Silhouette Titan Dynamics Contour 5540 Owner's manual

Titan Dynamics
Contour 5540
Technical
Instructions

Titan Dynamics Contour | Glazing with Silhouette Vision
Sensation®Lenses
Silhouette now offers premium prescription lenses
for all Silhouette frames.
Expertly crafted in Austria using our exclusive
Panorama®lens designs, Silhouette Vision Sensation®
lenses perfectly match the curve of every Silhouette
frame.
This results in a complete visual solution that offers
the wearer exceptional visual comfort and edge to
edge clarity.
For more information visit:
https://www.silhouette.com/us/us/vision-sensation
or contact your Silhouette Account Executive

Mount lenses using BLS 58 sleeve and Silhouette mounting plier with turquoise or
blue tip.
Titan Dynamics Contour | Glazing

Titan Dynamics Contour | Glazing
Frame is designed with a 5.0 base curve
Other base curves will work and will require bridge adjustment
Recommended lenses are High Index 1.6, 1.67, Polycarbonate and Trivex
Patterns available from Silhouette customer service at 800-223-0180
OMA shape files available at
https://portal.silhouette.com
www.silhouettelab.com

Titan Dynamics Contour | Inclination
1. Open the temple.
2. Support lens mounting
firmly with the mounting
pliers.
3. Hold end piece firmly
and adjust inclination
into the required
position.

Titan Dynamics Contour | Temple opening
enlarge
1. Open the temple.
2. Support lens fixation firmly
with mounting pliers.
3. Press the temple outward
with your thumb.

Titan Dynamics Contour | Temple opening
reduce
1. Open the temple.
2. Support lens fixation firmly
with mounting pliers.
3. Press the temple inward
with your index finger.

Titan Dynamics Contour | Temple Bend
1. Adjust the temple to the
ear shape with large
curves.
2. During temple-end
adjusting do not put
pressure on the temple
tip.

Titan Dynamics Contour | Temple shortening
Pull off temple end.

Titan Dynamics Contour | Temple shortening
1. Shorten titanium wire with metal-diagonal cutter.
2. File down sharp edges and burrs

Titan Dynamics Contour | Temple shortening
Squeeze titanium wire
with round pliers at the
very end.

Titan Dynamics Contour | Temple removal
1. Place the red-multi tool or the new blue multi-tool near the hinge.
2. Close hinge to rest on the multi-tool.
3. Place pressure on temple directly behind the multi-tool until the temple
snaps out of the hinge.

Titan Dynamics Contour | Temple mounting
Align the temple with
the hinge and press it
in with your index
finger.