ShoreStation SSV30108 User manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 1 REV C 02/27/2009
SSV30108 & SSV30108 DW
SSV30108 Hoist Alum SS V-Frame
6243601 Big Wheel - Lift ShoreStation
69426 Hardware Box - SSV30108 Hoist
62504 Lower Frame Bundle - V30108
62864 Platform Bundle - V30108
6942701 Winch Bundle - Hoist V15/V30
65021 Winch Tube Bundle - V30/V40
62927 Leg Bundle - V30108
HA0024 Motor Stop Bundle Alum 5” V-Frame
HA0053 Bunk Poly V30/V30108 / V30/40120
69586 Lit Packet, V30108/DW
SSV30108 DW Hoist Alum SS V-Frame
6243601 Big Wheel - Lift ShoreStation
69426 Hardware Box - SSV30108 Hoist
62504 Lower Frame Bundle - V30108
62864 Platform Bundle - V30108
6942701 Winch Bundle - Hoist V15/V30
65021 Winch Tube Bundle - V30/V40
67227 Leg Bundle - V30108 DW
HA0024 Motor Stop Bundle Alum 5” V-Frame
HA0053 Bunk Poly V30/V30108 / V30/40120
69586 Lit Packet, V30108/DW
SSV30108 Shown in Drawing

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 2 REV C 02/27/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 3 REV C 02/27/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 4 REV C 02/27/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 5 REV C 02/27/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 6 REV C 02/27/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 7 REV C 02/27/2009
Winch Post Guide Post
Lower Frame Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 8 REV C 02/27/2009
Platform Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 9 REV C 02/27/2009
Winch Tube Assembly WINCH TUBE SERVICE INSTRUCTIONS
The winch tube assembly was pre-assembled at the factory.
It is important that the internal parts and cable routings are
assembled properly in order for the winch tube assembly to
function properly. It also requires special tools during the as-
sembly process. It is therefore recommended that you con-
tact your local dealer should you ever have issues with the
winch tube assembly.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 10 REV C 02/27/2009
Winch Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 11 REV C 02/27/2009
Wheel Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 12 REV C 02/27/2009
Bunk Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 13 REV C 02/27/2009
Motor Stop Assembly
Adjustment
Position the hoist motor stop assembly on the hoist so it
is centered side to side on the hoist platform. Changing
the motor stop location front to rear is accomplished by
sliding the straight portion of the motor stop arm through
the U-bolts. This allows you to change the motor stop
location to best position your boat on the hoist. Once the
assembly is in the proper position, tighten the nuts on the
U-bolts.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003782
Page 14 REV C 02/27/2009
DW Leg Assembly (Optional)
The deep water version of this boat hoist is assembled using the
same assembly instructions as the standard hoist. The only items
that are different between the two hoists are the length of the up-
right corner posts and the adjustable legs inside them as identied
in the drawings for deep water legs.
The water depth where your hoist is going to be installed will deter-
mine whether you should use the deep water version of this hoist.
The deep water version of this hoist can be used in deeper
water depths because of the additional length of the exten-
sion legs. Listed below is the amount of adjustment the vari-
ous legs have.
• A standard leg shipped with the hoist has 20” of
adjustment.
• The deep water legs have 55” of adjustment.