Siemens SIREMOBIL Compact User instructions

SIREMOBIL Compact
Register 3 English
Print No.: SPR2-130.033.03.04.02 Doc. Gen. Date: 04.01
Replaces: SPR2-130.033.03.03.02
© Siemens AG 1997
The reproduction, transmission or
use of this document or its contents
is not permitted without express
written authority. Offenders will be
liable for damages. All rights,
including rights created by patent
grant or registration of a utility
model _or_design,_are_reserved.
SIREMOBIL Compact L
SIREMOBIL Compact as of
Serial Number 02001
SP
Installation and Setting Instructions
Installing and setting the Video recorder

SIREMOBIL Compact Register 3 SPR2-130.033.03 Page 2 of 4 Siemens AG
Rev. 04 04.01 TD SD 24 Medical Engineering
2 Installing and setting the Video Recorder1
General 1
Safety information 1
Checks and adjustments which must be performed with radiation switched ON are identi-
fied by the radiation warning symbol . During these types of adjustments, radiation pro-
tective clothing must be worn.
Protective conductor test 1
Perform the protective conductor test according to ARTD - 002.731.17... after completing
all work and reinstalling all covers.
The protective conductor resistance must not exceed 0.2 ohms.
Additional Information 1
These instructions apply to retrofitting a video recorder on a SIREMOBIL Compact system
with Memoskop C / Memoskop C & MOD / Memoskop C-SUB /
Memoskop C-SUB & MOD only.
Materials required 1
Measurement and auxiliary devices required 1
Tools required 1
•Tool kit(see ARTD /part 3)
•1 set of Allen keys
When performing service work and tests, adhere to the product-specific
safety information contained in the documents as well as the general
safety information contained in the ARTD part 2.
•Videorecorderconnectionkit 31 00 489 G5437
•ServicePC
•Digital-Multi-Meter DMM
•Servicesoftware(seeLog book)
•Connectingcable(from servicePCtohost) 99 00 440 RE999
•Protectiveconductormeter 44 15 899 RV 090
CAUTION

Installing and setting the Video Recorder 3
Siemens AG Register 3 SPR2-130.033.03 Page 3 of 4 SIREMOBIL Compact
Medical Engineering Rev. 04 04.01 TD SD 24
Line voltage cable 1
Video tape recorder with 100VAC line voltage:
•Connectthe linewiresto transformerT1,connectorTI -34andTI- 36.
•Connectthe protectiveconductorto the protectiveconductorterminalstripe(ye/gn).
Video tape recorder with 120VAC line voltage:
•Connectthe linewiresto transformerT1,connectorTI -35andTI- 36.
•Connectthe protectiveconductorto the protectiveconductorterminalstripe(ye/gn).
Video tape recorder with 230VAC line voltage:
•Connectthe video recorderline wiresat terminalsX2.1 and X2.2.
•Connectthe protectiveconductorto the protectiveconductorterminalstrip (ge/gn).
•Routethevideo recorderline wiresto the video recordercompartment.
Remote Release 1
•Connectthe suppliedcontrolcableto theMEMOSKOP.
•Connectthe cable end tothe video recorder.
Video cable 1
With an existing multiformat camera or video printer 1
•Removethe75Oterminationfromthevideo outputofthemuliformatcameraorswitchoff
the75Otermination forthevideo printer.
•Connectthevideo cableatthevideooutputofthemultiformatcameraorthevideoprinter
androutethe cable to thevideo recordercompartment.
•Connectthe video recorderinput.Ensure75O terminationof the videocable.
•Connectthe video recorderoutputtotheMEMOSKOPvideo recorderinput.
Disconnect the SIREMOBIL Compact line voltage cable prior to
beginning work.
SIREMOBIL Compact units from serial numbers >1300 include at the
secondary side of the transformer T1 connectors for line voltages of
100VAC and 120VAC. A released video tape recorder with the corre-
sponding line voltage can be connected to these connectors.
At the SIREMOBIL Compact with serial numbers 01001 to 01299, only
released video tape recorders with a needed line voltage of 230VAC can
be connected.
CAUTION
Notice

SIREMOBIL Compact Register 3 SPR2-130.033.03 Page 4 of 4 Siemens AG
Rev. 04 04.01 TD SD 24 Medical Engineering
4 Installing and setting the Video Recorder
Without a multiformat camera or video printer 1
•Connectthe video cabletoMemoskop connector"Out3".
•Routethevideo cable tothevideo recordercompartment.
•Connectthe video recorderinput.Ensure75O terminationofthevideocable.
•Connectthe video recorderoutputto theMEMOSKOPvideorecorderinput.
Programming 1
•Switchthe systemon.
•Simultaneouslypresskeys [CTRL]and[U]on the memory keyboard.
➪This calls the User Setup menu for Memoskop.
•Configurethe video recorderoutputformonitorA.
(Performthe configuration for monitorB only by specialcustomer request).
•Endtheusermenu.
•Switch the SIREMOBIL Compact offand onagain to activate the new configuration.
Function check 1
•Setthevideo recorderto record.
•WithFluoro,movethe collimatorbladesslightly into the field.
Releasefluoroforapproximately20seconds.
•Stopthevideo recorderand rewindthe tape.
•Replaythe scene.
Concluding work 1
•SwitchOFFtheSIREMOBIL.
•Checktheprotectiveconductorfunctionusing theprotective conductormeter44 15 899
RV. Referalso toTI 236 /ARTD - 002.731.17...
Changes to previous version 1
Page 3: Paragraph "Line voltage cable" changed.
TD SD 24 / Fürstenberg TD SD 24 / Groß SMS Iselin / Ristau