Silhouette Titan Minimal Art Series Owner's manual

Titan Minimal Art
Technical Instructions
2013

Inclination
1. Hold titanium temple firmly at approx. 5 mm next to lens fixation.
2. Adjust inclination at the beginning of the flat stamped part of the titanium temple but not
beside lens fixation.
3. Attention: do not bend temple!
Inclinate here
Picture shows exact
position of inclination

Inclination
Inclinate here
1. Hold titanium temple at firmly approx. 5 mm beside the lens fixation.
2. Adjust inclination at the beginning of the flat stamped part of the titanium temple
but not beside lens fixation.
3. Attention: do not bend temple!
Picture shows
handling procedure

Temple Shortening
Pull off
temple end
File down
sharp edges
Squeeze
metal inlay
with round
pliers
at the very
end.
Mount
temple end.
Shorten
temple with
diagonal
cutter
2
1
3 4

Do not over stretch or twist titanium temples as this may cause breakage.