
Selection Upper Tray Center Tray When the job separator is installed, selection is made
between the upper stage
and the center stage of the
paper exit tray.
Advanced Print Quality Draft
Normal
Photo
Draft/Normal (only for
Windows 9x, Me)
Image
Adjustment Yes/No Contrast and brightness of images are adjusted. For
Windows NT4.0/2000/XP,
enable only for the Photo
mode of Print Quality.
Brightness 0 - 100% The image brightness is
adjusted by moving the
scale from 0 to 100. The
illustration image on the
left upper corner of the
display is changed.
Contrast 0 - 100% The image contrast is
adjusted by moving the
scale from 0 to 100. The
illustration image on the
left upper corner of the
display is changed.
Pured Black
print Yes/No A document made by a CAD program is printed in
black to provide clear print
of color line images and
texts.
Water-
marks Watermarks None/TOP SECRET/
CONFIDENTI
AL/DRAFT/
ORIGINAL/
COPY
User Setting Add/Update/
Delete
Position Center
X: ± 50
Y : ± 50
Size 6 - 300
Angle ± 90
Grayscale 0 - 255
Edit Font Yes
On First Page
only Yes/No
Function Content
Supported OS Win98/Me/2000/XP
Hardware
environment (System)Must meet the operating conditions of each OS.
(HDD)8MB or above: 100MB or above
recommendable
(Monitor)800 x 600 dots or above, 256 colors or
more must be displayed.
(Other)USB port(1.1 or 2.0)
Selectable
destination SharpDesk/E-mail software/Fax software/OCR software/MS Word
USB TWAIN
Supported OS Win98/Me/2000/XP
Hardware
environment (System)Must meet the operating conditions of each OS.
(HDD)8MB or above: 100MB or above
recommendable
(Monitor)800 x 600 dots or above, 256 colors or
more must be displayed.
(Other)USB port
Duplex scan Yes
Color mode Black and white(Simple binary)/Black and
white(Error diffusion)/Gray scale/Full color
Resolution Pull: 600 x 600dpi
Emulation: 50-9600dpi
Custom: 50-9600dpi
Preview function Yes
Zoom preview
function Yes
Rotation scan Yes (90 degrees/180 degrees/270 degrees)
Brightness/
contrast
adjustment
Auto/Manual(-100 - +100)
Gamma
adjustment Yes
Color matching None/Printer/CRT/LCD display/ICM
Edge emphasis None/Normal/Strong/Blur
Black/white
reverse Yes
Light source
selection Yes (Red/Green/Blue/White)
Threshold value
setting Auto/Manual(1 - 254)
Void area addition Available(Top/End edge = 2.5mm /Left/Right =
3.0mm)
Set contents save Yes
Selectable
destination Scan to E-mail/FTP/Desktop
Destination
selection method Address book LDAP retrieval/selection
Ad-Hoc(10-key input)
[02]SPECIFICATIONS.fm 8 ページ ２００４年１１月１６日 火曜日 午後３時２３分

AR-M207 M165 M162 CONSUMABLE PARTS 3-1
[3] CONSUMABLE PARTS
1. Supply system table
A. USA / CANADA
B. Europe / Australia / New Zealand
NO Name Content Life Product name Remark
1 Toner cartridge(Black)
<With IC> Toner (Toner: Net Weight 537g)
Vinyl bag
x10
x10
160K AR-202MT Life setting by A4 6% document
2 Developer Developer
(Developer : Net Weight 400g) x10 500K AR-202MD
3 Drum kit Drum
Drum fixing plate x1 x1 50K AR-202DR
NO Name Content Life Product name Remark
1 Toner cartridge(Black)
<With IC> Toner (Toner: Net Weight 537g)
Vinyl bag
x10
x10
160K AR-202LT Life setting by A4 6% document
2 Developer Developer
(Developer : Net Weight 400g) x10 500K AR-202LD
3 Drum kit Drum
Drum fixing plate x1 x1 50K AR-202DM
[03]CONSUMABLEPARTS.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時８分

AR-M207 M165 M162 CONSUMABLE PARTS 3-2
2. Environmental conditions
A. Transport conditions
(1) Transport conditions
(2) Storage conditions
B. Use conditions
C. Life(packed conditions)
Photoconductor drum (36 months from the production month)
Developer, toner (24 months from the production month)
3. Production number identification
<Toner cartridge>
The label on the toner cartridge shows the date of production.
<Drum cartridge>
The lot number, printed on the front side flange, is composed of 6 digits,
each digit showing the following content:
Temperature
Humidity (%)
Temperature
Humidity (%)
Humidity (%)
Temperature
Use envi-
ronment
conditions
123456
1 Alphabet
Indicates the model conformity code. A for this model.
2 Number
Indicates the end digit of the production year.
3 Number or X, Y, Z
Indicates the month of packing.
X stands for October, Y November, and Z December.
4/5 Number
Indicates the day of the month of packing.
6 Alphabet
Indicates the production factory. "A" for Nara Plant, “C“ for
SOCC
Ver.No.Production
place
Serial
number
Year/
Month/
Day
[03]CONSUMABLEPARTS.fm 2 ページ ２００４年１１月１２日 金曜日 午後２時８分

AR-M207 M165 M162 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-1
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance
1 USB 2.0 port (USB-2)
(when the dual function board is installed) Connect to your computer to this port to use the printer and scanner functions.
2 USB 1.1 port (USB-1) Connect to your computer to this port to use the printer and scanner functions.
3 Parallel port Connect to your computer to this port to use the printer function.
4 Charger cleaner Use to clean the transfer charger.
5 Glass cleaner Use to clean the original scanning glass.
6 Document glass Place an original that you wish to scan face down here.
7 Handles Use to move the machine.
8 Power switch Press to turn the machine power on and off.
9 Center tray Copies and printed pages are output to this tray.
10 Upper tray (when the job separator tray kit is installed) Received faxes (when the fax option is installed) and print jobs are delivered to this
tray.
11 Operation panel Contains operation keys and indicator lights.
12 Front cover Open to remove paper misfeeds or replace the toner cartridge.
13 Tray 1 Tray 1 can hold approximately 250 sheets of copy paper (64 g/m²).
14 Tray 2 Tray 2 can hold approximately 250 sheets of copy paper (64 g/m²).
15 Document cover (when installed) Open to make a copy from the document glass.
16 Side cover Open to remove misfed paper.
17 Side cover handle Pull to open the side cover.
18 Bypass tray guides Adjust to the width of the paper when using the bypass tray.
19 Bypass tray Special paper (heavy paper or transparency film) can be fed from the bypass tray.
20 Bypass tray extension Pull out when feeding large paper such as 11" x 17" and 8-1/2" x 14" (A3 and B4).
11
12
10
9
4
14 13
15
7
16
17
18 19 20
1
2
3
5
6
7
8
[04]EXTERNALVIEWS.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時８分

AR-M207 M165 M162 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-2
2. Internal
Warning: The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury.
Caution: Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause
smudges on copies.
Note: The model name is on the front cover of the machine.
21 Toner cartridge lock release lever To replace the toner cartridge, pull out the toner cartridge while pushing on this lever.
22 Toner cartridge Contains toner.
23 Document feeder tray (when the SPF is installed) Place the original(s) that you wish to scan face up here. Up to 40 sheets can be
placed.
24 Original guides (when the SPF is installed) Adjust to the size of the originals.
25 Feeding roller cover (when the SPF is installed) Open to remove misfed originals.
26 Right side cover (when the SPF is installed) Open to remove misfed originals.
27 Fusing unit release levers To remove the paper misfed in the fusing unit, push down on these levers and
remove the paper.
28 Roller rotating knob Rotate to remove misfed paper.
29 Exit area (when the SPF is installed) Originals exit the machine here after copying/scanning when the SPF is used.
30 Reversing tray (when the RSPF is installed) Pull out to remove misfed originals.
31 Photoconductive drum Images are formed on the photoconductive drum.
32 Fusing unit paper guide Open to remove misfed paper.
2728
22
21
23 24 25
26
31 32
29 30
[04]EXTERNALVIEWS.fm 2 ページ ２００４年１１月１２日 金曜日 午後２時８分

AR-M207 M165 M162 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-3
3. Operation panel
1 Keys for fax function (when the fax option is installed) These are used in fax mode.
2 [COPY] key/indicator Press to select copy mode. If pressed when "Ready to copy." appears or during
warm-up, the total number of sheets used appears while the key is pressed.
3 [PRINT] key/indicator Press to select print mode.
• ONLINE indicator
Print jobs can be received when this indicator is lit.
• DATA indicator
This lights steadily when there is a print job in memory that has not been printed,
and blinks during printing.
4 [SCAN] key/indicator Press to select scan mode.
5 Display Shows various messages. For more information see page 5-5.
6 [BACK] key Press to return the display to the previous screen.
7 [FAX STATUS] key This key is used in fax mode.
8 [OK] key Press to enter the selected setting.
9 Copy number display The selected number of copies appears. During copying, this shows the remaining
number of copies.
10 Numeric keys Use to select the number of copies.
11 [INTERRUPT] key/INTERRUPT indicator Interrupts a copy run to allow an interrupt copy job to be performed.
12 [C] key Press to clear the set number of copies or stop a copy run.
13 Information lamp
(when the fax option is installed) Information lamp blinks, when facsimile is received, or when the paper remains in the tray.
14 [FAX] key/indicator (when the fax option is installed)
LINE indicator, DATA indicator This key is used in fax mode.
ON LINE DATA
LINE DATA
SCAN
FAX
PRINT
26 27 28 29 30
31 32 33 34 35
41 42 43 44 45
46 47 48 49 50
36 37 38 39 40
ABCDE
FGH I J
KLMNO
PQR TS
U V W XYZ SP
SPEAKER
SHIFT
REDIAL/PAUSE SPEED
SYMBOL
COMM. SETTING
SPACE/
COPY
13
2
134
14
[04]EXTERNALVIEWS.fm 3 ページ ２００４年１１月１２日 金曜日 午後２時８分

AR-M207 M165 M162 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-4
For U.S.A.
For other country
15 [EXPOSURE] key Use to select the exposure mode. "AUTO", "TEXT", or "PHOTO" can be selected.
16 [PAPER] key (PAPER SELECT key) Use to manually select a paper tray.
17 [ZOOM] key (COPY RATIO key) Press to select a reduction or enlargement copy ratio.
18 [AUTO%] key (AUTO IMAGE key) Press to have the copy ratio selected automatically.
19 [SORT] key (Only effective when the dual function
board is installed) Use to select the sort function.
20 [DUPLEX] key (2-SIDED COPY key) (only on models
that support two-sided printing) Select the two-sided copying mode.
21 Arrow keys Press to move the highlighting (which indicates that an item is selected) in the
display.
22 [SPECIAL FUNCTION] key Press to select special functions.
23 [ACC.#-C] key Press the end the use of an account and return the display to the account number
entry screen.
24 [0] key Press during a continuous copy run to display the number of copies completed.
25 [READ-END] key When copying in sort mode from the document glass, press this key when you have
finished scanning the original pages and are ready to start copying.
26 [START] key/indicator Copying is possible when this indicator is on. Press the key to start copying.
27 [CA] key Clears all selected settings and returns the machine to the default settings.
5967 8 1011 12
15 16 17 18 19 20 21 22 27262523 24
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
@.-
_
COPY
EXPOSURE PAPER ZOOM AUTO % OUTPUT DUPLEX
SPECIAL FUNCTION
ACC. #-C READ-END
SCAN
FAX
COLOR MODE
PROGRAM
RESOLUTION
RESOLUTION
ADDRESS FORMAT ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN
ORIGINAL SIZE
ADDRESS BROADCAST
OK BACK
FAX STATUS
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
@.-
_
COPY
EXPOSURE
PAPER
SELECT
COPY
RATIO
AUTO
IMAGE OUTPUT
2-SIDED
COPY SPECIAL FUNCTION
ACC. #-C READ-END
SCAN
FAX
COLOUR MODE
PROGRAM
FORMAT
BROADCAST
OK BACK
FAX STATUS
RESOLUTION ADDRESS ORIGINAL SIZE DUPLEX SCAN
5967 8 1011 12
15 16 17 18 19 20 21 22 27262523 24
[04]EXTERNALVIEWS.fm 4 ページ ２００４年１１月１２日 金曜日 午後２時８分

AR-M207 M165 M162 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-5
4. Display(base screen)
1 Exposure display Indicates the selected exposure mode.
2 Special function icon display Icons of enabled special functions will appear.
3 Message display Messages are displayed regarding machine status and operation.
4 Original size display The size of the placed original and the icon of the original scanning mode will
appear.
: One-sided scanning in the SPF.
: Scanning on the document glass
: Two-sided scanning in the RSPF.
5 Copy ratio display Displays the copy ratio for reduction or enlargement.
6 Paper size display Displays the selected paper size. When "AUTO" appears, the most suitable size of
paper is automatically selected.
7 Paper tray display The selected paper tray is highlighted.
Example: Copy mode
* The display shown is the AR-M207 (when the optional
RSPF is installed) display.
Icons appearing in the special function icon display
* These only appear when the dual function board is
installed.
Ready to copy.
8 x11
100%
8 x11
AUTO
AUTO
23 4
5
1
76
12
12
1-sided to 2-sided
copy
Center erase
copy*
2-sided to 2-sided
copy
Edge + Center
erase*
2-sided to 1-sided
copy 2 in 1 copy*
Sort function* 4 in 1 copy*
Margin shift copy* Dual page copy
Erase copy* Card shot*
[04]EXTERNALVIEWS.fm 5 ページ ２００４年１１月１２日 金曜日 午後２時８分