Sharp Shuttle PN-SPCi5W7 User manual

PN-SPCi5W7H
INSTALLATION
GUIDE

CONTENTS
INSTALLATION INSTRUCTIONS
Computer Bracket Installaon
Power Adapter Bracket Installaon
Peripheral Connecon
SOFTWARE
Power On-O Instrucon
Windows 8 Language Opons
Recovery Paron
COMPUTER HARDWARE
Computer Specicaons
Warranty Statement
Windows Product Key Locaon

COMPUTER BRACKET INSTALLATION:
VESA Mount Instruction
INSTALLATION INSTRUCTIONS
1
Line up the four VESA Mount holes in the center to the four 100x100
Paern holes furthest to the right of the panel. Ensure the VESA Mount
has the two pins facing the boom and Thumb Screw Slits on the top.
It is recommended to slide the VESA mount bracket furthest to the
right before ghtening. Use the four screws provided in the accessory
box to retain the VESA Mount to the Display.
Remove the PC Media Player from the packaging and begin to remove
the two thumb screws by twisng counter-clockwise. Aer removing
the thumb screws, separate the PC Media Player from the VESA mount.
You should have the PC Media Player in one hand and the VESA mount
in the other.

INSTALLATION INSTRUCTIONS
2
Take the Computer and posion the Power Buon facing outwards.
Place the boom of the Computer on the two pins and push the top
of the Computer into the VESA Mount.
Now to install the Computer to the Aquos Board using the VESA
Mount. Use the thumb screws that were originally used
to aach the VESA mount to the Computer and rst go through
the VESA Mount then into the Computer. Installing your PC
Media players VESA mount is now complete.

POWER ADAPTER
BRACKET INSTALLATION
INSTALLATION INSTRUCTIONS
3
Remove the Power Adapter Bracket
from the Accessory box. Posion
the long solid edge inwards and the
empty edge facing outwards. Screw
the Power Adapter Bracket onto the
available holes to the le of the
panel. Move the Power Adapter
Bracket le to right for proper
adjustments to give more space
around your cables.
Slide the Power Adapter into the bracket with the Three
Prong on top and the Power Connecon to the PC Media
Player at the boom. Procedure for mounng the Power
Adapter Bracket is now complete.

INSTALLATION INSTRUCTIONS
PERIPHERAL CONNECTION GUIDE
PN-L603A/B, PN-L703A/B Series
4
*RJ11 Installation
RJ11 cable must be connected to the two pins furthest to the
right above the power icon. Please insure that the yellow cable
is on the top pin.
*
*

5
SOFTWARE
POWER ON-OFF INSTRUCTION GUIDE

SOFTWARE
6
WINDOWS 8 LANGUAGE OPTIONS
1] Hover over the right corner of your screen and select the sengs buon.
2] Click Change PC Sengs
3] Select Time and Language

SOFTWARE
7
WINDOWS 8 LANGUAGE OPTIONS CONT.
4] Select Region and Language
5] Click on Add a Language
6] Select French Language

SOFTWARE
8
7] Once the download completes, click on the language and set as primary.
8] Click the right corner of your tray and select French (Canada.)

RECOVERY PARTITION GUIDE
SOFTWARE
Turn on the unit and
when the boot screen
appears, press F12.
Next, the system will go into
recover mode. Allow a few
seconds for the les to load.
Once the les are loaded, the
Recovery Welcome Screen will
appear.
Select
“Yes, I accept the EULA”
opon.
9

SOFTWARE
Select the
“Start WIN7
Recovery” buon.
Click “OK” to conrm
process system recovery.
Warning: Restoring your computer to
the factory sengs will remove all
les and programs except those it
came with. You will lose all personal
les, including photos, emails and
programs, if you do not back up your
les and data.
The system will start the
recovery process.
Once the process is
completed, click “OK” to
reboot the system.
10

COMPUTER HARDWARE
COMPUTER SPECIFICATIONS
FRONT
1) Microphone Input
2) Headphone Input
3) Power LED
4) Hard Disk LED
5) Power Buon
6) SD Card Reader
7) 4 x USB 2.0
BACK
A) 2 x WiFi Antenna
Input
B) RS232/RS422/RS485
C) RS232
D) Venlaon Grill
E) DC Power Input
F) 2 x RJ45 Gigabit LAN
G) 2 x USB 3.0
H) 2 x USB 2.0
I) 2 x DisplayPort(DP)
Video Port
J) HDMI Video Port
K) Connector for external
power buon (two
pins, 2.54 mm pitch)
Slim Design - Slim 1.3 Liter Metal Chassis, Black
- Dimensions: 7.5 x 6.5 x 1.7 inches (LWH) - Including VESA Mount (75/100 mm)
Operating
System - Windows® 7 Professional 64BIT
Processor - Intel® CoreTM i5-4590S Processor
Chipset - Intel® H81 Express Chipset
Memory - 4GB PC3-10600 1333MHz DDR3 SODIMM Non-ECC
Graphics - Integrated Intel® HD Graphics (Features
Depends on Processor)
- Video-Outputs: HDMI & 2 x Display Port (DP)
- Supports 4K/2K Resoluon
Storage - 2.5” 256GB SATA III Internal SSD
Other
Connectors
- 2 x USB 3.0 (Rear), 6 x USB 2.0 (4 x Front)
- SD Card Reader, 2 x Audio (Line Out + Mic)
- Dual Gigabit LAN (RJ45), Supports WOL, PXE
- 2 x COM Ports (RS232 + RS232/RS422/RS485)
- Connector for External Power Button
Power
Supply - External 90W Fanless Power Adapter
11

COMPUTER HARDWARE
WINDOWS PRODUCT KEY LOCATION
Your Microso CD Key is an important item of your PC’s identy. This CD Key
can be used when asking for technical support, reformang the computer or
showing authencity of your Microso license. This guide will show you how
to nd your Microso CD Key. If your PC is already mounted to your display,
please unplug all connecons to the PC and remove the hardware from the
retaining bracket. Once the PC is in your hands, please rotate the PC onto its
back. At the boom of the PC you will nd your Microso CD Key. Reference
the image below for addional informaon.
1) Microso CD Key (COA)
2) Hardware Serial Number
3) System ID
4) Shule Computer Group Inc. FCC Label Details
1
2
3
4
Learn more about TV & video we offer on our website.