Siemens HiPath 8000 User manual

Communication for the open minded
Siemens Enterprise Communications
www.siemens-enterprise.com
Documentation
HiPath 8000
OpenStage 60/80
Quick Reference Guide
oi.book Seite 1 Mittwoch, 20. Juli 2011 12:08 12

Using Your Telephone
2
Using Your Telephone
Function Keys and Audio Keys
Mode keys and TouchSlider
Shining blue: mode is active
Shining white:
for call lists: new entry in call list
for voicemails: new voicemail
To u c h g u i d e
Programmable sensor keys on the display
qStart voice dialing
rActivate/deactivate forwarding
sEnd (disconnect) call
pTurn microphone on/off
oTurn headset on/off
nTurn speaker on/off
tTelephony interface
uPhonebooks
wCall lists
xVoicemails
vService/Applications menu
yHelp function
Run finger over TouchSlider:
Depending on situation, set
volumes for ringer or
speaker
X
Press mkey:
- Scroll upwards
Hold down:
- Scroll to beginning of list
Press lkey:
- Scroll downwards
Hold down:
- Scroll to end of list
Press gkey:
- Call up the context menu
- Go down a level
Press hkey:
- Cancel function
- Delete character
left of cursor
- Go up a level
Press ikey:
- Confirm input
- Perform action
Run finger over inner edge of ring W:
- Scroll through lists and menus
- Adjust volume
Keys
Label
S inactive
R lit
T flashing
oi.book Seite 2 Mittwoch, 20. Juli 2011 12:08 12

Using Your Telephone
3
Entering Phone Numbers and Text
Keypad
In situations where text entry is possible, you can use the dial keys to enter text, punctua-
tion and special characters. To do this, press the numerical keys repeatedly.
Extra asterisk and pound key functions:
Display keyboard
Depending on the context, the display keyboard is displayed with different elements.
Using the display keyboard:
WShift focus to other element
gShift focus to "OK"
iSelect element
Key Function during text input Function when held down
*Write special characters Deactivate the ring tone.
#Switch between upper/lower case and digit entry. Activate telephone lock.
Element with focus
Letters, digits, punctuation or special characters
Changes
Switch to number input
Switch to upper/lower case
Insert clipboard contents at cursor position
Move cursor left/right
Switch to punctuation and special characters
Copy content of active field to the clipboard
oi.book Seite 3 Mittwoch, 20. Juli 2011 12:08 12

Using Your Telephone
4
Display
Components
Symbols
Application tab
Telephony interface
Phonebooks
Call lists
Voicemail
Menu
Help function
Status bar
The ring tone is deactivated
The "Do not disturb" function is activated
The phone lock is activated
One or more callback requests are active
The Bluetooth function is activated
A mobile user is logged on to the telephone[1]
Message icons
You have received one or more new messages
One or more new entries have been added to the call lists
Call forwarding is active
Status bar
Ta b ( a c t i ve )
Selected entry
(e.g. call lists)
Context menu
Selected entry
in context menu
Missed Dialled
10:23 Mon 10/23/06 54321
Dial
Details
Delete
List options
Marie Curie
Einstein, A
Joseph von Fr.
oi.book Seite 4 Mittwoch, 20. Juli 2011 12:08 12

Using Your Telephone
5
Frequent call states
The call is active
The call has been disconnected
You have placed the call on hold (e.g. consultation hold)
Your call partner has placed the call on hold
{The voice connection is secure
}The voice connection is not secure.
Multi-line
Call for the corresponding line
Call for a line with suppressed ring tone
"Hold reminder" is activated
The line is currently not available
The line is busy
Phonebook icons
Primary business number
Secondary business number
Mobile phone number
Private phone number
[1] This function is not yet available.
oi.book Seite 5 Mittwoch, 20. Juli 2011 12:08 12

Important Operating Procedures
6
Important Operating Procedures
In Idle State
Answering a call with the handset
ZZ^
Answering a call in speakerphone mode
ZZn
Rejecting a call
ZZf"Reject" i
Deflecting a call
ZZf"Deflect" iZj destination phone number i
Dialing from the caller list
w("Missed" tab, press repeatedly for "Dialled", "Received", "Forwarded")
Zf desired entry i
Activating callback
j destination phone number iZif no answer or busy: f"Call back" i
Saving a phone number to a key
SHold down programmable key Zf"Normal" or "Shifted" Zf"Selected dialling" i
Zf"Label" iZjEnter name, e.g. Peter Zf"Setting" i
Zjdestination phone number Zf"Save & Exit" iZt
Dialing a saved number
Ssaved phone number Z^
^Lift handset jEnter text or number
\Replace handset fSelect entry
[Conduct call gOpen context menu
ZRing tone/call waiting tone ZNext step in procedure
oi.book Seite 6 Mittwoch, 20. Juli 2011 12:08 12

Important Operating Procedures
7
Saving a function to a key
SHold down programmable key Zf"Normal" or "Shifted" i
Zfselect function i(for functions with phone number: Zf"Setting" i
Zjenter the phone number) Zf"Save & Exit" i Zt
Redialing a number
iZf"Redial" ZiZ^
Programming call forwarding
rZf"Edit call forwarding" iZf"Destination" (e. g. under "All calls") i
Z"Edit favourites" iZf"Destination 1" iZjphone number i
Zf"Option: Save & Exit" i Zf"All calls" iZf"On" iZf"Save & Exit" i Zt
Turning call forwarding on/off for all calls
r
oi.book Seite 7 Mittwoch, 20. Juli 2011 12:08 12

Important Operating Procedures
8
During Calls with a Party A
Switching to speakerphone mode
Hold down nZ\(US only: nZ\)
Consultation
gZ"Consultation" iZ j phone number for party B iZ[party B Zg
Z"Disconnect & return" iZ[party A
Accepting call waiting
ZCall waiting tone Zf"Accept" iZ[party B Zfparty B Zg
Zf"Disconnect & return" iZ[party A
Deflect call on call waiting
ZCall waiting tone Zf"Deflect" iZ j phone number for party B iZ[party A
Start conference
gZ"Consultation" iZ j phone number for party B iZ[party B Zg
Zf"Conference" iZ[party A and B
Start conference on call waiting
ZCall waiting tone Zf"Accept" iZ[party B ZgZf"Conference" i
Z[party A and B
Blind transfer to party B
gZf"Consultation" iZjdestination phone number iZ\
Transfer after consultation
gZf"Consultation" iZ j phone number for party B iZ[party B Z\
oi.book Seite 8 Mittwoch, 20. Juli 2011 12:08 12

Copyright © Siemens Enterprise
Communications GmbH & Co. KG
Hofmannstr. 51
80200 München
Deutschland
Siemens Enterprise
Communications GmbH & Co. KG
is a Trademark Licensee of Siemens AG
Reference No:
A31003-S2000-U111-4-7619
The information provided in this document
contains merely general descriptions or char-
acteristics of performance which in case of
actual use do not always apply as described
or which may change as a result of further
development of the products.
An obligation to provide the respective char-
acteristics shall only exist if expressly agreed
in the terms of contract. Availability and
technical specifications are subject to
change without notice. OpenScape,
OpenStage and HiPath are registered trade-
marks of Siemens Enterprise
Communications GmbH & Co. KG.
All other company, brand, product and ser-
vice names are trademarks or registered
trademarks of their respective holders.
Siemens Enterprise Communications
www.siemens-enterprise.com
Communication for the open minded
oi.book Seite 9 Mittwoch, 20. Juli 2011 12:08 12