ShoreStation SSV20100EAC User manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 1 REV C 03/09/2009
SSV20100EAC & SSV20100EACDW
SSV20100EAC Hoist Alum SS V-Frame - EAC
69423 Hardware Box - SSV20100 Hoist
62421 Lower Frame Bundle - V20100
62423 Platform Bundle - V20100
6941501 Winch Assembly - AC - V20/V40
65582 Winch Tube Bundle - V20100
62926 Leg Bundle - V20100
HA0020 Bunk Poly V15/20100 Hoist
69584 Lit Packet, V20100EAC/DW
NOTE: When referencing the front of hoist, this represents the winch end. When referencing the hoist end, this represents opposite of the
winch end. Which side is also referred to the right side of the hoist.
SSV20100EAC DW Hoist Alum SS V-Frame - EAC
69423 Hardware Box - SSV20100 Hoist
62421 Lower Frame Bundle - V20100
62423 Platform Bundle - V20100
6941501 Winch Assembly - AC - V20/V40
65582 Winch Tube Bundle - V20100
67227 Leg Bundle - V20100 DW
HA0020 Bunk Poly V15/20100 Hoist
69584 Lit Packet, V20100EAC/DW

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 2 REV C 03/09/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 3 REV C 03/09/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 4 REV C 03/09/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 5 REV C 03/09/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 6 REV C 03/09/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 7 REV C 03/09/2009
Winch Post Guide Post
Lower Frame Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 8 REV C 03/09/2009
Platform Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 9 REV C 03/09/2009
Winch Tube

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 10 REV C 03/09/2009
AC Drive Winch Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 11 REV C 03/09/2009
Bunk Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 12 REV C 03/09/2009
DW (Deep Water) SECTION:
The deep water version of this boat hoist is assembled using
the same assembly instructions as the standard hoist. The
only items that are different between the two hoists are the
length of the upright corner posts and the adjustable legs in-
side them as identied in the drawings for deep water legs.
The water depth where your hoist is going to be installed will
determine whether you should use the deep water version
of this hoist.
The deep water version of this hoist can be used in deeper
water depths because of the additional length of the exten-
sion legs. Listed below is the amount of adjustment the vari-
ous legs have.
• A standard leg shipped with the hoist has 20” of
adjustment.
• The deep water legs have 55” of adjustment.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003786
PAGE 30 REV C 03/09/2009
4811504
Max Load
Decal - Winch
Assembly
4811312
Clamp Arrow Decal
4811319
Adj. Gauge Decal
4811502
Safety Operating Decal
4850408
Not A Step Decal
4850363
Safety Decal
4850408
Not A Step
Decal
4811312
Clamp Arrow Decal
4811319
Adj. Guage Decal
SSV20100EAC Decal Placement
4811504 Maximum Load Decal - Winch Assy
4811502 Safety Operating Decal
4811312 Clamp Arrow Decal
4811319 Adj. Gauge Decal
4850363 Safety Decal
4850408 Not A Step Decal