ShoreStation SSV60108EAC User manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 1 Rev B 03/16/2009
SSV60108EAC
SSV60108EAC Hoist Alum SS V-Frame - EAC
68204 Hardware Box - SSV60108/120 Hoist
68261 Lower Frame Bundle - SSV60108
68262 Platform Bundle - SSV60108
6941701 Winch Assembly - AC 6000 lb Hoist
69626 Winch Tube Bundle - SSV60108/120
68203 Leg Bundle - SSV60108/120
HA0024 Motor Stop Bundle Alum 5” V-Frame
HA0021 Bunk Poly V40H-60108/120 - 60132H
69628 Lit Packet, V60108EAC
NOTE: When referencing the front of hoist, this represents the winch end. When referencing the hoist end, this represents opposite of the
winch end. Which side is also referred to the right side of the hoist.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 2 Rev B 03/16/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 3 Rev B 03/16/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 4 Rev B 03/16/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 5 Rev B 03/16/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 6 Rev B 03/16/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 7 Rev B 03/16/2009
Winch Post Guide Post
Lower Frame Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 8 Rev B 03/16/2009
Platform Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 9 Rev B 03/16/2009
Winch Tube
WINCH TUBE SERVICE INSTRUCTIONS
The winch tube assembly was pre-assembled at the factory.
It is important that the internal parts and cable routings are
assembled properly in order for the winch tube assembly to
function properly. It also requires special tools during the as-
sembly process. It is therefore recommended that you con-
tact your local dealer should you ever have issues with the
winch tube assembly.
REPLACEMENT PARTS AND SERVICE
Use this parts manual to identify replacement parts for this
hoist if needed. Contact your local ShoreStation dealer for
replacement parts and service. If you do not have a local
dealer, contact ShoreStation toll free at 1-800-859-2038 for
assistance or visit us online at www.shorestation.com. Com-
plete manuals are also available online.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 10 Rev B 03/16/2009
AC Drive Winch Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 11 Rev B 03/16/2009
Bunk Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 12 Rev B 03/16/2009
HA0024 - Motor Stop
Adjustment
Position the hoist motor stop assembly on the hoist so it
is centered side to side on the hoist platform. Changing
the motor stop location front to rear is accomplished by
sliding the straight portion of the motor stop arm through
the U-bolts. This allows you to change the motor stop
location to best position your boat on the hoist. Once the
assembly is in the proper position, tighten the nuts on the
U-bolts.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003856
PAGE 28 Rev B 03/16/2009
4850408
Not A Step Decal
4811312
Clamp Arrow Decal
4811319
Adj. Guage Decal
4811505
Max Load
Decal
4850363
Safety Decal
4811312
Clamp Arrow Decal
4811319
Adj. Gauge Decal
4811502
Safety Operating Decal
4850394
Max Load Decal
4850408
Not A Step Decal
SSV60108EAC Decal Placement
4811505 Maximum Load Decal - Winch Assy
4811502 Safety Operating Decal
4811312 Clamp Arrow Decal
4811319 Adj. Gauge Decal
4850363 Safety Decal
4850408 Not A Step Decal
4850394 Maximum Load Decal - Winch Tube