Siemens SISTORE AX8 250/100 V2.8 User manual

Fire Safety & Security Products
Siemens Building Technologies
Digital Video Recorder
SISTORE AX8 250/100 V2.8
SISTORE AX16 250/100 V2.8
Installation Guide

Liefermöglichkeiten und technische Änderungen vorbehalten.
Data and design subject to change without notice. / Supply subject to availability.
© 2008 Copyright by
Siemens Building Technologies
Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger erkennt diese Rechte
an und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen oder
außerhalb des Zweckes verwenden, zu dem es ihm übergeben worden ist.
We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights
and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our
prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.
Copyright
Copyright © 2008 Siemens Fire & Security Products GmbH & Co. oHG. All rights
reserved.
Siemens Fire & Security Products GmbH & Co. oHG confers upon the purchaser
the right to use the software.
It is not permitted to reproduce this manual in whole or in part or translate it into
another language without our written consent.
Trademarks
SISTORE is a trademark of Siemens Fire & Security Products GmbH & Co. OHG.
Contacting us
If you have questions or suggestions regarding the product or this documentation,
please contact your local SIEMENS representative. You can also visit our Web site
at www.siemens.com/sistoreax.

3
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
Contents
1Safety .......................................................................................................5
1.1 Target readers...........................................................................................5
1.2 Work safety information............................................................................5
1.2.1 Transport...................................................................................................5
1.2.2 Installation.................................................................................................6
1.2.3 Service and maintenance .........................................................................6
1.3 Meaning of the written warning notices ....................................................7
1.4 Meaning of the hazard symbols................................................................7
2Directives and standards .......................................................................7
3Technical data.........................................................................................8
4Details for ordering.................................................................................9
5Scope of delivery ....................................................................................9
6Installation.............................................................................................10
7Operation ...............................................................................................11
7.1 Turning on the power..............................................................................11
7.2 Playback commands...............................................................................12
7.3 Front Panel Buttons and LEDs ...............................................................13
7.4 System Setup..........................................................................................14
8Disposal.................................................................................................14

Safety
5
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
1 Safety
1.1 Target readers
The instructions in this document are designed for the following target readers:
Target readers Qualification Activity Condition of the
product
Operational startup
personnel Technical training for building or electrical
installations.
Puts the product into
operation for the first
time.
The product is not yet
installed and
configured.
1.2 Work safety information
zRead the general safety precautions before operating the device.
zKeep this document for reference.
zFollow all warnings and instructions marked on the device.
zAlways pass this document on together with the device.
zAny national or local safety standards or laws that apply to the development,
design, installation, operation or disposal of a product must be adhered to in
addition to the instructions in the product documentation.
Radio interference with other devices in the environment
zThis is a Class A device. This equipment may cause radio interference in a
residential installation. In this case the user is encouraged to perform
appropriate measures to correct the interference.
Liability claim
zDo not connect the device if it is damaged or any parts are missing.
zDo not make any changes or modifications to the device unless they have
been approved by the manufacturer.
zUse only spare parts and accessories that have been approved by the
manufacturer.
1.2.1 Transport
Damage during transport
zDo not expose the device to mechanical vibrations or shocks.
zKeep the packaging material for future transportation.

Safety
6
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
1.2.2 Installation
Damage due to unsuitable mounting location
zThe environmental conditions recommended by the manufacturer must be
observed (see Section 3: Technical data).
zDo not operate the device close to sources of powerful electromagnetic
radiation.
zDo not operate the device in dusty places.
zThe device should only be used for indoor applications.
zDo not expose the device to mechanical vibrations or shocks.
zProtect the device against moisture.
Cable damage due to mechanical load
zMake sure that cables are not under stress, kinked or damaged.
Damage to the device due to lack of ventilation
zDo not block or cover the ventilation openings of the device.
zDo not stack several devices on top of each other and do not place any objects
on the device.
Danger of electrical shock due to incorrect connection
zUse the device only in conjunction with a power supply cable that has been
approved in your country and complies with the national standards.
zThis product is designed for TN power systems and for IT power systems in
Norway with 230 V phase-to-phase voltage. Do not connect the device to any
other IT power systems.
Damage to the device due to overvoltage
zConnect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the type label (see Section 3: Technical
data).
1.2.3 Service and maintenance
Danger of electrical shock during maintenance
zAlways disconnect the power cable and other cables from the main power
supply before performing maintenance.
Danger of electrical shock while cleaning the device
zDisconnect the device from the mains supply before cleaning.
zDo not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.

Directives and standards
7
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
1.3 Meaning of the written warning notices
The severity of a hazard is indicated by the following written warning notices.
Signal word Type of risk
CAUTION There is a risk of minor injuries or damage to property.
1.4 Meaning of the hazard symbols
The nature of the hazard is indicated by icons.
Warning of a hazard
2 Directives and standards
This product complies with the requirements of the following European directives.
The EU declaration of conformity is available to the responsible agencies at:
Siemens Building Technologies
Fire & Security Products GmbH & Co. oHG
76181 Karlsruhe
Germany
European Directive 2004/108/EC ”Electromagnetic Compatibility”
Compliance with the European Directive 2004/108/EC has been proven by testing
according to the following standards:
Emitted interference: EN 61000-6-4
EN 55022 Class A
Interference resistance: EN 50130-4
European Directive 2006/95/EEC ”Low-Voltage Directive”
Compliance with the European Directive 2006/95/EEC has been proven by testing
according to the following standard:
Safety: EN 60950-1

Technical data
8
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
3 Technical data
Video
Signal format PAL or NTSC (auto-detect)
Video input Composite: 8 or 16 looping inputs, 1 Vpp auto-terminating, 75 Ohms
Monitor outputs Composite: 1 BNC, 1 Vp-p, 75 Ohms
SPOT: 1 BNC, 1 Vp-p, 75 Ohms
VGA: 1
Video resolution Composite: 720 x 576 (PAL), NTSC: 720 x 480 (NTSC)
VGA: 800x600 @ 60Hz
Playback/record speed
(images per second) 100 ips (PAL), 120 ips (NTSC)
Inputs / Outputs
Alarm input 8 or 16 TTL, programmable as NC or NO
Alarm output 2 relay outputs, terminal blocks, programmable as NC or NO,
0.5 A @ 125 VAC, 1 A @ 30 VDC
Alarm reset input 1x TTL, terminal block
Internal buzzer 80 dB @ 10 cm
Network connectivity 10/100 Mbps Ethernet (RJ-45)
Connections
Video input Composite: 8 or 16 BNC
Video loop Composite: 8 or 16 BNC (auto-terminating)
Monitor output Composite: 1x BNC
VGA: 1 VGA
SPOT (composite): 1 BNC
Alarm input/output Terminal blocks
Ethernet port RJ-45
RS-232C serial port DB9 (P)
RS-485 serial port 2-connector terminal block
USB port 2 (USB 2.0)
Storage
Primary storage SATA hard disk drive (up to 3)
Secondary storage (optional)* Built-in DVD RW drive
USB hard-disk drive, USB CD-RW drive or USB flash drive
Environmental
Operating temperature 5 – 40 °C (41 – 104 °F)
Operating humidity 0 – 90 %
Power supply
Power 100 - 240 V AC, 2 A, 60/50 Hz
Power consumption 80 W max. (100 W when 3 hard-disk drives are installed)

Details for ordering
9
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
General
Dimensions (WxHxD) 430 x 88 x 405 mm (16.9" x 3.5" x 15.9")
Unit weight 10.2 kg (22.5 lbs)
Shipping weight 12.5 kg (27.6 lbs)
Shipping dimensions (WxHxD) 540 x 290 x 590 mm (21.3" x 11.4" x 23.2")
*) When installing an internal CD-RW drive or DVD RW drive, connect the
SATA I/O cable to the SATA3 socket.
Specifications are subject to change without notice.
4 Details for ordering
Type Order No. Designation Weight
SISTORE AX8 250/100 S54569-C71-B13 SISTORE AX8, 250 GB, 100 ips 10.2 kg
SISTORE AX16 250/100 S54569-C91-B13 SISTORE AX16, 250 GB, 100 ips 10.2 kg
5 Scope of delivery
zDigital video recorder
zPower cord
zUser Manual, Multilingual RAS Software and User Manual on CD-ROM
zMultilingual Installation Guide
zRack-mount kit
zAssembly screws and guide rails for adding hard disk drives

Installation
10
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
6 Installation
CAUTION Always disconnect the power cable and other cables from the main power
supply before installing the device.
The SISTORE AX8/AX16 is designed to work with a variety of other equipment.
The basic system will consist of a video camera and system monitor.
Refer to the User Manual CD for details of installing each type of equipment.
Fig. 1 SISTORE AX16 rear panel
Step 1:
Video In: Connect cameras (up to 8/16) to camera BNC inputs. If looping is
required, connect camera out to second source (second BNC).
Step 2:
Video Out: Connect a monitor to a composite video output for multi-screen display
and playback.
Step 3:
Power connector: Apply power to the unit.

Operation
11
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
7 Operation
7.1 Turning on the power
The SISTORE AX8/AX16 is operational in approximately 60 seconds after the
power cable is connected to the system. The SISTORE AX8/AX16 may be
powered down by selecting the Shutdown from the System Menu. When shutting
down the DVR, you need to confirm that you want to shut down the unit. No on/off
switch is provided.
Fig. 2 SISTORE AX16 front panel
Display Modes
Press the desired camera number button to view the desired camera image, and
press the Display button repeatedly to toggle between different display formats:
4x4, 3x3, 2x2 and PIP.
Recording
Once you have installed the system following the instructions described in the
User’s Manual, it is ready to record. There is no recording button on the front panel
to initiate recording video. The SISTORE AX8/16 will start recording video
according to the schedule configured by the user and from external and internal
events such as alarm input, motion detection or text-in events.

Operation
12
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
7.2 Playback commands
Camera Buttons (1 to 16)
Pressing the individual camera buttons will cause the selected camera to display
full screen.
Zoom/PTZ Button
Pressing the Zoom/PTZ button zooms in the current image in double on the screen.
Display Button
The button has two functions. First, it toggles between different display formats.
The available formats are: 4x4, 3x3 and 2x2. Second, pressing and holding the
button for two seconds or longer allows you to select which cameras will display on
the Spot monitor.
Group/Sequence Button
Pressing the Group/Sequence button changes the screen from the current camera
group to the next camera group, and the screen displays the page number.
Menu/Cameo Button
Pressing the Menu/Cameo button displays the Search menu. Pressing and holding
the button for two seconds or longer enters the cameo mode. The yellow outline
surrounding the video indicates the active cameo, and pressing the arrow buttons
moves the active cameo. Pressing the desired camera button in the active cameo
edits the cameo and displays the video of selected camera. Pressing the
Enter/Pause button exits the Active Cameo mode. Selecting Exit Group Edit in the
cameo menu displayed when pressing the Menu/Cameo button also exits the Active
Cameo mode.
Playback Button
Pressing the Playback button enters the Playback mode. Pressing the button again
exits the Playback mode. When entering the playback mode, video is paused.
Pressing the Right arrow button plays back video at regular speed. The screen
displays when the DVR is in the Pause mode and the screen displays when the
DVR is playing back video.
Enter/Pause Button
Pressing the Enter/Pause button pauses the video. The screen displays when in
the Pause mode.
Up, Down, Left, Right Arrow Buttons
The Up and Down arrow buttons are used to change numbers by highlighting a
number in the menu and by increasing or decreasing the number’s value.
The Left and Right arrow buttons are used to play back images in the playback
mode. Pressing the Right arrow button plays video at regular speed, and pressing
the button again toggles the playback speed from x2, x3 and x4. Pressing the Left
arrow button plays video backward at high speed, and pressing the button again
toggles the playback speed from x2, x3 and x4.

Operation
13
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
7.3 Front panel buttons and LEDs
Power LED The Power LED is lit when the unit is On.
HDD LED The HDD LED flickers when the DVR is recording or searching video on the hard disk
drive.
Alarm LED The Alarm Out LED is lit when alarm output or internal buzzer is activated.
Network LED The Network LED is lit when the unit is connected to a network via Ethernet.
Clip Copy LED The Clip Copy LED is lit when the DVR is clip-copying.
Camera buttons
(1 to 16) Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 9 are also used to enter passwords.
In the PTZ mode, pressing the button 1 zooms in the screen and the button 2 zooms out
the screen, pressing the button 3 focuses near and button 4 focuses far, and pressing the
button 5 moves to the preset and button 6 saves the preset.
Zoom/PTZ button Pressing the Zoom/PTZ button enters zoom mode and a rectangle appears on the screen.
You can use the arrow buttons to move the rectangle to another area. Pressing the
Enter/Pause button zooms in the image in rectangle. Pressing the Zoom/PTZ button for
two seconds or longer allows you to enter PTZ mode.
Display/Spot button Pressing the Display/Spot button toggles different display formats. The available formats
are: PIP, 2x2, 3x3 and 4x4. Pressing and holding the button for two seconds or longer
allows you to select which cameras will display on the Spot monitor.
Group/Sequence button When in the live mode, pressing the Group/Sequence button changes the screen from the
current camera group to the next camera group, and the screen displays the page
number. Pressing and holding the button for two seconds or longer displays live channels
sequentially.
Menu/Cameo button
Pressing the Menu/Cameo button enters the Setup screen. You will need to enter the
authorized user and password to access Setup. Pressing the button also closes the
current menu or setup dialog box. In the Playback mode, pressing the button displays the
Search menu. Pressing and holding the button for two seconds or longer enters the
cameo mode.
Panic button Pressing the Panic button starts panic recoding of all camera channels, and displays on
the screen. Pressing the button again will stop panic recording.
Clip Copy button Pressing the Clip Copy button allows you to copy video clips.
Alarm button The Alarm button has two functions. First, it will reset the DVR’s outputs including the
internal buzzer during an alarm. Second, it will display the event log when you are in the
live monitoring mode unless there is an active alarm. This operation can be user password
protected.
Playback button
Pressing the Playback button enters the playback mode, and pressing the button again
exits the playback mode. When entering the playback mode, video is paused. Pressing
the Right arrow button plays back video at regular speed. The screen displays when the
DVR is in the Pause mode and the screen displays when the DVR is playing back video.
Enter/Pause button
In the live monitoring mode, pressing the button freezes the current screen and the screen
displays icon. When in the playback mode, pressing the button pauses playing video.
When in the setup mode, pressing the button selects a highlighted item or completes an
entry that you have made.
Up, Down, Left, Right Arrow
buttons These buttons are used to navigate through menus and GUI.
The Up and Down arrow buttons are also used to change numbers by highlighting a
number in the menu and by increasing or decreasing the number’s value.
The Left and Right arrow buttons are also used to play back images in the playback mode.
Pressing the Right arrow button plays video at regular speed, and pressing the button
again toggles the playback speed from x2, x3 and x4. Pressing the Left arrow button plays
video backward at high speed, and pressing the button again toggles the playback speed
from x2, x3 and x4.

Disposal
14
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
7.4 System setup
The front panel buttons are used to enter system commands and for programming.
Press Menu/Cameo button on the front panel and enter the password by pressing
the appropriate combination of Camera number buttons and then the Enter/Pause
button. Refer to the User’s Manual for the setup instructions in detail. The
documentation is located on the CD or in the application folder on the PC hard disk
(C:\SISTORE AX\…).
Setup menu
8 Disposal
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by
the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent
potential negative consequences for the environment and human health. It is a
precondition for reuse and recycling of used electrical and electronic equipment. For
more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.

Issued by
Siemens Building Technologies
Fire & Security Products GmbH & Co. oHG
D-76181 Karlsruhe
www.sbt.siemens.com
© 2008 Copyright by
Siemens Building Technologies
Data and design subject to change without notice.
Supply subject to availability.
Document no. A6V10230360
Edition 08.12.08

Fire Safety & Security Products
Siemens Building Technologies
Digitaler Bildspeicher
SISTORE AX8 250/100 V2.8
SISTORE AX16 250/100 V2.8
Installationsanleitung

Liefermöglichkeiten und technische Änderungen vorbehalten.
Data and design subject to change without notice. / Supply subject to availability.
© 2008 Copyright by
Siemens Building Technologies
Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger erkennt diese Rechte
an und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen oder
außerhalb des Zweckes verwenden, zu dem es ihm übergeben worden ist.
We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights
and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our
prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.
Copyright
Copyright © 2008 Siemens Fire & Security Products. Alle Rechte vorbehalten.
Siemens Fire & Security Products überträgt dem Käufer das Recht zur Benutzung
der Software.
Dieses Handbuch darf ohne unsere schriftliche Einwilligung weder ganz noch
teilweise reproduziert oder in eine andere Sprache übersetzt werden.
Warenzeichen
SISTORE ist ein Warenzeichen von Siemens Fire & Security Products.
Microsoft ist ein eingetragenes Warenzeichen und Windows ein Warenzeichen der
Microsoft Corporation. Alle anderen Produkte oder Unternehmen, auf die in diesem
Handbuch ausdrücklich Bezug genommen wird, werden nur zum Zwecke der
Bezeichnung und/oder Beschreibung erwähnt und sind unter Umständen
Warenzeichen oder eingetragene Warenzeichen ihrer jeweiligen Eigentümer
Kontaktaufnahme
Bei Fragen oder Vorschlägen in Bezug auf dieses Produkt oder diese
Dokumentation wenden Sie sich bitte an Ihren zuständigen SIEMENS-Vertreter.
Oder Sie besuchen unsere Website unter http://www.siemens.com/sistoreax.

19
Siemens Building Technologies DE
Fire Safety & Security Products 12.2008
Inhalt
1Sicherheit...............................................................................................21
1.1 Zielgruppe...............................................................................................21
1.2 Sicherheitshinweise ................................................................................21
1.2.1 Transport.................................................................................................21
1.2.2 Installation...............................................................................................22
1.2.3 Instandhaltung und Wartung...................................................................22
1.3 Bedeutung der schriftlichen Warnhinweise.............................................23
1.4 Bedeutung der Gefahrensymbole...........................................................23
2Richtlinien und Normen .......................................................................23
3Technische Daten .................................................................................24
4Bestellangaben......................................................................................25
5Lieferumfang .........................................................................................25
6Installation.............................................................................................26
7Bedienung..............................................................................................27
7.1 Einschalten des Gerätes.........................................................................27
7.2 Wiedergabefunktionen............................................................................27
7.3 Tasten und LEDs an der Frontseite........................................................29
7.4 Systemkonfiguration ...............................................................................30
8Entsorgung............................................................................................30