ShoreStation Manual SSV50108MS User manual

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 1 of 43 10/20/2009
ACCESSORY
Your SHORESTATION Aluminum Boat Lift is designed to give years of dependable service. Following the
enclosed instructions will insure you that your lift is properly assembled.
SSV50108MS, SSV50108MSDW, SSPV50108MS, &
SSPV50108MSDW
ATTENTION: This Boat Lift uses
stainless steel fasteners. ALWAYS apply
anti-seize to fastener threads before
assembly to prevent galling or seizing.
SSV50108MS
SSPV50108MS

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 2 of 43 10/20/2009
Manual 5000# 108” Aluminum Cradle with Stainless Steel Fasteners
Table of Contents
SSV50108MS STANDARD LIFT
68681 Lower Frame Bundle 40108HYD
70225 Platform Bundle Alum 50/60M&E
7035701 Wheel Big Lift ShoreStation SS
7036101 Winch Assy Hoist 60108/120 SS
70421 Winch Tube Bundle V50108/120 SS
70432 Leg Bundle SSV50108/120SS
70435 Lit Packet SSV50108MS/DW/PV
70444 Hdwe Box SSV50108/120MS/E/PV
HA0086 Bunk Poly 4000H/6000M/E Alum
HA0087 Motor Stop Bundle 5.75 Alum V
SSV50108MSDW STANDARD DEEP WATER LIFT
68681 Lower Frame Bundle 40108HYD
70225 Platform Bundle Alum 50/60M&E
7035701 Wheel Big Lift ShoreStation SS
7036101 Winch Assy Hoist 60108/120 SS
70421 Winch Tube Bundle V50108/120 SS
70433 Leg Bundle SSV50108/120SSDW
70435 Lit Packet SSV50108MS/DW/PV
70444 Hdwe Box SSV50108/120MS/E/PV
HA0086 Bunk Poly 4000H/6000M/E Alum
HA0087 Motor Stop Bundle 5.75 Alum V
You and Your ShoreStation………………….3
Using Your Lift…………………………………3 & 4
Detail Drawings & BOM………………………5 thru 19
Base Pad…………………….6
Lift Arm……………………….6
Leg-Winch……………………7
Leg-1, 2, 3……………………8
Lower Frame…………………9
Platform………………………10
Spacer Tube…………………11
Cable Connections………….11
Winch Tube…………………..12 & 13
Winch Attachments………….14
Bunk Attachment & Assy…...15 & 16
Pontoon Assembly…..………17
Motor Stop……………………18
Lift Wheel……………………..19
Winch Assembly……………..20 & 21
For more detailed information regarding the
Installation, Transporting, Operation, Safety,
Maintenance, and additional accessories available
for your lift see your SHORESTATION Operators
Manual.
Assembly Instructions……………………22 Thru 38
Tools Required……………………………22
Pads………………………….22
Pad-Leg-Lift Arm……….......23
Lower Frame………………..24 Thru 26
Platform………………………27 Thru 29
Spacer Tube…………………29 & 30
Level Cable Connections…..31
Winch Tube…………………..31
Winch………………………….32
Wheel Stop Assy & Brkt…….33
Winch & Lift Cable Connect...34
Bunks……………………….....35
Motor Stop…………………….36
Leg Caps………………………37
Adjustments & Operators Info…………....38 Thru 43
SSPV50108MSDW PONTOON DEEP WATER LIFT
68681 Lower Frame Bundle 40108HYD
70225 Platform Bundle Alum 50/60M&E
7035701 Wheel Big Lift ShoreStation SS
7036101 Winch Assy Hoist 60108/120 SS
70421 Winch Tube Bundle V50108/120 SS
70433 Leg Bundle SSV50108/120SSDW
70435 Lit Packet SSV50108MS/DW/PV
70444 Hdwe Box SSV50108/120MS/E/PV
HA0096 Pontoon Kit V Alum Cradle Lifts
SSPV50108MS PONTOON LIFT
68681 Lower Frame Bundle 40108HYD
70225 Platform Bundle Alum 50/60M&E
7035701 Wheel Big Lift ShoreStation SS
7036101 Winch Assy Hoist 60108/120 SS
70421 Winch Tube Bundle V50108/120 SS
70432 Leg Bundle SSV50108/120SS
70435 Lit Packet SSV50108MS/DW/PV
70444 Hdwe Box SSV50108/120MS/E/PV
HA0096 Pontoon Kit V Alum Cradle Lifts

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 5 of 43 10/20/2009
The diagram below and the line art drawings on the following pages are there to give you information on where
parts are used and if needed the part numbers you will need if replacement parts are needed.

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 6 of 43 10/20/2009
.

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 7 of 43 10/20/2009
Standard and Deep Water Winch Tube Leg Assemblies

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 8 of 43 10/20/2009
Standard and Deep Water Leg Assemblies

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 9 of 43 10/20/2009
Lower Frame Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 10 of 43 10/20/2009
Aluminum Platform Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 11 of 43 10/20/2009
Brace Tube Mounting/Level Cable Mounting Hardware and Leg Tube Cap
Bottom Level Cable Mounting Hardware

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 12 of 43 10/20/2009
Winch Tube Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 13 of 43 10/20/2009
Lift Cable Mounting Hardware
Winch Tube Mounting Components
Mechanical Wheel Stop Mount

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 14 of 43 10/20/2009
Winch, Wheel, and Platform Stop Mounting Hardware and Cable Wedge

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 15 of 43 10/20/2009
Bunk Mounting Hardware

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 16 of 43 10/20/2009
Bunk Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 17 of 43 10/20/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 18 of 43 10/20/2009
Motor Stop and Mounting
Hardware

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 19 of 43 10/20/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 20 of 43 10/20/2009
Winch Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004134
Page 21 of 43 10/20/2009

FASTENER CHANGEOVER
STAINLESS STEEL TO BRASS
The following fastening hardware will be changing from stainless steel to brass in the
pre-packaged bags and in the accessory kits and will no longer require the use of an
anti-seize compound on the threaded hardware.
Stainless Steel Components Brass Replacement Components
1450079
HEX LOCKNUT 5/16-18 SS W/NYLON 1440365 HEX LOCKNUT 5/16-18 BRASS /NYLON
1450099
HEX LOCKNUT 3/8-16 SS W/NYLON 1440366 HEX LOCKNUT 3/8-16 BRASS/NYLON
1450109
HEX NUT 3/8-16 STAINLESS 1410403 HEX NUT 3/8-16 BRASS
1450357
HEX LOCKNUT 1/2-13 SS W/NYLON 1440367 HEX LOCKNUT 1/2-13 BRASS/NYLON
The assembled components such as leg assemblies, winch tubes, and v frames that are
assembled at Midwest Industries Inc. and should not need adjustment will continue to
be assembled with all stainless steel components.
0004151