Silhouette Titan Minimal Art Must Collection 2017... Owner's manual

TMA Must Collection 2017

Technical Instructions | TMA Must Collection
2017

3
Titan Minimal Art Must 2017 - Glazing
Frame is designed with 5.0 base curve
Other lens base curves can be used and will require bridge adjustment
Recommended lenses are High Index 1.60, 1.67, Polycarbonate and Trivex
Use Silhouette mounting plier with blue tip and BLS 40 mounting sleeve
OMA shape files and drill coordinates are available at www.silhouettelab.com
Patterns are available from customer service at 800-223-0180

4
Titan Minimal Art Must 2017| Inclination
1. Open the temple.
2. Hold lens mounting firmly with the mounting pliers.
3. Hold end piece firmly and adjust inclination into the
required position.

5
Titan Minimal Art Must 2017| Enlarging temple opening
Hold lens fixation firmly with your fingers and use the red
multi-tool to enlarge the temple opening

6
Titan Minimal Art Must 2017| Reducing temple opening
Hold lens fixation firmly with your fingers and use the red
multi-tool to reduce the temple opening.

7
Titan Minimal Art 2017| Adjustment
Adjust the temple to the ear shape with large curves. During temple end
adjusting do not put pressure on the temple tip!

8
Titan Minimal Art Must 2017| Temple shortening
Pull off temple end

9
Titan Minimal Art Must 2017 | Temple shortening
1. Shorten titanium wire with metal-diagonal cutter
2. File down sharp edges and burrs to ensure temple tip can be
reinstalled properly

10
Titan Minimal Art Must 2017| Temple shortening
Squeeze titanium wire with round pliers at the very end to
recreate the locking mechanism.