Siemens Climatix HMI-TM Operator's manual

s
Climatix
TM
Climatix HMI
-TM POL871.7X/XXX
Basic
documentation
CB1P3917en02
2015-07-02
Building Technologies

2 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 2015-07-02
Siemens Switzerland Ltd.
Building Technologies Group
International Headquarters
Gubelstrasse 22
CH
-6301 Zug
Tel. +41 41
-724 24 24
Fax +41 41
-724 35 22
www.siemens.com/sbt
© 2013-2015 Siemens Switzerland Ltd.
Subject to change

3 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies Table of contents 2015-07-02
Table of contents
1Introduction ......................................................................................................4
1.1 Important notes...............................................................................................4
1.2 Purpose and scope.........................................................................................5
1.3 Document conventions...................................................................................5
1.4 Human machine interface...............................................................................5
1.5 Key features....................................................................................................6
1.6 Reference documents ....................................................................................6
1.7 Product variant ...............................................................................................6
2Connections......................................................................................................7
3HMI-TM overview..............................................................................................8
3.1 Function keys..................................................................................................8
3.2 LED indicators ................................................................................................9
3.3 Display specification.......................................................................................9
4Functions and operations .............................................................................12
4.1 Start up .........................................................................................................12
4.2 HMI settings..................................................................................................12
4.3 Controller access..........................................................................................15
4.4 Log in............................................................................................................16
4.5 Log off...........................................................................................................20
4.6 Context helper ..............................................................................................20
4.7 Parameter list................................................................................................21
4.8 Alarm management ......................................................................................23
4.9 Online trend..................................................................................................25
4.10 Graphical time scheduler..........................................................................26
4.11 Iconic mode ..................................................................................................31
4.12 Firmware update.......................................................................................35
5Function List...................................................................................................37

4 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 0BIntroduction 2015-07-02
1 Introduction
1.1 Important notes
Only authorized personnel is permitted to make diagnostics, to rectify faults and to
restart the plant. This also applies to work carried out within the control panel (e.g.
safety checks or replacement of fuses).
Note is used to emphasize the essential information. Be sure to read it to avoid
incorrect operation.
Cross-references are marked with . A topic is closely related to other contents
or described in details at other locations in this document. In order to keep the
manual lean and show you how topics are interrelated, cross-references are used.
The Climatix HMI-TM products can only be used in the field of heating, ventilation,
air conditioning and refrigeration.
Prerequisites for flawless and safe operation of the Climatix HMI-TM products are
proper transport, installation and commissioning, as well as correct operation.
Fuses, switches, wiring and grounding must comply with local safety regulations for
electrical installations.
The Climatix HMI-TM products can only be operated by personnel who have been
instructed by Siemens Building Technologies or their delegates and whose
attention has been drawn to potential risks.
When wiring the system, high voltage section must be strictly segregated from the
AC 24 V Safety Extra-Low Voltage (SELV) section in order to ensure protection
against electric shock hazard!
Always observe the limits for storage and transport specified in the relevant Data
Sheets.
The Climatix HMI-TM products are maintenance-free, apart from cleaning at
regular intervals. System sections accommodated in the control panel should be
free from dust and dirt whenever normal service visits are conducted.
Should system faults occur and you are not authorized to make diagnostics and
rectify faults, call your service personnel at Siemens Building Technologies.
The materials used in this product comply with 2002/95/EC directive of European
RoHS regulation and ACPEIP directive of China RoHS regulation.
The products contain electrical and electronic components and must not be
disposed of as domestic waste.
The relevant national legal regulations must be complied with and the products
must be disposed of via the appropriate channels. Local and currently valid
legislation must be observed!

Field of use
Proper use
Electrical installation
Operation
Wiring
Storage and transport
Maintenance
Faults
RoHS
Disposal

5 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies 0BIntroduction 2015-07-02
1.2 Purpose and scope
This document provides information regarding the HMI-TM device, including its
functions and operations. The programming of HMI-TM is not covered in this
document, but shall be governed by the Climatix SCOPE.
The target readers of this document are technical personnel of OEM ACR
customer, who may use the information provided in this document to write user
manual for dedicated application.
1.3 Document conventions
The following symbols are used in this document to indicate warnings and notes:
This symbol draws your attention to special safety notes and warnings. Ignoring
such notes can lead to personal injury and/or major damage to property.
This symbol precedes the notes that must be observed in order to prevent
malfunctions or data loss.
Notes with this symbol provide important information requiring appropriate
attention.
Paragraphs with this symbol provide tips.
The following abbreviations are used in this document:
Abbreviation
Explanation
BSP
Board Support Package (operating system)
HMI
Human Machine Interface (operation unit)
HMI-DM
Climatix Dot Matrix HMI POL895.xx
HMI-IB
Climatix In-Built on POL4xx/6xx
HMI-SG
Climatix Segmented HMI POL822.xx
HMI-TP
Climatix Touch Panel HMI POL8Tx
HMI-TM
Climatix Text Matrix HMI POL871.xx
HVAC
Heating, Ventilating, Air Conditioning
RU
Room Unit (e.g. POL822.xx)
SCADA
Supervisory Control and Data Acquisition
SELV
Safety Extra-Low Voltage
Name
Explanation
Climatix
Controller family with common tools
SAPRO
SAPRO programming tool
SCOPE
SCOPE commissioning and service tool
1.4 Human machine interface
The Climatix HMI-TM is designed for display, system configuration, set-up and
operation. It is a product of the Climatix range, supporting all Climatix range of
controllers.
The HMI-TM cannot be used to operate any 3rd-party devices.
Symbols used
STOP
Abbreviations
Products and Tools
Brief introduction

6 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 0BIntroduction 2015-07-02
1.5 Key features
- High screen resolution: 128 x 240 dots
- 6 keys for ease of operation
- Programmable menu with easy-to-understand structure
- Key ALARM, INFO and ESC with LED indicators
- Definable user password for every access level
- Support of multi-language and Unicode fonts
- Support of online trend, time scheduler and iconic mode function
- HMI local settings supported
- Data point access supported
- Powered by controller via local HMI connection
- Panel or magnetic mounting, hand-held operation
- Firmware can be updated via controller (SD card support required)
1.6 Reference documents
The following documents contain further information on the products described in
this document:
Document
Document No.
1
Data Sheet “Climatix HMI-TM”
CB1N3917en
2
Mounting Instructions “Climatix HMI-TM”
CB1M3917en
3
CE declaration of conformity
CB1T3917xx
4
Environment product declaration (POL871.71)
233006-T-0601_EN
5
Environment product declaration (POL871.72)
233006-T-0602_EN
1.7 Product variant
HMI-TM variant
Cable
Hand-held and magnetic mounting
version POL871.71
3 m customized cable with 1 RJ45 plug and 1
slim connector (4-wire twisted pair)
(included in HMI box)
Panel mounting version POL871.72 1.5 m Cat-5 Ethernet cable with 2 RJ45 plugs
(8-wire twisted pair)
(included in HMI box)

7 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies 1BConnections 2015-07-02
2 Connections
The local connection is a peer-to-peer connection between one HMI-TM and one
Climatix controller.
The maximum distance between HMI-TM and controller is 50 m via shielded
standard 8-wire twisted net cable.
For detail information, refer to Mounting Instruction CB1M3917en.
In case the Climatix controller is connecting to an HMI-TM (POL871) and
downloading the HMI.BIN file, the connection will not start until the downloading
process completes.
Cable for hand-held and magnetic
mounting version POL871.71
Cable for panel mounting version
POL871.72
3 m customized cable with 1 RJ45 plug
and 1 slim connector (4-wire twisted pair)
1.5 m Cat-5 Ethernet cable with 2 RJ45
connectors (8-wire twisted pair)
Local connection
Cable Type

8 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 2BHMI-TM overview 2015-07-02
3 HMI-TM overview
This section introduces the overview of Climatix HMI-TM.
3.1 Function keys
The function keys of HMI-TM are illustrated as follows:
* Hold the key for more than 2 seconds.
Key Name
Operation
Description
UP
Press
To increase the input value
Press and hold*
To enable the acceleration function to increase the value in a large
extent
DOWN
Press
To decrease the input value
Press and hold*
To enable the acceleration function to decrease the value in a large
extent
ENTER
Press - To select one item;
- To confirm the selection
Press and hold*
- If logging in with one user level, press and hold key ENTER to
activate the log in/off page;
- If not, press and hold key ENTER to redirect to the password entering
page
INFO Press
- If users have defined which page it redirects to and the current user
level has enough privileges, it will go to that page. Otherwise, it will
go to the home page (refer to Climatix SCOPE online help for detail
information about how to define the target page);
- In the password related page, the function of pressing key INFO
depends on the templates users defined (refer to
Password Management for details)
ALARM Press To activate and switch among alarm related pages (refer to
Alarm Management for details)
ESC Press
- To cancel modification;
- To exit to the upper level of menu or back to previous page
Press and hold*
To redirect to the page displaying the menu of HMI settings and Local
connection

9 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies 2BHMI-TM overview 2015-07-02
3.2 LED indicators
3.3 Display specification
The STN LCD with dot matrix resolution of HMI-TM is 240*128 pixels
(width*height).
The size of LCD screen is 93*58 mm (width*height). The size of visible area is
86.15*47.78 mm (width*height).
For Latin (English) characters, font sizes of 6*12 pixels and 7*14 pixels
(width*height) are supported; For Eastern Asian characters such as Chinese, font
sizes of 12*12 and 14*14 pixels (width*height) are supported.
Here are the examples:
LED Name
Status
Description
ALARM
Flashing in red
To indicate active but unacknowledged alarm exists
Constant light in red To indicate active alarms exist and all alarms acknowledged
Green Definable
OFF
To indicate no active alarm exists
The LED status can be defined by users, such as constant light in red/green/yellow, flashing in
red/green/yellow as well as OFF
INFO
Definable (for detail information, refer to Climatix SCOPE online help)
ESC Definable (for detail information, refer to Climatix SCOPE online help)
LCD
Character size
Displaying example

10 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 2BHMI-TM overview 2015-07-02
Label
Icon
Description
①
Key INFO
②
Key ALARM
③
Key ESC
④
•••
To indicate there are characters hidden in this line.
1. If the string is longer than the length of the line, “•••”
will be displayed at the end of the line. If this line is
highlighted, it will scroll automatically character by
character.
2. In a line with more than one string, if the end part of
a string is covered by the string of next position, “•••”
will be displayed at the end of the string. When this
line is highlighted, the first string with covered text
will scroll automatically character by character.
The character scrolling function assures that every
character is displayed completely each time.
⑤
►
To indicate a sub-menu exists
⑥
Key ENTER
⑦
▲
The icon on the right margin is to indicate key UP.
The icon on the upper margin is to indicate there are
other line(s) hidden above the current page.
+On the value-editing page, the icon “▲” becomes “+” to
indicate that the key is used for value increasing.
⑧
▼
The icon on the right margin is to indicate key DOWN.
The icon on the upper margin is to indicate there are
other line(s) hidden below the current page.
- On the value-editing page, the icon “▼” becomes “-” to
indicate that the key is used for value decreasing.
⑨
To indicate the HMI-TM does not login with any user
level
To indicate the current user level is End User
To indicate the current user level is Service
To indicate the current user level is OEM Factory
⑩
1/11 To indicate the total number of lines in this page is “11”,
and the 1
st
line is currently being selected
⑪
Title area
The title line, which will never be highlighted, supports all
tokens and has the same characteristics as the lines in
content area.
The target page can be defined by application engineer
on this line. When users press key INFO and the current
user level has the privilege to access to this target page,
it will redirect to this page. Regarding how to program a
title line, refer to Climatix SCOPE online help.
Displaying icons

11 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies 2BHMI-TM overview 2015-07-02
If there is writable value (data point) in a line, the whole line will be highlighted
when selected.
Press key ENTER, and the writable data point will be highlighted for users to
change the value:
If there is no writable value in a line, the first string will be highlighted when the line
is selected.
If there are more than one writable data point in a line, each data point can be
highlighted respectively by pressing key ENTER repeatedly:
In the case that 6*12 or 7*14 Latin characters are used, maximum 8 lines can be
displayed on one screen. Maximum 30 characters can be displayed in each line
including the submenu indictor “►”.
In the case that 12*12 or 14*14 Eastern Asian characters such as Chinese are
used, maximum 8 lines can be displayed on one screen. Maximum 15 characters
can be displayed in each line including the submenu indicator “►”.
The Latin characters and Eastern Asian characters are generated by SCOPE. Font
size of characters varies with different versions of SCOPE.
Highlight
Number of
characters
in a line

12 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 3BFunctions and operations 2015-07-02
4 Functions and operations
4.1 Start up
Connect the HMI-TM to the controller, and the sandglass icon will be displayed on
the screen:
If it is the initial connection, or a connection with new templates and objects, it will
automatically download the templates and objects information first. During the
downloading process, a process bar will be displayed as follows:
After the downloading process is completed, it will go to the home page as follows:
If the HMI-TM has been connected to the controller with the same templates and
objects as before, it will redirect to the home page.
4.2 HMI settings
Press and hold key ESC on any page to go to the following page:
The HMI settings page supports multi-language. The actual displaying language
depends on the certain language selected in the controller.

13 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies 3BFunctions and operations 2015-07-02
The version number and firmware upgrading menu on the HMI setting page as well
as the “Firmware Updating” page do not support multi-language (English only).
Select HMI settings in the above picture and press key ENTER. Then the following
screen will be displayed:
The first line of HMI setting page indicates the version number “VXX.XX” and the
build number “BXXXX”. On this page, users can change the screen settings as well
as update the firmware.
The firmware can be updated via controller. Refer to Section 4.12 Firmware
update for details.
The backlight color is configurable to be blue or white. Follow the steps to change
the backlight color:
1. Select Backlight color in the HMI setting page.
2. Press key ENTER to highlight Blue.
3. Press key UP to change the color.
Firmware update
Backlight color

14 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 3BFunctions and operations 2015-07-02
4. Press key ENTER to confirm. Then the backlight color will be changed.
The backlight of HMI-TM will automatically turn off if there is no operation within a
period of time (0…300 seconds). Follow the steps to change the backlight turn off
time:
1. Select Backlight turn off time.
2. Press key ENTER, and then press key UP/DOWN to change the value.
3. Press key ENTER to confirm the selection.
The backlight is always ON when the value is set to “0”.
The contrast ratio of HMI-TM screen can be configured from 0 to 100. Refer to 
Backlight turn off time for value editing.
The brightness of HMI-TM screen can be configured from 0 to 100. Refer to 
Backlight turn off time for value editing.
Backlight turn off time
Contrast
Brightness

15 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies 3BFunctions and operations 2015-07-02
4.3 Controller access
1. On the home page of HMI-TM, select Local connection and then press
key ENTER.
2. It will check whether the templates and objects (HMI.bin file) has been
loaded already. If yes, it will perform the next step directly. If not, the
process of downloading fonts and templates from controller to the HMI-TM
will start. A process bar will be displayed to indicate the process as follows:
3. If the version of controller BSP is above 7.32, the line suppression function
(refer to Climatix SCOPE online help for details) in controller will be
enabled and the HMI-TM will begin to download the objects. Aprocess bar
will be displayed to indicate the process as follows:
4. After the objects have been downloaded, it will redirect to the controller
start page as follows:
- This page is only available if it is the initial connection between HMI-TM and
controller or a connection with new templates and objects.
- If the version of controller BSP is below 7.32, it will redirect to the home page
without downloading the objects.
- Home page may be different according to the actual application.
C
ontroller access
operation

16 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 3BFunctions and operations 2015-07-02
4.4 Log in
After the communication between HMI-TM and controller has been set up, users
can log in with one of the following user levels listed in the table:
User level
Icon
Recommended usage
Description
Not login
The access rights of this
level are suitable for
users who view the basic
information of Climatix
range controllers.
No password required. The setting
is in accordance to the access
right from privilege 253 to 255 in
Climatix SCOPE. Refer to Climatix
SCOPE online help for details.
End user
The access rights of this
level are suitable for
users who operate the
Climatix range controllers.
These user levels are password
protected.
Service
The access rights of this
level are suitable for
users who perform
maintenance to Climatix
range controllers.
OEM
factory
The access rights of this
level are suitable for
users who configure the
Climatix range controllers.
The specific access right for each user level can be defined by application engineer.
The password related templates in SCOPE are listed in the following table, which
can be defined by application engineer in SCOPE.
Name
No.
1
Password entering page
[65410]
2
Password handling page
[65400]
3
Change factory password page
[65450]
4
Change service password page
[65451]
5
Change end user password page
[65452]
If users enter any one of these five pages from templates and press key ENTER, it
will check if the title line of the corresponding templates has defined the target page
and if the current user level has enough privileges.
If yes, it will redirect to the defined target page. If not, it will redirect to the home
page.
Press key INFO on any one of these five pages to go to the home page.
1. Press and hold key ENTER on any page (except the error report pages)
with OEM factory user level to activate the log in/off page as follows:
User level
Password management
Password
related
templates
For example

17 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies 3BFunctions and operations 2015-07-02
2. Press key INFO on the above page and it will redirect to the home page as
follows:
Users can enter the login page by two ways: entering the password from template
or pressing and holding key ENTER on any page (except the error report pages).
On the login page, input 4-digits (0…9) password predefined in application for
different user levels.
1. Choose a digit by pressing key UP/DOWN.
2. Press key ENTER to confirm the input, and the input value will become an
asterisk “*” as follows.
Press key ESC to exit from the current page. Press and hold key ENTER
to re-enter the password.
3. Enter correct 4-digit password and it will go to the target page defined in
the HMI template. The corresponding user level will be shown on the
upper-right corner.
Entering password
from template

18 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 3BFunctions and operations 2015-07-02
4. If the password is entered incorrectly, it will redirect to the home page as
follows, and the user level will be “Not login”.
5. When users with enough privileges press key INFO on page “65410”, it
will go to the defined target page.
1. Press and hold key ENTER at any page, and it will activate the log in/off
page.
2. If the password is entered correctly, the page where users activate the
password entering page will be displayed, and the corresponding user
level will be shown on the upper-right corner.
3. If the password is entered incorrectly, it will display the following
information:
4. Then re-enter the password. Press key INFO on this page, and it will
redirect to the home page.
Application engineer can configure which password can be changed by
programming in SCOPE.
If the application engineer configured that only the password of end user could be
changed, Change service password and Change factory password template
pages will not be displayed and entered. Press and hold key ENTER on any page
(except the error report pages), and the log in/off page will be displayed:
Entering password by
pressing key ENTER
Password
configuration
For example

19 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building technologies 3BFunctions and operations 2015-07-02
If the application engineer configured that both the password of end user and
service user level could be changed, only Change factory password template
page will not be displayed and entered. Press and hold key ENTER on any page
(except the error report pages) and the log in/off page will be displayed:
For detail information about how to configure the password, refer to Climatix
SCOPE online help.
To change the password of user level, select Change user password and press
key ENTER, and the following page will be displayed:
If the entered passwords do not match, the following page will be displayed:
Then re-enter the password.

20 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 3BFunctions and operations 2015-07-02
4.5 Log off
After logging in with any user level, users can log off from any page. The logoff
procedure is as follows:
1. Press and hold key ENTER on any page to activate the log in/off page.
2. Select Log off and press key ENTER to exit from the current user level. The
home page will be displayed as “Not Login”:
After logging in with one certain user level, it will automatically log off if there is no
operation within a certain period (defined in the controller by application engineer).
4.6 Context helper
The HMI-TM provides contextual help, located in the title line of each page where
needs a helper. For detail information about how to define the title line, refer to
Climatix SCOPE online help.
To display the help information, press key INFO.
The context helper page is fully programmable and should be pre-defined. For
instance, the home page can be defined as the context helper of all HMI-TM pages
by application engineer. In this case, key INFO serves as homepage.